• Journal of architectural history
• /
• v.14 no.1 s.41
• /
• pp.151-183
• /
• 2005

All architecture in the history were based on a certain concept of architectural unit that functioned as a base model of architectural design. As we know, such model was not the same in the East and the West, and therefore, their architectures are not the same. This paper aims to identify how and why such base model of the two cultural area are different. As one way of discussing this issue, the concept of particle and field, as two representative idea of the West and East respectively, the employed. This kind of discussion can not follow the way of scientific verification as method of argument. However, the understanding of such concept of unit model is crucial for the understanding of the architecture of the culture in general. In basic sense, the tradition of Western architecture is rooted in the model of particle, where, architecture is conceived to be as a independent unit standing on earth as if it is a box like object. While, the tradition of Eastern architecture is rooted in the model field, where, architecture is conceived to be a part of field organization. In present days, we are used to the model of particle as if it is the only possible model of architecture. But, in fact, what man need to achieve in their architecture and city, is the balance between the two models.

• 한국석유지질학회:학술대회논문집
• /
• autumn
• /
• pp.47-56
• /
• 2000

The northwestern part of Kyongsang Basin largely comprises interbedded sandstone and mudstone with local conglomeratic deposits in the basin margin, representing marginal alluvial fans and fluvial depositional environments. The non-marine successions are divided into successive stratigraphic units, each of which is unique in facies assemblages and architecture of sandstone bodies. Two stratigraphic units, i.e., Sinpyong-Anpyong and Jotap units are examined in terms of stratigraphic architecture and its causative processes. Detailed architectural analysis reveals that the channel systems of Sinpyong-Anyong unit were of braided patterns, whereas those of Jotap unit were dominated by small-scale bedforms. The difference in fluvial styles can be attributed to the changes in amount and caliber of sediment load and water discharge, which might have been ultimately governed by basin tectonics, climate, and base level. Along with the marked change in fluvial style, the two successive units show repeated expansions of distal, water-logged floodplains and lacustrine facies in the basal and uppermost parts of Sinpyong-Anpyong unit, where the proportion of channel sandstone bodies is relatively low. These stratigraphic intervals are succeeded by the sequences with proximal, well-drained floodplain facies and relatively coarser-grained channel sandstone bodies of higher proportion, reflecting the progradation of proximal systems (the middle part of Sinpyong-Anpyong unit and Jotap unit). The overall stratigraphic architecture can be ascribed to the fluctuations in accommodation space and sediment supply induced by repeated basin subsidence.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.2
• /
• pp.719-722
• /
• 2016

Background: Cholangiocarcinoma (CCA) is a serious health problem in Thailand, particularly in northeastern and northern regions, but epidemiological studies are scarce and the spatial distribution of CCA remains to be determined. A database for the population at risk is required for monitoring, surveillance and organization of home health care. This study aim was to geo-visually display the distribution of CCA in northeast Thailand, using a geographic information system and Google Earth. Materials and Methods: A cross-sectional survey was carried out in 9 sub-districts and 133 villages in Chum Phuang district, Nakhon Ratchasima province during June and October 2015. Data on demography, and the population at risk for CCA were combined with the points of villages, sub-district boundaries, district boundaries, and points of hospitals in districts, then fed into a geographical information system. After the conversion, all of the data were imported into Google Earth for geo-visualization. Results: A total of 11,960 from 83,096 population were included in this study. Females and male were 52.5%, and 47.8%, the age group 41-50 years old 33.3%. Individual risk for CCA was identifed and classified by using the Korat CCA verbal screening test as low (92.8%), followed by high risk (6.74%), and no (0.49%), respectively. Gender ($X^2$-test=1143.63, p-value= 0.001), age group ($X^2$-test==211.36, p-value=0.0001), and sub-district ($X^2$-test=1471.858, p-value=0.0001) were significantly associated with CCA risk. Spatial distribution of the population at risk for CCA in Chum Phuang district was viewed with Google Earth. Geo-visual display followed Layer 1: District, Layer 2: Sub-district, Layer 3: Number of low risk in village, Layer 4: Number of high risk in village, and Layer 5: Hospital in Chum Phuang District and their related catchment areas. Conclusions: We present the first risk geo-visual display of CCA in this rural community, which is important for spatial targeting of control efforts. Risk appears to be strongly associated with gender, age group, and sub-district. Therefor, spatial distribution is suitable for the use in the further monitoring, surveillance, and home health care for CCA.

