• Spatial Information Research
• /
• v.17 no.3
• /
• pp.351-359
• /
• 2009

Nowadays, a precision multiple-beam epoch sounder is a depth-sounding apparatus, which is widely used especially for the mapping of bottom of the sea in the coastal area and the bed of river. However, there has been no attempt to verify the accuracy of the depth-sounding apparatus with the data obtained through the actual measurement. As a consequence, the efficient and systematic evaluation of the survey results cannot be performed. In this paper, the accuracy of the multiple beam echo sounder is analyzed by comparing the in-situ measurements and reference data. The test results show that the highest level of accuracy, indicated by IHO, can be achieved even though the magnitude of error increases with the depth of water.

• Journal of the Korean Society of Industry Convergence
• /
• v.24 no.1
• /
• pp.61-67
• /
• 2021

With the recent development of bathemetry technology, the hydrographic surveying method has been changed from single beam depth device use to multi beam acoustic sounding technology. Also, various studies have been reported to obtain high accuracy and precision in the process of river bed topographic data. Especially south korea is geographically on three sides of the sea and the river topography is very developed. To build information about the underwater, and riverbed status, the public investigations has been continuously progressed. In this study, We investigasted the riverbed topography near Baeckma river leisure park. for this purpose, In this study, as the first preliminary survey, location of navigational dangerous objects and reefs and the dangerous areas are identified. Also, ground control points is selected for the optimal GPS surveying. Secondary, through test surveying the Gain, TVG, and pulse length are determined. In addition, the investigation of dangerous objects for navigation is also conducted. As the last step, the error analysis are conducted for the acquired data, and this process involves the removal and adjustments of errors. This section includes the analysis of tide level and navigational contributions, and finally generates a submarine topographic map.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1711-1712
• /
• 2007

액체탱크의 레벨을 정밀측정하는 데 FMCW(Frequency Modulated Continuous Wave)를 이용하고자 한다. 우리는 1GHz 대역폭으로 Sweep하는 Frequency Source Module을 개발하여 테스트 중이다. 개발한 송수신 모듈은 주파수의 송수신을 위한 주요부품들로 구성되는데, VCO(Voltage Controlled Oscillator), 서큘레이터(Circulator), 필터(Filter), 전력분배기(Power Divider), PLL(Phase Locked Loop)제어부, 믹서, 증폭기 등이 그것이다. 이들 부품들이 위치한 RF Board와, 패치로 구성한 안테나를 이용하여 마이크로웨이브 신호를 송수신할 수 있으며, 송수신한 신호 간의 차주파수(beat frequency)성분을 측정하면 거리정보를 획득할 수 있다. 차주파수의 아날로그신호는 DSP를 이용하여 FFT를 수행하여 주파수 성분을 찾아 거리계산을 하도록 개발하였다. 거리 측정의 성능에 영향을 미치는 가장 큰 요소는 안정된 주파수를 만들어 낼 수 있느냐 하는 것이다. 본 논문에서는 제작한 VCO 모듈을 비롯한 개발 중인 각 모듈들을 소개하였다. 향후 VCO의 선형성 개선과, 난반사에 대한 Echo Cancel 알고리듬을 적용하여 제품의 상용화를 목표로 한다.

• The Journal of the Acoustical Society of Korea
• /
• v.32 no.4
• /
• pp.301-307
• /
• 2013

SONAR detection performance is one of the key survivability factors in underwater weapon systems. In order to catch the acoustic ability of SONAR, multilayer SONAR structures are analyzed using the elastic theory. The applied results for the simple models are compared with those from commercial program, ANSYS, and the reliable results are obtained. The analysis of sound pressure level (SPL) and echo reduction (ER) by the thickness change of multilayer SONAR structures are performed using the verified elastic theory. As the thickness of anechoic layer is increased, SPL is distributed evenly and ER is increased slightly with the frequency. In decoupling layers and steel layers, SPL are hardly changed and ER is slightly decreased with the thickness increase of those layers. SPL and ER are not affected by the thickness change of the carbon reinforced plastic (CRP) layer. Therefore, to improve the acoustic ability of multilayer SONAR structures, the thickness increase of the anechoic layer and minimization of the decoupling layer, steel layer and CRP layer are desirable.

• Investigative Magnetic Resonance Imaging
• /
• v.24 no.1
• /
• pp.21-29
• /
• 2020

Purpose: To investigate normal location of the peroneus longus tendon (PL) in the cuboid groove by evaluating it between ankles with no significant abnormality (asymptomatic group) and those with retromalleolar PL dislocation (dislocation group) using three-dimensional isotropic fast spin-echo (3D-FSE) magnetic resonance imaging (MRI) of the ankle. Materials and Methods: Thirty-six and 32 3D-FSE ankle MRI were assigned to the asymptomatic group and the dislocation group, respectively. Using multiplanar reformatted 3D-FSE, qualitative PL location (i.e., outside, overlying, and inside in relation to the cuboid groove), quantitative PL location (i.e., distance between the proximal margins of PL and cuboid groove), and cuboid groove size were measured in lateral, middle, and medial levels of the cuboid groove. Results: In the asymptomatic group, 64%, 42%, and 11%, respectively, had the outside or overlying-located PL in lateral, middle, and medial levels of the cuboid groove and the quantitative location gradually decreased from lateral to medial level. Qualitative and quantitative PL locations were not significantly different between the asymptomatic group and dislocation group. Cuboid groove size showed significant negative correlation with quantitative PL location in both groups. Conclusion: Outside- or overlying-located PL in lateral and middle levels of the cuboid groove would be a normal finding, regardless of PL status at the retromalleolar level.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.46 no.2
• /
• pp.173-183
• /
• 2010

