• Title/Summary/Keyword: Early Green

Search Result 688, Processing Time 0.024 seconds

Ecological Green Roofs in Germany

  • Kohler, Manfred
    • Journal of the Korean Society of Environmental Restoration Technology
    • /
    • v.7 no.4
    • /
    • pp.8-16
    • /
    • 2004
  • The industrialization of central Europe more than 100 ago marked the beginning of densely concentrated buildings in quickly growing cities. A cheap type of roofing material of that time was tar. But it was dangerous because it was high inflammable. Then some roofer had a splendid idea. They used sandy material as a final layer atop the impermeable tar layer. These roofs were much more fire resistant than the typical roofs. In this sandy layer some plant species began to grow spontaneously. This was the beginning of the green roof history of modern Europe. A number of these green roofs survived both world wars. In the early 80's in Berlin alone, 50 such buildings existed and they continued to be waterproof until the present day. Since the 1992 Earth Summit of 1992 in Rio de Janeiro(http://www.johannesburgsummit.org/html/basic_info/unced.html) the term "sustainable development" became of central interest of urban designers. In city regions green roofs had become synonymous with this term. With a small investment, long-lasting roofs can be created. Further back in history, more exciting examples of green roofs can be found. The hanging gardens of antiquity are well-known. There are also green roofs built as insulation against cold and heat all over the world. For over 20 years, roof greening in central Europe has been closely examined for various reasons. Roof greening touches several different disciplines. Of primary interest is the durability of the roofs. But ecologists are also interested in green roofs, for instance in biodiversity research. The beneficial effect of greening on water proofing was also proven. For some time, the issue of fire protection was investigated. According to tests, green roofs received a harsh careful rating. Their fire protective property is considered similar to that of tile roofs. Another recent impulse for the green roof movement in Germany has come from the evident improvement of storm water retention and the reduced burden on the sewer system. The question of whether and how much energy green roofs can save has become an urgent question. The state of the research and also various open questions from a central European point of view will be discussed in the context of international collaboration. Apart from academic considerations, those who involve themselves in this issue take a predominantly positive view of the numerous existing green roofs in Germany. In some cities, green roofs are the typical construction technique for new buildings. A few outstanding examples will conclude this review. In Germany, about 20 companies, some of which operate internationally, specialize in green roof consulting. Learning from each other in an open-ended way with respect to different construction techniques and applications in various climatic regions can only be accomplished through such international collaboration as is taking place here.

Regional Differences of Leaf Spot Disease on Grapevine cv. 'Campbell Early' Caused by Pseudocercospora vitis in Plastic Green House (포도 캠벨얼리의 무가온 하우스재배시 지역별 갈색무늬병 발생차이)

  • Jung, Sung-Min;Park, Jong-Han;Park, Seo-Jun;Lee, Han-Chan;Lee, Jae-Wook;Ryu, Myung-Sang
    • Research in Plant Disease
    • /
    • v.15 no.3
    • /
    • pp.193-197
    • /
    • 2009
  • Pseudocercospora leaf spot was major disease of grape cultivar 'Campbell Early' in Korea. Leaf spot first appeared in early June and rapidly dispersed to other leaves through rainy season. Disease progress of leaf spot by Pseudocercospora vitis in plastic green house, in the two provinces (Gimje and Gimcheon), were investigated in 2007. Differences of Infected leaves (%) between cultivation systems were observed in field and plastic green house, but there was no difference between provinces. Micro environmental factors, such as temperature and relative humidity, were correlated with infected leaves by PROC REG procedure of SAS (Statistical Analysis System). As a result, regression model best described ($R^2=0.95^{**}$) the infected leaves as a function of the interaction of cumulated temperatures; Y (Infected leaves)=-7.0101+0.0496$\times$20Hcum (Cumulated hour above 20 degree)+0.0208$\times$20cum (Cumulated temperature above 20 degree)-0.2781$\times$25Hcum (Cumulated hour above 25 degree). A statistics model was shown that cumulated hour and temperature above specific degree were critical factor for Pseudocercospora leaf spot on the grapevine leaves in plastic green house.