• Economic and Environmental Geology
• /
• v.53 no.1
• /
• pp.71-85
• /
• 2020

To understand behavior of fault cores in the field of geotechnical and geological engineering, we present an investigation of the physical properties (breccia and clay contents, unit weight, porosity, and water content) and friction characteristics (internal friction angle and cohesion) of fault cores, in granitic, sedimentary, and volcanic rocks in South Korea. The breccia contents in the fault cores are positively correlated with unit weight and negatively correlated with clay content, porosity, and water content. The inter-quartile ranges of internal friction angles and cohesion calculated from direct shear tests are 16.7-38.1° and 2.5-25.3 kPa, respectively. The influence of physical properties on the friction characteristics of the fault cores was analyzed and showed that in all three rock types the internal friction angles are positively correlated with breccia content and unit weight, and negatively correlated with clay content, porosity, and water content. In contrast, the cohesions of the fault cores are negatively correlated with breccia content and unit weight, and positively correlated with clay content, porosity, and water content.

• Journal of the Korean Geosynthetics Society
• /
• v.14 no.1
• /
• pp.33-41
• /
• 2015

In this study, laboratory tests (flow, unit weight, unconfined compressive strength and bleeding tests) were performed to evaluate engineering properties of treated soil to improve pipe mixing method. As result, flow and bleeding properties are proportional to the water contents. The unit weight and unconfined compressive strength is decreased as the water contents increased. Comparing equipments contact pressure with bearing capacity of the mixed soil for dozer, backhoe and belt conveyor are immediately appliable. The applicable water content range is estimated from 80% to 200% by pipe mixing method using cement. Also, The design chart is developed from the results.

• Aerospace Engineering and Technology
• /
• v.12 no.2
• /
• pp.14-23
• /
• 2013

Fault management design of the satellite describes preparations for failures which can occur during operational phase. Fault management design contains detection and isolation function of anomaly, and also it contains function to maintain the satellite in safe condition until the ground station finds out a cause of failure and takes a countermeasure. Unlike normal operation, safing operation is automatically performed by Power Control and Distribution Unit and Integrated Bus Management Unit which loads Flight Software without intervention of ground station. Since fault management operation is automatical, fault management logic and functionality of relevant hardware should be thoroughly checked during ground test phase, and error which is similar to actual should be carefully applied without damage. Verification test for fault management design is conducted for various subsystems of satellite. In this paper, we show the design process of fault management design verification test for Electrical Power Subsystem and Attitude and Orbit Control Subsystem of Low Earth Orbit satellite flight model and the test results.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.2
• /
• pp.360-364
• /
• 2016

The rare earth output is concentrated in limited number of countries including China. Also the necessity for development of non-rare earth motor is getting signified due to the rapid increase of rare earth price and resource weaponizing policies. Non-rare earth motor is generally designed as spoke type PMSM (Permanent Magnet Synchronous Motor) in order to maximize the power density. Such spoke type PMSM has advantage in concentrating the flux but demonstrates lower efficiency compared to permanent magnet using Nd (Neodymium) permanent magnet. Therefore, applications with strong necessity for efficiency need rotor structure having improved efficiency compared to spoke type PMSM. Hence, this study suggested fan-shape type PMSM with somewhat lower power density but maximized efficiency. Fan-shape type PMSM is a rotor shape demonstrating outstanding reduction of iron loss compared to existing spoke type. Thus, this study analyzed the improvement of efficiency and reduction of loss arising from the suggested shape through parameter calculation.