In a split beam echo sounder, the transducer design needs to have minimal side lobes because the angular position and level of the side lobes establishes the usable signal level and phase angle limits for determining target strength. In order to suppress effectively the generation of unwanted side lobes in the directivity pattern of split beam transducer, the spacing and size of the transducer elements need to be controlled less than half of a wavelength. With this purpose, a 50 kHz tonpilz type transducer with a half-wavelength diameter in relation to the development of a split beam transducer was designed using the equivalent circuit model, and the underwater performance characteristics were measured and analyzed. From the in-air and in-water impedance responses, the measured value of the electro-acoustic conversion efficiency for the designed transducer was 51.6%. A maximum transmitting voltage response (TVR) value of 172.25dB re $1{\mu}Pa/V$ at 1m was achieved at 52.92kHz with a specially designed matching network and the quality factor was 10.3 with the transmitting bandwidth of 5.14kHz. A maximum receiving sensitivity (SRT) of -183.57dB re $1V/{\mu}Pa$ was measured at 51.45kHz and the receiving bandwidth at -3dB was 1.71kHz. These results suggest that the designed tonpilz type transducer can be effectively used in the development of a split beam transducer for a 50kHz fish sizing echo sounder.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.11
• /
• pp.5427-5433
• /
• 2012

In this paper a ultrasonic level meter for accurately and simply measuring oil levels of vehicle transmission is developed and its effectiveness is shown by experiments. By using a FPGA, all digital signal processes for the oil level calculation is fulfilled, and the programming on a FPGA project IDE enables very short developing time. And besides, analog circuits including a transmit/receive switch, multi-stage active filters and an envelope detect circuit are designed to process low-level ultrasonic echo signal. Under experiments, the designed level meter has proven to have the accuracy of about within 1[mm] scale.

• Investigative Magnetic Resonance Imaging
• /
• v.3 no.2
• /
• pp.179-187
• /
• 1999

Purpose : This paper introduces a computationally inexpensive context-dependent classification of multi-echo MRI with Bayes compound decision model. In order to produce accurate region segmentation especially in homogeneous area and along boundaries of the regions, we propose a classification method that uses contextual information of local enighborhood system in the image. Material and Methods : The performance of the context free classifier over a statistically heterogeneous image can be improved if the local stationary regions in the image are disassociated from each other through the mechanism of the interaction parameters defined at he local neighborhood level. In order to improve the classification accuracy, we use the contextual information which resolves ambiguities in the class assignment of a pattern based on the labels of the neighboring patterns in classifying the image. Since the data immediately surrounding a given pixel is intimately associated with this given pixel., then if the true nature of the surrounding pixel is known this can be used to extract the true nature of the given pixel. The proposed context-dependent compound decision model uses the compound Bayes decision rule with the contextual information. As for the contextual information in the model, the directional transition probabilities estimated from the local neighborhood system are used for the interaction parameters. Results : The context-dependent classification paradigm with compound Bayesian model for multi-echo MR images is developed. Compared to context free classification which does not consider contextual information, context-dependent classifier show improved classification results especially in homogeneous and along boundaries of regions since contextual information is used during the classification. Conclusion : We introduce a new paradigm to classify multi-echo MRI using clustering analysis and Bayesian compound decision model to improve the classification results.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.4
• /
• pp.28-39
• /
• 2014

Several studies have been performed globally on the construction of integrated systems that are available for the integrated use of 3D geographic information on terrain and oceans. Research on 3D geographic modeling is also facilitated by the application of Lidar surveying, which enables the highly accurate realization of 3D geographic information for a wide area of land. In addition, a few marine research organizations have been conducting investigations and surveying diverse ocean information for building and applying MGIS(Marine Geographic Information System). However, the construction of integrated geographic information systems for both terrain and oceans has certain limitations resulting from the inconsistency in reference systems and datum levels between two data. Therefore, in this investigation, integrated geospatial information has been realized by using a combined topographical map, after matching the reference systems and datum levels by integration of airborne Lidar data and multi-beam echo sounder data. To verify the accuracy of the integrated geospatial information data, ten randomly selected samples from study areas were selected and analyzed. The results show that the 10 analyzed data samples have an RMSE of 0.46m, which meets the IHO standard(0.5m) for depth accuracy of hydrographic surveys.

• Journal of Korean Home Economics Education Association
• /
• v.29 no.4
• /
• pp.101-116
• /
• 2017

This study aimed to investigate the determinants of confidence in courtship and marriage, childbirth and parenting of the unmarried employed of the echo boomers born between 1982-1992, using data from the 19th wave of the nationwide Korea Labor and Income Panel Study. The differences of confidence in courtship, marriage, childbirth, and parenting of the echo boomers according to sociodemographic variables, psychosocial variables, workplace related variables were examined and multiple regression analysis was conducted in order to identify the factors that affect the confidence in courtship and marriage, childbirth and parenting. The results were as follows: The level of confidence in courtship and marriage, childbirth and parenting showed a statistically significant difference depending upon socioeconomic status and psychosocial variables. However, among the workplace related variables, other than childbirth and parenting within the job satisfaction category, all other variables showed a statistically significant difference. In addition, as the determining factors affecting all issues of courtship, marriage, childbirth, and parenting, youth perceptions of Korean society revealed to be the most influential factor, followed by social support and organizational commitment.