• Journal of the Korean Applied Science and Technology
• /
• v.30 no.3
• /
• pp.528-539
• /
• 2013

Biodiesel is one of the most important renewable energy, since it is one of the most important alternative and eco-friendly energy source compared to fossil energy, especially for diesel engineequipped vehicles. It is now coming up for preparation of biodiesel as the alternative that applies the hetrogeneous catalyst, super critical state and various methods used in order to reduce the stages of the processes be converted and separation stages started from oil and fat which are originated from animals and wastes, and those new methods bring eco-friendly as well, though some of those are stand on research step so far. It is necessary that nation provides the tax exemption program for the supplier and strengthen the research system for the farming crops relate to fat and oil. It can improve the development of biodiesel which sustains stability against oxidation and keeps good mobility over the low temperatures in the winter season by new additives and develops new processes to show good harmony with diesel engine.

• Environmental Engineering Research
• /
• v.20 no.3
• /
• pp.212-222
• /
• 2015

Experiments were conducted on the immobilization of eight heavy metals (HMs) (Zn, Cu, Mn, Fe, Ni, Pb, Cd, and Cr) during 20-day rotary drum composting of water hyacinth. The Tessier sequential extraction procedure was used to investigate the fractionation of HMs. The eco-toxicity risk of HMs was assessed by risk assessment code (RAC). In the results, the bioavailability factor (BAF) for different HMs presented in the following order: Mn > Zn = Fe > Cu > Cr > Cd = Pb > Ni. The total concentration of Pb was higher than that of Zn, Cu, Mn, Cd and Cr; however, its BAF was the lowest among these HMs. These results confirmed that the eco-toxicity of HMs depends on bioavailable fractions rather than on the total concentration. The greatest reduction in bioavailability and eco-toxicity risk of HMs occurred in lime 1% and 2% as compared to control and lime 3%. The eco-toxicity risk of Fe, Ni, Pb, Cd and Cr was reduced from low risk to zero risk by rotary drum composting. These studies demonstrated the high efficiency of the rotary drum for degrading compost materials and for reducing the bioavailability and eco-toxicity risk of HMs during the composting process.

• Journal of Distribution Science
• /
• v.15 no.5
• /
• pp.17-28
• /
• 2017

Purpose - Considering the environmental issues in corporate management is now a necessity, not an option. In addition, consumers' interest in health and environment has increased rapidly. This study aims to investigate how the management style that pursues environmental protection affects the various outcomes at each management process such as planning, producing and supervising process. Research design, data, and methodology - We surveyed 319 manufacturing companies from April 1 to April 30, 2016. Green purchasing, environmental technology management and management support are selected as independent variables and firm performances as dependent variables. Three analyses including factor, regression and moderating were conducted. Results - Regression analysis was performed to set up hypotheses. Consequently, the total six hypotheses were adopted and then innovative management style showed moderating effect. Conclusions - Companies should consider environmental factors to improve the financial performance in the long term. Especially the cooperative style enhances financial performance by implementing eco-friendly design in cooperation with customers. Also, eco-friendly activities with suppliers could have direct environmental protection effects. Therefore, a manufacturer needs to cooperate with both suppliers and customers to maximize the protection effect. The production of eco-friendly products and implementing eco-friendly design with customers positively affect product quality.

• Journal of Environmental Science International
• /
• v.22 no.3
• /
• pp.281-289
• /
• 2013

For the purpose of evaluating the eco-efficiency(EE) on surplus heat generated from industrial process, techniques of life cycle assessment are adopted in this study. Because it can be indicated both environmental impacts and economic benefits, EE is well known as a useful tool for symbiosis network on the sustainable development of new projects and businesses. To evaluate environmental impacts, the categories were divided into two areas of resource depletion and global warming potential. It can be seen that environmental impact increased a little but much higher economic benefit on the company, environmental performance and economic value were improved on the apartment by the district heating, respectively. In result, eco-industrial park(EIP) project on surplus heat should be found sustainable new business because the EE was in the area of fully positively eco-efficiency and, moreover resource depletion was taken place than the reduction of greenhouse gas.

• Journal of Environmental Science International
• /
• v.21 no.5
• /
• pp.545-553
• /
• 2012

Eco-efficiency considers both environmental impacts and economic values. It is a useful tool for communicating with stakeholders for business decision making. This study evaluated the eco-efficiency factor (EEF) for the energy network of a dyeing company that supplies surplus heat to a neighboring apartment during the night. This symbiosis network is one of the eco-industrial park (EIP) projects in Korea and aims to benefit local residents and the industrial complex by utilizing surplus heat. In this study, two categories were annualized. The first quantified environmental burden based on $CO_2$ emissions and quantified product value in terms of steam sales. The second used a variety of environmental factors, such as fossil fuel, water and waste, to quantify environmental burden and used steam sales to quantify value. The EEF of the symbiosis network was 1.6, using the global warming impact, and determined using the multiple variable, was 1.33. This study shows that the EEF depends on variable details of environmental burden but the values of this project were very high contrast to other business or EIP project.

