• Korean Journal of Environmental Agriculture
• /
• v.18 no.3
• /
• pp.215-220
• /
• 1999

Behaviour of a fungicide $^{14}C-propiconazole$ was investigated in a rice plant grown-lysimeter soil. The lysimeter was composed of soil cores of silty clay. $Propiconazole(Tilt\;250^R\;EC)$ plus $^{14}C-labeled$ propiconazole was applied on the surface of lysimeter soil at a rate of 0.12kg/10a after rice transplanting. The application was done consecutively for two years. The behaviours of propiconazole in the lysimeter soil were investigated by measuring the amounts of $^{14}C-leachate$, $^{14}CO_2$, the residues distributed in each soil segment and taken up by rice plants. The relative amounts of $^{14}C$ leached from the lysimeter were the background level of the applied $^{14}C$ throughout expeiment. The amounts of $^{14}CO_2$ evolved from the lysimeter were 5.7 and 7.8% of the original $^{14}C$ in the 1st and 2nd treatment, respectively. The amounts of volatile substances soil were the background level throughout experiment, which indicated that propiconazole was stable chemically in the experimental condition. The $^{14}C-activities$ absorbed and translocated into rice plants were 3.7 and 7.6% in 1st and 2nd treatment, respectively. The $^{14}C-activities$ in the soil layer of the lysimeter was distributed mainly in the depth of 0 to 20cm, which suggested propiconazole did not have the risk of groundwater contamination.

• Korean Journal of Ecology and Environment
• /
• v.43 no.2
• /
• pp.232-241
• /
• 2010

Epilithic diatom communities and water quality were monitored to evaluate the ecological impact of the inflow of Wonju-stream passing through the urban area in the Seom River Watershed. We selected the 14 sampling stations (5 main stream sites and 9 tributary sites), and collected diatom and water samples between October 2007 and September 2008, on the seasonal basis. The results indicate that most water quality parameters showed the site-specific patterns over the study, except for water temperature and dissolved oxygen. The levels of water quality parameters were highest at the site of Wonju stream, whereas the lowest in the upstream sites, and intermediate or gradually decreased in the downstream sites of the Seom river. One species, Achnanthes convergens, showed the highest biomass and frequency over the sites, while three saprophilous species-Navicula goeppertiana, Navicula subminuscula, Nitzschia palea were appeared only in Wonju Stream and other polluted sites. According to trophic diatom index (TDI) values, which were highly correlated with nutrients and EC, the study sites were classified into three classes: upstream and tributary (Class A and B), Wonju Stream (Class D), and mixed zone and downstream (Class C). A cluster analysis supported the result of TDI classification. Therefore, Wonju-stream located in populated urban area exerted the adverse ecological effects on the epilithic diatom community and water quality of the lower Seom River System, although its severity gradually decreased downstream.

• Korean Journal of Food Science and Technology
• /
• v.31 no.2
• /
• pp.410-415
• /
• 1999

Yakju was sterilized with high-voltage pulses of short time of a continuous pulsed electric field (PEF) system. The initial microbial counts of Yakju were $2.2{\times}10^{5}$ CFU/mL for total aerobes. The pH, acidity and electric conductivity of Yakju were 3.82, 0.37% and 1.24 mS/cm, respectively. Yakju was treated with exponential-wave formed electric pulses of 100 Hz for $0{\sim}4000{\mu}s$ under the field strength of $20{\sim}35\;kV/cm$. The lethal effect of electric fields on microorganisms was resulted from the breakdown of the cell membrane induced by the transmembrane electric potential. The critical values of the external field for the sterilization were 16.0 kV/cm for total aerobes. Logarithmic survival rates decreased linearly at low electric field strength, but curvilinearly at high electric field strength with treatment time. The sterilization of Yakju was more largely affected by the electric field strength than by the treatment time. Any changes in pH, acidity, and the growth of microorganisms were not found in the PEF treated Yakju during the storage at both $4^{\circ}C\;and\;30^{\circ}C$.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.38 no.3
• /
• pp.143-147
• /
• 2005

