• 제목/요약/키워드: Earth resistivity

검색결과 468건 처리시간 0.024초

제방누수조사에의 물리탐사기법의 활용(쌍극자배열 전기비저항탐사와 SP탐사를 중심으로) (Application of Geophysical Exploration Methods to Seepage Bone Investigation of Dam Structures)

  • 원종근;송성호
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 1999년도 제2회 학술발표회
    • /
    • pp.240-257
    • /
    • 1999
  • 우리나라의 저수지 총수 18,032 개소의 $16\%$에 달하는 저수지가 누수를 겪고 있다. 이러한 불안전 시설물 조사에 있어서 물리탐사기법의 활용은 경제적 측면에서 지극히 자연스러운 흐름이다. 본 연구에서는 전기비저항탐사에 의해 이미 조사된 자료들을 분석하여 현장측정값의 모형을 보여주고 저수지에서의 누수조사 현장경험을 기술하였으며 토질과 전기비저항값의 상관관계를 분석하여 모래함량과의 연관성을 얻었다. 또한 SP탐사기법은 방조제뿐만 아니라 저수지 누수 조사에서도 효과가 있는 것으로 분석되었다.

  • PDF

전기비저항과 암반분류의 상관관계에 대한 고찰 (A Study on the Correlation Between Electrical Resistivity and Rock Classification)

  • 권형석;황세호;백환조;김기석
    • 지구물리와물리탐사
    • /
    • 제11권4호
    • /
    • pp.350-360
    • /
    • 2008
  • 전기비저항은 땅의 여러 물리적 특성 중의 하나로 전기비저항 탐사, 전기비저항 검층과 실내시험 등을 통해 측정된다. 최근에 전기비저항은 도로나 철도터널의 지보형식 설계에서 미시추구간의 암반등급을 예측하는데 활용되는 등 그 활용도가 증가하고 있다. 전기비저항으로부터 신뢰할 수 있는 암반등급을 추정하기 위해서는 많은 현장시험과 함께 전기 비저항과 암반분류의 상관성에 대한 고찰이 요구된다. 본 연구에서는 먼저 암석시료에 대해 탄성파속도, 탄성계수, 일축 압축강도 등의 암석물성시험과 전기비저항 코어시험을 실시하였다. 시험결과로부터 획득된 전기비저항과 암석물성의 상관성을 분석한 결과 전기비저항이 암석물성과 높은 상관성을 가지고 있음을 확인하였다. 다음으로 일반적인 지반조사에 비해 현저히 많은 12개의 시추공에서 전기비저항 검층을 실시하여, 전기비저항 탐사 및 전기비저항 검층에 의한 전기비저항과 RMR의 상관성을 고찰하였다. 전기비저항 검층은 RMR과 80% 이상의 매우 높은 상관성을 보여 전기비저항을 이용하여 암반등급을 결정하는 방법이 과학적으로 타당하다는 것을 확인하였다. 이에 반해 전기비저항 탐사는 RMR과 20% 내외의 낮은 상관성을 가지는데 이는 단층파쇄대와 같은 저비저항 이상대가 역산에 영향을 미치기 때문으로 상관관계 분석시 신선한 암반, 절리파쇄대, 단층파쇄대로 그룹을 분리하여 상관성을 분석하면 신뢰성 있는 상관식을 도출할 수 있음을 확인하였다.

Application of resistivity monitoring to examine the grouting effect

  • Farooq, Muhammad;Park, Sam-Gyu;Kim, Jung-Ho;Song, Young-Soo
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2006년도 공동학술대회 논문집
    • /
    • pp.79-82
    • /
    • 2006
  • This paper presents to examine the ability of an electrical resistivity method to monitor the grouting effect at subsidence area. To monitor the changes in ground resistivity before and during the grout, series of electrical resistivity monitoring surveys have been conducted. Data has acquired in the form of grid making nine lines parallel to road and four lines traverse the road. Two kinds of electrode arrays modify pole-pole and dipole-dipole arrays were used during resistivity data acquisition. In this paper, the results show that electrical prospecting is an effective method to detect low resistivity imaging zone by grout during the ground reinforcement.

  • PDF

지구통계학적 방식에 의한 물리탐사 자료의 복합해석과 그 응용 (Integrated Interpretation of Geophysical Data and its Application by Geostatistical Approach)

  • 오석훈;정호준;서백수
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2007년도 공동학술대회 논문집
    • /
    • pp.48-53
    • /
    • 2007
  • A new way to integrate various geophysical information for evaluation of RQD was developed. In this study, we did not directly define the RQD value where borehole data are not sampled. Instead, we infer the probability of RQD values with prior probability from borehole direct data, and secondary supporting probability from resistivity and seismic tomography data. For the integration, we applied the geostatstical indicator kriging to get prior probability of RQD value, and indicator kriging with soft data to get the supporting probability from resistivity and seismic data. And we finally use the permanence ratio rule to integrate these information. The finally obtained result was also analyzed to fully utilize the probabilistic features. We show the probability of wrongly classifying the RQD evaluation and vice versa. This result may be used for decision making process based on the geophysical exploration.