• Journal of the Korean Institute of Educational Facilities
• /
• v.26 no.4
• /
• pp.27-34
• /
• 2019

Recently the architectural paradigm have been changing into eco-friendly architecture as an sustainable architecture. This social background encourages the development of various methods of building applicable for eco-friendly buildings in architectural design. Among them, passive architecture is an design approach for eco-friendly design that contrasts with technology-based methods through MEP for renewable energy. This study researches the Passive Architectural Design methodology with two points of view; Passive Architectural Design Techniques as a guideline, which defines the elements to consider for passive architecture, and the project of Sejong Municipal Public Library as a case, which is to analysis the architectural design process. The purpose of this study is to propose an eco-friendly public building based on the methodology which is suitable for passive architectural design. Finally, this study suggests that the eco-friendly public building design for passive architecture should consider from the early step of design process, such as concept and building form etc. What is important for the passive architecture is not how much building can produce the natural energy but how less building consumes it to maintain.

• Weed & Turfgrass Science
• /
• v.4 no.2
• /
• pp.118-123
• /
• 2015

Metagenomics is a powerful tool to isolate novel biocatalyst and biomolecules directly from the environmental DNA libraries. Since the metagenomics approach bypasses cultivation of microorganisms, un-cultured microorganisms that are majority of exists can be the richest reservoir for natural products discovery. To discover novel herbicidal substances from soil metagenome, we established three easy, simple and effective high throughput screening methods such as cucumber cotyledon leaf disc assay, microalgae assay and seed germination assay. Employing the methods, we isolated two active single clones (9-G1 and 9-G12) expressing herbicidal activity which whitened leaf discs, inhibited growth of microalgae and inhibited root growth of germinated Arabidopsis seeds. Spraying butanol fraction of the isolated active clones' culture broth led to growth retardation or desiccation of Digitalia sanguinalis (L) Scop. in vivo. These results represent that the screening methods established in this study are useful to screen herbicidal substances from metagenome libraries. Further identifying molecular structure of the herbicidal active substances and analyzing gene clusters encoding synthesis systems for the active substances are in progress.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.3 no.2
• /
• pp.10-23
• /
• 2000

The purpose of this research was to investigate water spaces such as marshes and watercourses, especially focusing on methods to establish eco-ponds. Many aqua-ecosystems have been filled up or destroyed in the process of rapid industrialization and urbanization in the cities. This inquiry was done by comparing, studying and analyzing existing ponds and studying documents on the introduction and methods of making eco-ponds. Existing ponds were put into three categories as the either eco-pond, man-made/natural ponds, or man-made ponds. Three instances were selected for each category, totaling nine. Data on the size and shape, depth, waterproofing techniques, water supply, plants and planting plan, and the maintenance of the ponds was collected and compared. The following are conclusions based on comparing, studying and analyzing these existing ponds, and studying documents on the introduction and methods of making eco-ponds. ${\cdot}$ It is noteworthy that different environments and depths must be provided because these are main variants contributing to attracting plants in the ponds. ${\cdot}$ In these places plants emerged, such as, floating-leaved plants, free-floating planktonic plants, submerged plant etc, in the different water level zones, once these various conditions were provided. ${\cdot}$ Various spaces can be used for shelter, places for relaxation and habitation. ${\cdot}$ After establishing a pond, routine maintenance is necessary for preventing eutrophication. However the minimal possible management should be done to maintain a natural status.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.46 no.2
• /
• pp.139-147
• /
• 2010

This study monitored a variety of marine fish communities in artificial reefs unit of the total 5 types (Dice type, Octagonal turtle type, Two-stage tube type, Gazebo type, Tetrapod type) which are located in the marine ranching at Jeju island by scuba diving in May, July, October and December 2009. Underwater photographing was accomplished at total 3 phases (condition of artificial reefs photographing, concentric circle movement photographing and line transect photographing). The preservation condition of artificial reefs facility was very good, and the dominant species were Chromis notatus, Sebastes thompsoni, Oplegnathus fasciatus and Halichoeres poecilopterus. Fish abundance was high in May and June, and low in October and December, 2009. Chromis notatus was dominant at the all types of artificial reefs, Halichoeres poecilopterus for Gazebo type and Tetrapod type of artificial reefs, and Sebastes thompsoni for Dice type, Octagonal turtle type and Two-stage tube type of artificial reefs.

• Korean Chemical Engineering Research
• /
• v.44 no.6
• /
• pp.579-587
• /
• 2006

Recently, each country has been trying to promote Eco-Industrial Park (EIP) development for industrial sustainability. Technological modeling is required to realize EIP practically even though the project contains the political concerns for many companies, government, and self-governing bodies. The four main technologies of the EIP developments include energy exchange, material flow analysis, water pinch, and life cycle assessment. Material flow analysis (MFA) methodology can be utilized in EIP modeling in view of the fact that the analysis of material flows and the optimized modeling are major purposes for the technological modeling of EIP. Through MFA methodology in POHANG EIP project, how to apply MFA modeling to EIP modeling and how to utilize software for MFA modeling are shown in this research.