• Nuclear Engineering and Technology
• /
• v.53 no.12
• /
• pp.4106-4113
• /
• 2021

Rare earth doped barium tellurite glasses were synthesised and explored for their radiation shielding applications. All the samples showed good thermal stability with values varying between 101 ℃ and 135 ℃ based on dopants. Structural properties showed the dominance of matrix elements compared to rare earth dopants in forming the bridging and non-bridging atoms in the network. Bandgap values varied between 3.30 and 4.05 eV which was found to be monotonic with respective rare earth dopants indicating their modification effect in the network. Various radiation shielding parameters like linear attenuation coefficient, mean free path and half value layer were calculated and each showed the effect of doping. For all samples, LAC values decreased with increase in energy and is attributed to photoelectric mechanism. Thulium doped glasses showed the highest value of 1.18 cm^-1 at 0.245 MeV for 2 mol.% doping, which decreased in the order of erbium, holmium and the base barium tellurite glass, while half value layer and mean free paths showed an opposite trend with least value for 2 mol.% thulium indicating that thulium doped samples are better attenuators compared to undoped and other rare earth doped samples. Studies indicate an increased level of thulium doping in barium tellurite glasses can lead to efficient shielding materials for high energy radiation.

• ALGAE
• /
• v.36 no.4
• /
• pp.299-314
• /
• 2021

Some species in the dinoflagellate genus Alexandrium are bioluminescent. Of the 33 formally described Alexandrium species, the bioluminescence capability of only nine species have been tested, and eight have been reported to be bioluminescent. The present study investigated the bioluminescence capability of seven Alexandrium species that had not been tested. Alexandrium mediterraneum, A. pohangense, and A. tamutum were bioluminescent, but A. andersonii, A. hiranoi, A. insuetum, and A. pseudogonyaulax were not. We also measured the bioluminescent intensity of A. affine, A. fraterculus, A. mediterraneum, A. ostenfeldii, A. pacificum, A. pohangense, A. tamarense, and A. tamutum. The mean 200-second-integrated bioluminescence intensity per cell ranged from 0.02 to 32.2 × 10⁴ relative luminescence unit per cell (RLU cell^-1), and the mean maximum bioluminescence intensity per cell per second (BL_Max) ranged from 0.01 to 10.3 × 10⁴ RLU cell^-1 s^-1. BL_Max was significantly correlated with the maximum growth rates of Alexandrium species, except for A. tamarense. A phylogenetic tree based on large subunit ribosomal DNA (LSU rDNA) showed that the bioluminescent species A. affine, A. catenella, A. fraterculus, A. mediterraneum, A. pacificum, and A. tamarense formed a large clade. However, the toxicity or mixotrophic capability of these species was split. Thus, their bioluminescence capability in this clade was more consistent than their toxicity or mixotrophic capability. Phylogenetic trees based on LSU rDNA and the luciferase gene of Alexandrium were consistent except for A. pohangense. The results of the present study can provide a basis for understanding the interspecific diversity in bioluminescence of Alexandrium.

• Journal of the Korean Geophysical Society
• /
• v.2 no.4
• /
• pp.251-258
• /
• 1999

A high-resolution seismic survey was conducted on the abandoned tidal flat in Shihwa Lake on the west coast of Korea. A portable vibrator was used as a seismic source and 217 shot gathers with 48-channel system were acquired. F-k filtering, residual static corrections and post-stack frequency filtering are found to be useful for signal enhancement. The overburden is divided into two seismic depositional units. Unit I is deposited in tidal environment characterized by parallel and high continuity reflection pattern. This unit comprises a dry layer (Unit Ia) and a wet layer (Unit Ib) having averagely 5 and 15 meters thick, respectively. Unit II unconformably overlain by Unit I exhibits discontinuity and hummocky reflection pattern, indicating complex channel-fill sediments in estuary. The maximum thickness of this unit is approximately 20 meter. Acoustic basement is considered as Precambrian granitic gneiss occurred in the surrounding area.