Relationship between structure and biological activity was performed using the five substance P-related peptides (SPRPs) [mammalian-SP (M-SP), cod-SP (C-SP), trout-SP (T-SP), lungfish-SP (L-SP) and Ranakinin] and four SP analogs [[$His^5$]-SP (5H-SP), [$Gly^5$]-SP (5G-SP), ($Ile^8$)-SP (8I-SP) and ($Trp^8$)-Ranakinin (8W-Ranakinin)]. The circular dichroism (CD) spectra showed that all of the peptides took an unordered structure in buffer solution and artificial liposomes. However, 8W-Ranakinin undergoes conformational changes by being transferred into neutral and acidic liposomes from an unordered structure to more ordered structure. The arterial relaxing effect of the peptides was also studied with guinea-pig aorta (GPA), As a result of the studies, L-SP was about 14-fold more potant than M-SP. The order of potency compared to $EC_{50}$ value was $L-SP{\gg}M-SP>5G-SP{\ge}8I-SP>5H-SP>T-SP$, C-SP, Ranakinin, 8W-Ranakinin.

• KSBB Journal
• /
• v.17 no.6
• /
• pp.571-576
• /
• 2002

Recombinant E. coli DH5 ${\alpha}$/pSB311 was made by cloning the genes encoding bacterial luciferase and aldehyde substrate proteins from Photohabdus luminescense, to complement defects of Lumistox, which is normally used in bioassays to monitor toxic substances in water environmental systems. The conditions for stable light production by the recombinant strains were investigated with respect to cell growth stage, cell number, and buffer conditions. The optimum growth stage was a middle-exponential stage with an OD$_{660nm}$ value of 0.6-0.7. ADout 10$^{6}$-10$^{7}$ cells per test tube was optimum for stable light emission. The effect of buffer was not significant if an optimum viable cell number was maintained. The bioluminescence of the recombinant E. coli harboring the lux operon of Photohabdus luminescense was not affected by temperature, while the bioluminescence of Lumistox was temperature sensitive. The recombinant E. coli was more sensitive to heavy metals (Cd, Cu, Hg, Zn) than Lumistox, because it does not require high concentrations of NaCl in the buffer.

• Korean Journal of Construction Engineering and Management
• /
• v.2 no.1 s.5
• /
• pp.68-77
• /
• 2001

MOCT(Ministry of Construction & Transportation) suggested 'A Plan for Implementation of Knowledge-based Economy for the Construction Industry' to add high value to the construction industry by means of knowledge-based management techniques. However, there are no guidelines which help the bodies of the construction industry(government, research center / university, enterprise, etc) with doing a knowledge management. So it is difficult to implement the knowledge management systems for the construction industry. To establish the knowledge portal for the construction industry, the objective of this study is to present works, which help the bodies of the construction Industry(government, research center/university, enterprise, etc) with doing knowledge activities efficiently. To accomplish this objective, we analyzed the overall knowledge management activities. And we suggested an implementing direction of the knowledge management systems for the construction industry and a strategy for implementing the knowledge management systems in the construction industry. As results of this study, we established a strategy of knowledge management and works of the bodies of the construction industry(government, research center / university, enterprise, etc) We expect that the results of this study will be used as a manual of the bodies of the construction industry for implementing knowledge management systems and the knowledge portal that brings the construction industry to high value added industry.

• Korean Journal of Construction Engineering and Management
• /
• v.10 no.3
• /
• pp.72-82
• /
• 2009

Lowering threshold value of construction services is extremely sensitive issue to the small and medium enterprises in construction industry. Because it means opening the construction markets where the small and medium construction companies compete intensely. Nevertheless, it is absent that the analysis on the effect of opening the market lowering threshold value of construction services under Government Procurement Agreements or Free Trade Agreement. This research is to analyze the effects of lowering threshold value of construction service which have been agenda repeatedly in the international agreements such as WTO and FTA. The current threshold value of construction services of Korea under WTO GPA are 5million SDR where the government delivers and 15million SDR where the local government or the public institution deliver. However major parties to an entente such as USA and EU have been demanding to lower threshold value of 15 million SDR where the local government or the public institution deliver to 5million SDR. The analysis figure the effect of this lowering threshold value to be a market reduction by 2trillion Won as '07 fiscal year basis. This market shrinkage will effect to the small and medium construction companies in local considerably.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.16 no.1
• /
• pp.13-25
• /
• 2000

