• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.628-631
• /
• 2004

In this paper, mechanical properties of concrete incorporating CKD are discussed with W/B and fluidity. For setting properties, an increase in W/B retarded setting time greatly in $5^{\circ}C$, while accelerated in $20^{\circ}C$. For fluidity, an increase in slump delayed the setting time with dosage of SP agent. The presence of CKD has little influence on setting time compared with plain concrete. For compressive strength, an increase in maturity enhanced compressive strength. Fluidity had no relation to compressive strength. At low curing temperature, concrete with CKD has slight strength loss compared with plain concrete. However, remarkable strength loss at low curing temperature in early stage was not found, which can be applicable to low temperature environment concrete placing.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.183-188
• /
• 2002

When Concrete work during winter is placed, it has anxiety that concrete freeze at low temperature. As concrete's freezing cause reduction of durability, it is necessary for mixing to pay attention to Air content and W/C ratios. Accordingly, in this study, we set up three series and evaluate a frost-resistance of concrete with admixture, like fly-ash and blast-furnace slag, for early curing method and types of chemical admixture..The study is composed as; I series : Analysis for early curing method and types of chemical admixture in laboratory II series : Analysis for early curing method and types of chemical admixture in batcher plant and measured concrete' temperature. The result of this study, it was more effective the use of super-plasticizers than air entraining agent.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.10
• /
• pp.4884-4890
• /
• 2012

In this dissertation, the shrinkage and durability of shotcrete were examined. Analysis and comparison of shrinkage against the strength of shotcrete was investigated after performing actual shotcrete shooting for each mix of different percentage of expansive agent. The research on restrained shrinkage with different percentages of expansive agent used (3%, 7%, 11% and 15%) shows that the maximum shrinkage in all samples occurred in between 13-15 hrs after shotcrete shooting. And it is noticed that increasing the percentage of expansive agent can lower the shrinkage. And hence, the 15% of expansive agent not only lowered the shrinkage But it also lowered the strength.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1995.10a
• /
• pp.108-112
• /
• 1995

In this study, the fundamental properties of nonshrinkage high strength concrete using calcium sulphoaluminate cement (CSA cement) which was develiped at the Ssangyong Cement Ind, CO., Ltd. Were considered by some experiments. The concrete using CSA cement show a good workability and higher strength development in early age. And, the resultant compressive strength was also higher than OPC. The drying shrinkage of CSA concrete was much less than that of concrete made with OPC and expansive agent.In addition, the value of drying shrinkage was not dependent on the agitating time and the curing condition. Compared to that of OPC.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.11a
• /
• pp.101-105
• /
• 2009

The purpose of this study is to reduce autogenous shrinkage of high-strength concrete. Previous studies were investigated to measure the effects of reductions to autogenous shrinkage when applying bean oil to concrete. The results of the study showed that as the mixture rate of BO increased, fluidity decreased and air quantity decreased slightly. In early age, compressed strength increased compared to Plain while decreased in long-term age. As an autogenous shrinkage characteristic, reduction effect increased according to increase in mixture rate. When mixture rate is 1%, approximately 30% decreased compared to Plain in BO. At 2%, BO decreased by about 32%. In addition, in the case of BO, autogenous shrinkage was shown to decrease compared to expansive additive and shrinkage-reducing agent.

• Journal of the Korea Concrete Institute
• /
• v.14 no.4
• /
• pp.589-596
• /
• 2002

In this paper, setting and strength performances of concrete containing saccharic type super retarding agents are investigated under various kinds and contents of super retarding agents. According to test results, as super retarding agents contents increase, slump shows to be increased, while air contents decrease about 1∼2％. Setting time shows to be retarded considerably with increase of super retarding agents. It takes 20 days after mixing to reach final setting in case of concrete containing gluconic acid more than 0.3％. And 10 days after mixing in case of enhancing sucrose, white and brown sugar. Compressive strength of concrete containing super retarding agents is lower than that of plain concrete at early age. However, it keeps up with and exceeds the compressive strength of plain concrete at later age. White sugar md brown sugar shows positive performances in delaying setting time and strength compared to existing super retarding agents. n further investigations on durability are conducted, it is thought that application of white sugar as super retarding agent is available.

• Resources Recycling
• /
• v.22 no.6
• /
• pp.12-18
• /
• 2013

In this Study, it was fabricated that shrinkage reducing agent and mortar used $C_{12}A_7$-based slag enhanced the shrinkage reduction and compressive strength. To reduce cement content, setting time, flow and compressive strength of mortar with varying content of fly ash and blast furnace slag were experimented. The flow increased and setting time delayed as the increase of fly ash and blast furnace slag content. And early strength was lower and long age strength was higher than that of mortar with low content of admixture.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.3
• /
• pp.292-303
• /
• 2002

This paper presents experimental results for early-age properties of concrete such as the setting time and strength, evaluated via the ultrasonic pulse velocity (UPV). Developing and using an automatically-recording monitoring system, the UPV's of mortar and concrete with various water to binder ratios (W/B) were measured during the first 24 hours. In addition, probe penetration and compression tests were conducted to measure the setting time and compressive strength, respectively. It was observed that the UPV's of mortar with high W/B remained constant during the first 6.5 hours and then abruptly began to increase at constant rates. On the other hand, the UPV of mortar with low W/B increased relatively slowly and gradually due to the setting retardation caused by the use of high range water reducing agent (HRWR). It was found that setting of concrete occurs when the UPV reaches a certain value. Moreover, it was concluded that the estimation formulas should incorporate the effects of W/B to more accurately estimate the early-age strength of concrete from the UPV.

• Korean Journal of Agricultural Science
• /
• v.14 no.2
• /
• pp.345-357
• /
• 1987

This study was performed to obtain the basic data which can be applied to improve the early strength of concrete. The results obtained were as follows; 1. In case that water reducing-set accelerating agent was added 0.75% of the weight of cement, the weight of water was reducd 10%. And $CaCl_2$ did nearly not have an effect on the w/c ratio. 2. Compressive strength and tensile strength increased 25%, 43%, respectively, in case that $CaCl_2$ was 2.0% of the weight of cement, and showed 120%, 140%, respectively, in case that water reducing-set accelerating agent was 0.75% of the weight of cement. 3. In case of steam curing at $60^{\circ}C$, the strength increased with the ages. At $100^{\circ}C$, the increase of strength in 1 age was two times as compared with plain concrete. After 7ages, the strength was similer to plain concrete. 4. The relationship between compressive strength and tensile strength was linear and was highly significant in cases of plain concrete, $CaCl_2$ concrete, C-W concrete, steam cured concrete, respectively.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.1
• /
• pp.97-102
• /
• 2010

The objective of this paper is to explore the possibility of reuse of waste vegetable oil (WO) as an autogenous shrinkage reducer for high strength concrete and to compare the amount of autogenous shrinkage of the mortar using existing shrinkage reducing agent(SR) and expansive additives(EA). According to test results, as the dosages of WO increased, flow value exhibited to decrease, while the use of SR increased flow value. For the effect of WO on strength, although the use of SR and WO resulted in a slight decrease in compressive strength at early age, at 91 days they had similar strength level of the plain mixture. For autogenous shrinkage, as expected, the addition of WO, SR and EA resulted in a decrease of autogeneous shrinkage considerably especially, WO had superiority in autogenous shrinkage reducing effect compared with the case of SR and EA.