• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.10
• /
• pp.1001-1007
• /
• 2013

In the case of multi-mission LEO(Low Earth Orbit) operations, depending on the orbit of each satellite, one ground site is supposed to be communicated with more than two satellites at the same time. On top of that, image data processing system is generally mission-specific and 1:1 backup configuration. For the reason, if ground site has smaller number of antenna than that of satellite, interface with image data processing system would be very complicated. In this paper, considering that two LEO satellites can be operating and image data recording unit in redundancy can be easily plug-in, the implementation of matrix receiving structure is described. This matrix receiving structure has been validated from KOMPSAT-2 and -3(KOrea Multi-Purpose SATellite-2 and -3) since KOMPSAT-3 was launched in May, 2012. This structure will be applied for the KOMPSAT-3A and -5 through its expandability.

• Geotechnical Engineering
• /
• v.8 no.3
• /
• pp.23-36
• /
• 1992

The flat dilatometer(DMT) has been practically used as an in-situ test equipment. It is a simple, rapid and cost-effective tool to characterize the in-situ stress-strain-strength properties of various types of ground materials. However, the results of flat DMT should be validated with considerable data with respect to the known reference values for a specific site. In this study, the applicability of existing relationships which were established for other local deposits is verified by performing the tests in several clay deposits. To compare with the DMT results, field vane tests and cone penetration tests were also carried out in the same field as reference tests, and unconsolidated undrained tests, oedometer tests, and other fundamental material properties tests were conducted on the thin-walled tube samples in the laboratory. The results of the flat DMT combined with empirical correlations are used to estimate soil types, unit weights, coefficients of lateral earth pressure at rest, overconsolidation ratios, constrained moduli and undrained shear strengths of three clay local deposits. It was found that various geotechnical properties estimated from the flat DMT generally well agree with those from the reference tests.

• KIEAE Journal
• /
• v.10 no.5
• /
• pp.165-170
• /
• 2010

Super high-rise mixed use buildings require a longer period for construction. Especially finishing work takes up about 40% of the whole construction period. Thus, finishing work is becoming an important factor in determining the construction period along with earth work and frame work. As the expected returns added by the reduction of the period and cost in constructing super high-rise mixed use buildings are huge, the expectations are now increasing for the possible gains. In this respect, as the period of finishing work is easier to be shortened than that of frame work, the efforts to acquire the technical knowledge to reduce the finishing work period are now being required. Accordingly, in this study, we aimed at suggesting the basic data for designing an economic plan for finishing-work procedure by analyzing the productivity of each work type of finishing work procedure on the basis of the execution and results of a construction method as a time-flexible finishing work plan. For this, we categorized the work types of finishing work procedure into each work unit and provided a work-system for each of them. Also, with case studies, we calculated the detailed amounts of the work-loads, required materials, productivity, and productivity index of the main work types of finishing work procedure and each of their separate work units as well as analyzed the relationship between the value results to suggest a better way to improve its productivity.

• The Korean Journal of Quaternary Research
• /
• v.23 no.1
• /
• pp.1-24
• /
• 2009

Paleosol layers lying on top of the terrace in Jeongdongjin area appear to have been deposited under generally well-drained condition with periodic waterlogging. From a 4.5m-long profile observed, a total of 6 stratigraphic units were identified. Grain-size analysis indicates the dominance of silty and clay materials with some portions with high sand content. Major mineralogical elements are quartz, feldspar, mica and chlorite. Geo-chemical composition shows little change throughout the stratigraphy with some fluctuation in chemical weathering index. Marked increase in magnetic susceptibility is recognizable where stratigraphic unit changes. Soil- wedge layer is developed around 50cm below the surface with concentration of grains of AT tephra (c. 25,000 BP). An OSL date of c. 110,000 BP was obtained from a sand layer lying below the paleosol.

• The Journal of Engineering Geology
• /
• v.16 no.2 s.48
• /
• pp.161-169
• /
• 2006

A short seismic reflection survey was performed to map the basement and the upper units in the Gomso Bay. This research was mainly aimed at clarifying the basement by improving the signal-to-noise ratio in data processing steps. The strategies employed in this research included enhancement of the signal interfered with large-amplitude noise, through pre- and post-stack processing such as time-variant filtering, bad trace edit, careful muting after f-k filter and NMO correction. The subsurface structure mapped from this survey mainly consists of the top of basement and the upper three units, which were well correlated to the result from the previously conducted MT survey. Furthermore seismic section clarifies approximately 30m deep subhorizontal event of the top of the basement, which was not shown in the central portion of the MT section due to data qualify.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.15 no.1
• /
• pp.2853-2877
• /
• 1973