Optimal Pressable Ceramic is one of the all-ceramic restorations with a shaded translucent pressed core and layering porcelains. The purpose of this study was to evaluate the marginal fidelity according to margin types and measurement sites, and to evaluate fracture strength according to margin types. Twenty seven OPC crowns made according to 3 types of cervical finishing lines were used in this study. Marginal gaps were measured before and after cementation. A Steromicroscope(SZ-ST(R), Olympus, Japan) was used to measure the space between the margin of OPC crown and the finishing line of metal model. Marginal gaps were measured at the labial, mesial, lingual and distal site, which were demonstrated in advance. Fracture strength testing was carried out using an Instron(Model M100EC, Mecmesin, England) at a cross head speed of 5 mm/min. All crowns were loaded until catastrophic failures occurred. The result were as follow: 1. In comparison according to variable margin before cementation, the marginal gap were increased in chamfer margin($47.50{\pm}18.39{\mu}m$), $120^{\circ}$shoulder margin ($55.21{\pm}14.4{\mu}m$) and $90^{\circ}$shoulder margin($71.18{\pm}13.30{\mu}m$) in ascending order, and there were significant differences between chamfer margin and $90^{\circ}$shoulder margin, $120^{\circ}$shoulder margin and between $120^{\circ}$shoulder margin and $90^{\circ}$shoulder margin respectively(p<0.05). 2. In comparison according to variable margin after cementation, the gap discrepancies were increased in chamfer margin($60.78{\pm}30.37{\mu}m$), $120^{\circ}$shoulder margin($66.67{\pm}11.18{\mu}m$) and $90^{\circ}$shoulder margin($85.78{\pm}17.23{\mu}m$) in ascending order, but there was significant difference only between chamfer margin and $90^{\circ}$shoulder margin(p<0.05). 3. Labio-lingual points showed a better marginal fidelity than that of proximal point(p<0.05). 4. Chamfer margin($48.76{\pm}8.45kgf$) showed higher fracture strength than $120^{\circ}$ shoulder margin($40.57{\pm}7.90kgf$) and $90^{\circ}$ shoulder margin(32.7.90kgf) (p<0.05), but there was significant difference only between chamfer margin and $90^{\circ}$ shoulder margin(p<0.05).

• Elastomers and Composites
• /
• v.48 no.2
• /
• pp.172-179
• /
• 2013

Impact modifier reinforced polymers are frequently used. In this study, Izod impact test has been simulated to analyze the mechanism of impact reinforcement of Nylon6 which contains impact modifier. The modeling of rubber particles added to Nylon6 as an impact modifier has been attempted. Based on the modeling, simulation of Izod impact test has been performed to observe the distribution and direction of stress at the cross-section of impact specimen. Three computer simulation models for Nylon6 were investigated. Those were without impact modifier, containing impact modifier without surface treatment, and containing impact modifier with surface treatment in the Nylon6. Simulation results showed that the stress which originated at the notch surface propergated to the inside of specimen round a impact modifier. In addition to that, impact modifier reinforced Nylon6 specimen showed low stress ditribution in the cross-section specially at notch surface. Principal stress in perpendicular direction to crack was also lowered in impact modifier reinforced Nylon6. These enhanced impact resistance reduced and crack propergations. Through this study it was realized that the computer simulation can be utilized to investigate the property enhacement of composite materials.

• Elastomers and Composites
• /
• v.48 no.2
• /
• pp.148-155
• /
• 2013

The crosslinking density of polymer can be quantitatively calculated by the Flory-Rehner equation using the swelling experimental data and the lattice constant ${\beta}_1$ of interaction parameter (${\chi}$) in this equation should be chosen have used cautiously. This ${\beta}_1$ is the experimental data by rule of thumb, and researchers have used little different values respectively. Generally, the average molecular weight between crosslink points $M_c$ in the Flory-Rehner equation and the Mooney-Rivlin equation have the same value, and ${\beta}_1$ can be calculated when the $M_c$ in the Flory-Rehner equation is given. Therefore, in this research, firstly we calculated the $M_c$ using the selected ${\beta}_1$ (=0.34) and the swelling experimental data of 1,2,3-triazole polymer from the Flory-Rehner equation, secondly the $M_c$ from the Mooney-Rivlin equation is calculated by the tensile experimental data, and finally two $M_c$ were compared. As a result, two $M_c$ values were almost the same, and it was proved that the ${\beta}_1$ (=0.34) was selected properly.