• The Journal of the Korea Contents Association
• /
• v.18 no.7
• /
• pp.28-37
• /
• 2018

It is necessary to produce and maintain interior lighting design reasonably and actively. Based on the lighting design applicable to interior design, the purpose of this study is to take into consideration the public design of public facilities installed in neighborhood parks and thereby to suggest a module-type variable interior lighting product design for reasonable use. To achieve that, relevant studies were reviewed to find the basic concepts of a module and the best cases of interior lighting applicable to interior design. To draw a new concept of the lighting design to which the concept of a module is applied, this study suggested the design direction for practical product development and a module-type design featuring easy process, product storage, assembly, and management, analyzed the reasonable maintenance direction for the development of lighting design, and proposed a case of design development applicable to the development of a new product design. Through cognitive strategy process, the design was made. This process, as a conceptual strategy, included the step of interior environment analysis, the step of lighting maintenance, the step of variable mechanism, and the step of emotional activation. These steps were connected with formative beauty of design so as to suggest a MLD(Module Lamp Design) strategy. In this way, this study tried to connect humans' free application for a space to a module product and to apply humans' visual approach and free conceptual value to MLD cognitive strategy design process for development.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.513-522
• /
• 2017

Rapid urbanization is being portrayed around the world au causing difficulty to manage public hygiene and maintain public order. Common problems often detected in urban areas including traffic congestion and the deterioration of the ecological environment are also being exacerbated. Despite all the effort being made by the government and local governments to manage urban facilities, urban residents are subjected to various levels of difficulty, due to the number of facilities to be managed exceeding the number of management personnel and the lack of an adequate management system. The aim of this study is to propose a management method using smart phones to improve the maintenance efficiency of urban facilities. First, the one-stop maintenance of urban facilities, including facilities information management, maintenance management and history management, is made possible by using smart phones to collect and transfer pictures and the locations of the urban facilities. Second, maintenance management is based on the location and picture information of the subject, not the location of the smart phones, which enables a prompt understanding of and actions to be taken for the facility. This method is especially effective as the smart phone application sends the facility status information directly to the maintenance personnel. Third, all of the information and figures relating to the facilities is managed using a database, resulting in the easy utilization of the history management and data. Fourth, all of the urban residents have access to this information via smart phone applications and, therefore, expanding the role of the facility maintenance personnel is made possible without any additional investment in infrastructure. Lastly, the location-based information enables the management of roads, trees and trails.

• Journal of Navigation and Port Research
• /
• v.29 no.6 s.102
• /
• pp.573-581
• /
• 2005

The outbound containers in a container terminal are classified into a few groups by their weights and stacked separately in a yard for easy and efficient handling. In order to maintain the balance of a ship during loading, containers of heavier weight groups should be fetched out of a yard and loaded onto the ship before those of lighter weight groups. However, the weight information used to determine the weight group is usually imprecise. Therefore stacks will actually be filled with mixture of different weight groups and rehandlings are unavoidable during loading operation. This paper presents a method for estimating the number of rehandlings caused by imprecise information and a scheme for generating a simple but efficient slot assignment rule. Experiments have shown that a rule generated by the proposed method can reduce the number of rehandlings by about $20\%$ compared to the traditional slot assignment method which stacks only the containers of the same weight group in a single stack.