Strategies of Diffusing Smart Grids for Low-carbon Green Growth: Grounded Theory Approach (저탄소 녹색성장을 위한 스마트그리드의 확산전략: 근거이론 접근법)

  • Joo, Jae-Hun;Kim, Lyun-Hwa
    • The Journal of Information Systems
    • /
    • v.22 no.1
    • /
    • pp.225-248
    • /
    • 2013
  • Korean government has been implementing a smart grid testbed in Jeju Island for the low-carbon green growth. As smart grids are in the early stage of their diffusion, strategic guidelines and related measures are needed to spread them successfully. In general, the successful diffusion of new technologies or new products are mostly determined in its early stages. With the introduction of smart grids, the electricity market paradigm will be transformed into user-oriented from provider-oriented. Thus, a study on the diffusion of smart grids from the perspective of users is necessary. This paper examines factors affecting the adoption and diffusion of smart grids from users' perspectives and provide strategic guidelines for diffusing the smart grid. Researchers conducted in-depth interviews with 41 people who have been already using smart grids in the Jeju testbed. Semi-structured interviews were used to collect data. The interviews were recorded on a digital voice recorder memory and subsequently transcribed verbatim. A total of 133 pages of transcripts were obtained from about 10 hours interviews. 97 concepts, 47 sub-categories and 19 categories were identified through open coding of grounded theory. We suggested a paradigm model for diffusing smart grids and total of seven propositions as strategic guidelines.

Seasonal Occurrence and Damaged Aspects of Frankliniella occidentalis Pergande (Thysanoptera: Thripidae) by Cultural Environments and Varieties of Chrysanthemum (국화 재배환경과 품종에 따른 꽃노랑총채벌레의 발생 및 가해양상)

  • 박종대;김도익;김선곤
    • Korean journal of applied entomology
    • /
    • v.41 no.3
    • /
    • pp.177-181
    • /
    • 2002
  • This study investigated seasonal occurrence of Frankliniella occidentalis and its damage on chrysanthemum from 1999 to 2000. F. occidentalis adults were attracted to yellow sticky traps from early April to harvesting time in the field. The highest densities were observed from late April to mid-June in spring culture and from mid-August (just after transplanting) to early September in autumn culture respectively. Seasonal fluctuation in a PVC green house was similar to that in the field. Number of insects per flower were higher in the green house than that in the field. Leaf damages due to the insects were observed from mid-May and increased as chrysanthemum grows (R$^2$ = 0.9200-0.9887$\^$**/, p> 0.01).

Strength improvement and micro analysis of limestone-slag cement : role of aluminum sulfate (석회석슬래그 시멘트의 강도향상 및 미세분석 : 황산알루미늄의 역할)

  • Wang, Yi-Sheng;Wang, Xiao-Yong
    • Proceedings of the Korean Institute of Building Construction Conference
    • /
    • 2023.11a
    • /
    • pp.161-162
    • /
    • 2023
  • Limestone slag cement is a green and sustainable building material with huge market potential. However, its shortcoming of low early compressive strength needs to be improved. A method of using aluminum sulfate to improve the early strength of ternary mixed mortar was proposed, and its effect and optimal dosage were tested. Macroscopic properties such as mechanical properties and surface electrical resistivity were measured at different dosages (0%, 1%, 2%, 3%). The microstructure and products of the mixtures were tested in detail, including by scanning electron microscopy, thermogravimetric analysis, and X-ray diffraction. The results show aluminum sulfate enhances mechanical properties and significantly increases surface electrical resistivity. The 1% and 2% doses had no adverse effects on the 28-day mechanical properties, while the 3% dose reduced the 28-day strength. Considering the changes in mechanical properties and surface electrical resistivity, 1% aluminum sulfate is the optimal dosage.