Models of cross-sections and channels were made in order to measure seepage losses. Cross-sections were made of sand, sandy clay loam and loam, their thicknesses being 30cm and 40cm, respectively. Flow depths kept in the cross-sections were 4cm, 6cm, 8cm and 10cm. Straight and curved channel models were provided so as to measure seepage losses, when constant water depths maintained at the heads of the channels were 7.3cm and 5.7cm, respectively. The results obtained in this experiment are presented as follows: 1) A cumulative seepage loss per unit length at a point in the channel varies in accordance with time and flow depth. The general equation of cumulative seepage loss may be as follows(Ref. to Table V.25): $$q_{cum}=\int_{o}^aq(a)dt+\int_a^bq(b)dt+\int_b^tq(c)dt$$ 2) In case that the variation of water depth through the channel is slight, the total seepage loss may be computed by applying the following general equation: $$\={q}_{cum}{\cdot}x=\int_o^tq_{cum}\frac{{\partial}x}{{\partial}t}dt$$ 3) Because seepage loss varies considerably according to water depth in case that the variation of flow depth through the channel is great, seepage loss should be computed by taking account of the change of flow depth. 4) The relation between time and traveling distance of water flow may be presented as the following general equation(Ref. to Table V.29): $$x=pt^r$$ 5) The ratios of the seepage losses of the straight channel to the curved channel are 1:1.03 for a flow depth of 7.3cm and 1:1.068 for that of 5.7cm. 6) The ratios of the seepage losses occurring through the bottom to those through the inclined plane in the channel cross-section are 1:2.24 for a water depth of 8cm and 1:2.47 for a depth of 10cm in case that soil-layer is 30cm in thickness. Similarly, those ratios are 1:2.62 and 1:2.93 in case of a soil-layer thickness of 40cm(Ref. to Table V.5).

• Journal of the Korean Society of Safety
• /
• v.26 no.4
• /
• pp.34-40
• /
• 2011

This paper is purposed to develop an leakage current detecting system(LCDS) which can prevent electrical fires on breaker capacity expansion as well as ruptures of XL(Extra long) pipelines and power failure by operation of ELB(Earth leakage breaker) at auto water machine in winter. In order to develop LCDS, this paper studied field state investigation, field state experiment, development of leakage alarm system and verification experiments. Field states investigation at livestock companies(10 companies) in cheong-won location to deduce the problems of auto water machine is analyzed. The field state experiment is conducted at B livestock company in cheong won location. The field state experiment method is measured with leakage current when ELB tripped by environment factor(fine, cloudy, and rainy day). The LCDS is developed as MCU(Micro Control Unit) part applied leakage current values at B livestock company. Verification experiments for the leakage current detecting system were conducted by two methods of current supply and field test. Results show that LCDS suggested in this paper are valuable and usable in auto water machine based on environment factor, which will prevent severe damage to human beings and properties and reduce the electrical fires in livestock.

• Journal of the Korean institute of surface engineering
• /
• v.47 no.6
• /
• pp.316-322
• /
• 2014

With increase in demand for higher operating temperatures of gas turbines, extensive research efforts have been carried out to enhance the performance of thermal barrier coatings (TBCs) in the field of coating processing as well as materials. In this study, thermal barrier coatings in lanthanum/gadolinium zirconate system, which is one of the most promising candidates for replacing yttira-stabilized zirconia (YSZ) in thermal barrier coating applications, are fabricated via suspension plasma spray. Dense, $300{\sim}400{\mu}m$ thick coatings of fluoritephase zirconate with modest amount of segmented microstructures are obtained by using suspension plasma spray with suspensions of planetary-milled mixture between lanthanum and/or gadolinium oxide and nano zirconia. These coatings exhibit thermal conductivities of 1.6 ~ 1.7 W/mK at $1000^{\circ}C$, which is relatively lower than that of YSZ.

• Journal of The Geomorphological Association of Korea
• /
• v.24 no.3
• /
• pp.83-103
• /
• 2017

Sand deposit with shell units is exposed in Hasa-ri, Yeonggwang-gun, Jeonnam province. We investigated the characteristics of sand sediment topography in the Yeonggwang coastal area to collect evidence of the paleo-environmental change. We performed analysis on particle characteristics, chemical composition, and the age of deposition of sediments. The deposit comprise moderately well sorted medium and fine sand ($1.00{\sim}2.19{\varphi}$). Various sedimentary structures can be observed. Geochemical characteristics change by depth and the degree of variation with depth is small. The results obtained from OSL dating show that sand layers below shell units are deposited 0.32-0.43 ka. As the elevation of the shell unit far mean high water levels or highest high water level, the extensive shell layers could only have been deposited during storm surge conditions. Aeolian processes are discounted due to the size of clasts and the location at which they occur. Results of age dating of the surrounding deposits indicate shell deposits formed after around 300 years age. There is a distinct difference between sedimentary layers including dark brown-black layer. The sedimentary characters such as particle size and geochemistry show difference with depth. It is presumed that depositional environmental in Hasa-ri has changed several times before. This study is expected to contribute to finding an evidence about occurrence of storm surges.

• Hwankyungkyoyuk
• /
• v.13 no.1
• /
• pp.75-86
• /
• 2000

The purpose of this study is to analyze the content of environmental inquiry activities and values of elementary school students written in their reports of the Energy Environment Inquiry Activity Contest which is a unit contest of the Youth Science Festival held annually in Korea and get some ideas for the valuable way of Korean environmental education. 10 teams' reports were gathered and the locality, class study area, inquiry theme, inquiry method and values were analyzed and introduced as case studies to get some insights to teach elementary school students environmental values through inquiry activities of science subject approach. Each teams set various inquiry themes in the content domain of energy resources and earth environment conservation focusing on each team's geographical characteristics and occurring environmental problems in their local areas. There were 16 sentences representing technocentrism and 12 sentences representing ecocentrism. 5 of 10 teams showed both of technocentrism and ecocentrism in their reports. But their was only scientific knowledge without any environmental values in one team's report. Inquiry activity is a good teaching-learning method to develop environmental literacy. There should be environmental values involved as far as it is the environmental inquiry activities using environmental subject matter. The result of this study proposes that environmental educators should actively intervene for inquirers to set a stage in the whole process to search for an alternative to solve environmental problems involved in their project activities. The reason is because the environmental education in the elementary school is established to operate by the infusion way into various subjects already existed in the Korean curriculum.