• Nuclear Engineering and Technology
• /
• v.46 no.3
• /
• pp.439-446
• /
• 2014

An amphibious inspection robot system (hereafter AIROS) is being developed to visually inspect the in-containment refueling storage water tank (hereafter IRWST) strainer in APR1400 instead of a human diver. Four IRWST strainers are located in the IRWST, which is filled with boric acid water. Each strainer has 108 sub-assembly strainer fin modules that should be inspected with the VT-3 method according to Reg. guide 1.82 and the operation manual. AIROS has 6 thrusters for submarine voyage and 4 legs for walking on the top of the strainer. An inverse kinematic algorithm was implemented in the robot controller for exact walking on the top of the IRWST strainer. The IRWST strainer has several top cross braces that are extruded on the top of the strainer, which can be obstacles of walking on the strainer, to maintain the frame of the strainer. Therefore, a robot leg should arrive at the position beside the top cross brace. For this reason, we used an image processing technique to find the top cross brace in the sole camera image. The sole camera image is processed to find the existence of the top cross brace using the cross edge detection algorithm in real time. A 5-DOF robot arm that has multiple camera modules for simultaneous inspection of both sides can penetrate narrow gaps. For intuitive presentation of inspection results and for management of inspection data, inspection images are stored in the control PC with camera angles and positions to synthesize and merge the images. The synthesized images are then mapped in a 3D CAD model of the IRWST strainer with the location information. An IRWST strainer mock-up was fabricated to teach the robot arm scanning and gaiting. It is important to arrive at the designated position for inserting the robot arm into all of the gaps. Exact position control without anchor under the water is not easy. Therefore, we designed the multi leg robot for the role of anchoring and positioning. Quadruped robot design of installing sole cameras was a new approach for the exact and stable position control on the IRWST strainer, unlike a traditional robot for underwater facility inspection. The developed robot will be practically used to enhance the efficiency and reliability of the inspection of nuclear power plant components.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.18 no.4
• /
• pp.607-614
• /
• 1996

Nasal bone fracture is common in mid-facial trauma patients. In these patients, facial bone and nasal bone fracture are reducted at same time, but definite nasal reduction is difficulty in these patients because of nasotracheal intubation during general anesthesia and facial swelling in early facial trauma patients. If nasal packing and MMF are needed, there are difficult to maintain the reducted nasal bone because of some difficulty in airway maintenance after nasal packing and increasing the patient discomfort. So postoperative nasal deformity is more common in these combined patients. Secondary rhinoplasty is necessary in these patients who have deformed nasal bone, and there are many methods and materials for secondary rhinoplasty. But if primary nasal bone was reducted symmetrically, it is easy in secondary rhinoplasty. We present 7 cases of secondary rhinoplasty in mid-facial trauma patients who had combined nasal bone fracture. In these patients, primary nasal bone reduction carried with closed reduction method during primary facial bone reduction. About 6 months later, we performed secondary rhinoplasty with iliac bone and alloplastic materials. So we report these cases with literatures.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.391-398
• /
• 2005

The outbound containers in a container terminal are classified into a few groups by their weights and stocked separately in a yard for easy and efficient handling. In order to maintain the balance of a ship during loading, containers of heavier weight groups should be fetched out of a yard and loaded onto the ship before those of lighter weight groups. However, the weight information used to determine the weight group is usually imprecise. Therefore stacks will actually be filled with mixture of different weight groups and rehandlings are unavoidable during loading operation. This paper presents a method for estimating the number of rehandlings caused by imprecise information and a scheme for generating a simple but efficient slot assignment rule. Experiments have shown that a rule generated by the proposed method can reduce the number of rehandlings by about 20%compared to the traditional slot assignment method which stacks only the containers of the same weight group in a single stack.

• Journal of Environmental Science International
• /
• v.26 no.2
• /
• pp.231-238
• /
• 2017

Rapid industrial development has led to a serious problem of pollution in the industrial sector. With the increasing social need for environmental protection, research on air pollution prevention equipment for reducing pollutants in industrial processes is actively being undertaken. The deterioration of existent, installed facilities, their increased emission rates, and the strengthening of the effluent quality standards make complying with permissible emission standards difficult. In fact, installing new electric precipitators or complementing existent facilities is inevitable. The expansion and complementation of the installed electrical precipitators have led to improvements in dust collection efficiency, shorter working times, and lower costs. Because of its easy installation and simple manufacturing process, the production method with the discharge electrode of an electric precipitator is widely used. The following conclusions were reached by classifying discharge electrodes into four types based on the production method and mutually comparing them by their dust collection efficiency. None of the four types used in this study were damaged by impact. However, we were able to confirm some strain from the compression sites of both type A and type B. Both type B and type C are expected to have greater dust collection efficiencies than the other models due to their large vibration transmissibility. Moreover, the high vibrational energy is expected to cause rapping damage during its operation. Particularly, in the case of type B, some of the strain was found at the end of the compression site. The coupling schemes of both type C and type D are out of vibration transmissibility. On the other hand, the ability to maintain straightness and solidity of the side is regarded as outstanding and stable. Type D has outstanding on-site workability, considering the presence of locking, structural stability, and work conditions. From these experiments, we determined that type C is the most ideal connection method of discharge electrode, considering its construction period of renovation. Type C is inferior to type D with regard to on-site workability. However, type C has outstanding dedusting transmission with regard to the straightness, solidity maintenance, and vibration of shearing stress.