  • PDF

Resistivity and Calibration Error Estimations for Small-Loop Electromagnetic Method

  • Sasaki, Yutaka;Son, Jeong-Sul;Kim, Chang-Ryol;Kim, Jung-Ho
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2007년도 공동학술대회 논문집
    • /
    • pp.167-172
    • /
    • 2007
  • The frequency-domain small-loop electromagnetic (EM) instruments are increasingly used for shallow environmental and geotechnical surveys because of their portability and speed. However, it is well known that the data quality is generally so poor that quantitative interpretation of the data is not justified in many cases. We present an inversion method that allows the correction for the calibration errors and also constructs multidimensional resistivity models. The key point in this method is that the data are collected at least at two different heights. The forward modeling used in the inversion is based on an efficient 3-D finite-difference method, and its solution was checked against 2-D finite-element solution. The synthetic and real data examples demonstrate that the joint inversion recovers reliable resistivity models from multi-frequency data severely contaminated by the calibration errors.

  • PDF

수직 다층구조의 대지저항률 영상복원을 위한 전극배열법의 비교 (Comparison of electrode arrays for earth resistivity image reconstruction of vertical multi layers)

  • 부창진;김호찬;강민제
    • 전기전자학회논문지
    • /
    • 제22권1호
    • /
    • pp.149-155
    • /
    • 2018
  • 본 논문에서는 전기영상법(ET)을 이용하여 수직 다층구조 대지저항률을 영상복원 하였다. 일반적으로 접지 시공을 위한 대지 분석은 수평 다층 구조라는 가정 하에 행해지지만, 현실적으로는 지하구조가 수직 구조일 경우도 발생하게 된다. 여기에서는 수직 다층구조의 대지분석에 유리한 전극배열법을 찾아내기 위하여 전기영상법에 가장 널리 사용되는 Wenner, Schlumberger 그리고 쌍극자배열을 테스트하였다. ET영상복원에는 Gauss-Newton 역산 알고리즘이 이용되었다. RMS 오차 분석결과를 보면 Wenner 배열의 경우가 RMS 오차가 가장 적게 나타나는 것을 확인할 수 있었다.

농약살포시스템 이동을 위한 기구물 설치를 위한 대지 분석방법 (Earth Analysis Method for Installation of Equipment for Moving Pesticide Spraying System)

  • 부창진
    • 전기전자학회논문지
    • /
    • 제22권4호
    • /
    • pp.1152-1157
    • /
    • 2018
  • 논문에서는 밭농사에 적합하도록 설계된 와이어 기반 농약살포장비의 이동을 위한 구조물 설치 위치의 어려움을 해결하고자 한다. 이를 위해 간접적으로 대지구조를 파악할 수 있는 대지저항률 측정방법과 분석기술을 적용한다. 선정된 밭농사 지역에 일정 간격의 전극을 현장에 설치하고 내장형 제어보드에 다수의 스위치를 구동시켜 대지저항률 데이터를 자동 취득한다. 그리고 2차원 영상복원 알고리즘을 사용하여 대지분석을 수행하고 그 결과를 통해 실제 구조물 타설에 적합한 최적지점을 선정하고자 한다.

$CO_2$ 지중저장에 의한 전기비저항 모니터링 및 포화도 예측을 위한 실험 연구 (Experimental Study on Estimation of $CO_2$ Saturation by the Electrical Resistivity Monitoring during $CO_2$ Injection for Rock Samples)

  • 김종욱;송영수
    • 지구물리와물리탐사
    • /
    • 제13권4호
    • /
    • pp.388-396
    • /
    • 2010
  • 이 논문은 전기비저항 관측을 이용한 이산화탄소($CO_2$)의 지중저장 모니터링 및 포화도 산정에 관한 실험 연구로, 균질한 시료 및 불균질한 시료에 대해 초임계$CO_2$와 염수의 주입 및 반복 실험을 통하여 전기비저항의 변화를 고찰하고 이로부터 전기비저항 지수를 이용하여 $CO_2$ 포화도를 추정하였다. 두 암석시료에 대해 실험한 결과, 시료 내부의 공극구조에 따른 영향과 함유된 점토 광물의 영향이 포화도 산출하는데 있어서 영향을 미치고 있음을 확인하였다. 이러한 결과는 실제 저류층에서의 전기비저항에 따른 $CO_2$ 포화도 추정의 정량적 평가에 있어 유용한 기초 자료가 된다.

Monitoring of artificial infiltration using electrical resistivity method

  • Nakazato Hiroomi;Kuroda Seiichiro;Okuyama Takehiko;Takeuchi Mutsuo;Park Mikyung;Kim Hee Joon
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
    • /
    • pp.362-369
    • /
    • 2003
  • A infiltration experiment of river water has been conducted to evaluate the applicability of electrical resistivity monitoring methods in an area containing gravelly deposits in Nagaoka, Japan. Apparent resistivity data, which are inverted to obtain the resistivity distribution, are measured with a newly developed system. This system can collect 490 data in an hour and be controlled with PC to store the data. Subsurface resistivity sections, which are obtained from two-dimensional nonlinear inversion of time-lapse apparent resistivity data, enable us to estimate the direction of the flow and the rate of infiltration. The infiltration rate is estimated to be $4.4{\times}10^4m/s$ in the early stage of the experiment when the infiltration process is dominant.

  • PDF

터널을 포함한 전기비저항탐사 2차원 모델링 (2D Resistivity Modeling Including Tunnel)

  • 경규하;조인기;김기주;정재형;배규진;안희윤;김기석
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2007년도 공동학술대회 논문집
    • /
    • pp.179-184
    • /
    • 2007
  • The electrical resistivity method has been widely used for the efficient maintenance of tunnel. In this case, the main purpose of the survey is to find out resistivity distribution around the tunnel. However, resistivity data are severely distorted by the tunnel, which make it hard to detect anomalous zones developed around the tunnel. In this study, using the finite element modeling, we analyze resistivity data distorted by the tunnel. Finally, we propose a simple method to correct the tunnel effect.

  • PDF