• Journal of the Korean Society of Fashion and Beauty
• /
• v.3 no.3 s.3
• /
• pp.31-40
• /
• 2005

The reason that aromatherapy began to draw attention again as the alternative therapy is because the essential oils that are used for aromatherapy not only allow the human body to maintain homeostasis but also have an effect on curing a mental feeling of fatigue and because these efficacies and effects are proceeding with being proved scientifically. Also, with coming to be high in a voice of concern about severally side effects that the modern medicine and the synthetic chemistry have, the aromatherapy came to be paid attention as the replacement therapy that can substitute for and supplement this. In particular, at the time of requiring a study on a substance to substitute for this after having been announced in Japan for 1998 a risk of Zincpyrithione that is being used as a component of dandruff treatment, it is thought that the aroma oil that was known for having an anti-dandruff effect has a merit of being easy in a user's access, thus it will be effective in curing the symptom of dandruff. Accordingly, this study conducted the following experiment in a bid to examine whether the aroma oil has the anti-microbial effect on the actual malassezia. First of all, it measured the minimum concentration of aroma oil in which the growth of malassezia is inhibited, by carrying out MIC(Minimum Inhibition Concentration) test in terms of anti-microbial activity against Malassezia furfur KCTC 7744 while using oils of Patchouli, Rosemary, Lavender, and Tea tree among aroma oils that are being used for dandruff treatment. As a result of that, Tea tree oil has the most excellent anti-microbial activity, and the measurement result of anti-microbial activity was shown in order of Lavender oil>Rosemary oil>Patchouli oil. Next, it carried out the is actually eased by applying Tea tree oil directly to the scalp of dandruff. In consequence of the experiment, the massage of Tea tree oil indicated the result of relieving the symptoms of dandruff such as scale, itch, pain, inflammation, and sebum, and among these symptoms of dandruff, it was shown to be most effective in easing itch. Especially, this clinical experiment was indicated that the massage of Tea tree oil has the most effect on relieving itch of targets with a dry-skin type who had no experience of dandruff treatment.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.7
• /
• pp.135-142
• /
• 2015

Human-powered self-generating devices have been attractive with its operation characteristic independent from outer environment such as weather condition and wind speed. However, conventional self-generators have low electric power output due to their weakly-coupled electromagnetic structure. More importantly, rotary crank motion which is usually adopted by conventional self-generator to generate electricity requires specific skeletal muscles to maintain large torque circular motion and consequently, causes fatigue on those muscles before it can generate enough amount of electricity for any practical application. Without improvement in electric power output and usability, the human-powered self-generator could not be used in everyday life. This study aims to develop a human-powered self-generator which realized a strong electromagnetic coupling in a closed-loop tubular structure (hula-hoop shape) for easy and steady long-term driving as well as larger electric output. The performance and usability of the developed human-powered generator is verified through experimental comparison with a commercial one. Additionally, human workload which is a key element of a human-powered generator but not often considered elsewhere, is estimated based on metabolic energy expenditure measured respiratory gas analyzer. Further study will focus on output and portability enhancement, which can contribute to the continuous power supply of mobile equipments.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.10
• /
• pp.127-136
• /
• 2007

It is easy to install and maintain a mobile multi-hop wireless network due to its self-organizing characteristics. However it has security weakness of the authentication of mobile multi-hop relay stations. Specially, the mobile multi-hop relay network in the IEEE 802.16j has the additional security weakness caused by the requirement of backward compatibility for mobile stations of the conventional IEEE 802.16 system. In this paper, we propose a novel mutual authentication scheme applicable to IEEE 802.16j-based mobile multi-hop relay network architecture. The scheme is able to resolve the initial trust gain problem of a multi-hop node at its entry to the network, the problem of rogue mobile multi-hop node and the problem of hop-by-hop authentication between multi-hop nodes. Effectively, the scheme is a hybrid scheme of the distributed authentication method and the centralized authentication method which have been considered to be deployed in the wireless ad-hoc network and the wireless network connected to wired authentication servers, respectively. Also, we analyze the effectiveness of the proposed hybrid authentication method.