  • PDF

Studies on the life history of green peach aphid, Myzus persicae Sulzer (Homoptera) (복숭아흑진딧물(Myzus persicae Sulzer)의 생활사에 관한 연구)

  • Shim J. Y.;Park J. S.;Paik W. H.;Lee Y. B.
    • Korean journal of applied entomology
    • /
    • v.16 no.3 s.32
    • /
    • pp.139-144
    • /
    • 1977
  • The green peach aphid Myzus persicae(Sulzer), is known as the most important vector of potato leaf-roll virus and PVY. Yield of potato plants infested with these viruses are remarkably lower than non-infested plants. A study was conducted to investigate the life history of the green peach aphid at Suweon, Korea (Lat. $37^{\circ}$'N., Long. $126^{\circ}59$'E). The following were obtained: 1. Overwintering eggs hatched from late March to early April, with a hatching rate averaging ninety-five percent. 2. The fundatrigeniae leave the primary host(Punus persica) in early to mid May and migrate to the secondary hosts. 3. From mid to late Oct., the gymnoparae migrate from the secondary hosts to the primary hosts. 4. From early to mid Nov., gymnoparae lay fertilized eggs around buds, in bark crevices, or between bifurcated twigs of the primary hosts. 5. The early-born progeny have 23 generations and the late-born progeny have 9 generations on peach trees, potatoes and raddish from Apr. to Oct. 6. The average length of life was about 28.5 days, with a developmental period of approximate 10.8 days and a reproductive period of 15.8 days. 7. The average number of nymphs produced by a female was fifty, with a maximum number of 118. 8. The average number of nymphs produced by a female per day was about 3.2, with a maximum number of 13.

  • PDF

Studies on the growth of Korea Lawn Grass (Zoysia japonica Steud.)in Reponse to Nitrogen Application, Clipping Treatment and Plant Density (질소시용, 예초 및 재식밀도가 한국잔디(Zoysia Japonica Steud)의 생육에 미치는 영향)

  • Sim, Jae-Seong
    • The Journal of Natural Sciences
    • /
    • v.1
    • /
    • pp.61-113
    • /
    • 1987
  • The increasing emphasis placed on the production of fine turf for lawns, golf courses, parks, and other recreational sites has led to many unsolved problems as to how such turf could be best established and mainteined. For this purpose, a series of experiments were conducted under con ditions of pot and field. The results obtained were as follows EXPERIMENT I. The effect of nitrogen fertilizer and clipping interval on Zoysia japonica. 1. Increasing the rate of nitrogen and frequent clipping increased tiller number of Zoysis japonica and the maximum number of tillers were obtained from 700 kg N application and freqnent clippings (10 days interval ) in October. Treatment of 350kg N with 10 days clipping interval increased tillers much more than those of 700 kgN with 20 and 30 days clipping intervals. 2. The average number of green leaves occurred during the growth period maximized by applying 700 kg N and clipping 10 days interval. 3. Increasing tiller numbers significantly decreased tops DM weight per tiller by clipping plants at interval of 10 and 20 days, irrespective of nitrogen applied, and with nil N, at the interval of 30 days. By applying 700 kg N, however, top DM weight per tiller increased as the number of tillers increased consistently. 4. The highest top DM weight was achieved from late August to early September by applying 350 and 700kgN. 5. During the growth period, differences in unders ( stolon + root ) DM weight occurred bynitrogen application were found between nil N and two applied nitrogen levels, whereas, at the same level of nitrogen applied, the increase in stolon DM weight enhanced by lengthening the clipping interval to 30 days. 6. Nitrogen efficiency to green leaves, stolon nodes and DM weight of root with high nitrogen was achieved as clipping interval was shortened. 7. By increasing fertilizer nitrogen rate applied, N content n the leaves and stems of Zoysiajaponica was increased. On the other hand, N content in root and stolon had little effect onfertilizer nitrogen, resulting in the lowest content among plant fractions. The largest content of N was recorded in leaves. Lengthening the clipping interval from 10 or 20 to 30 days tends to decrease the N content in the leaves and stems, whereas this trend did not appeared in stolon androot. 8. A positive correlations between N and K contents in tops and stolon were established andthus K content increased as N content in tops and stolon increased. Meanwhile, P content was not affected by N and clipping treatments. 9. Total soluble carbohydrate content in Zoysia japonica was largest in stolon and stem, and was reduced by increasing fertilizer nitrogen rate. Reduction in total soluble carbohydrate due to increased nitrogen rate was severer in the stolons and stems than in the leaves. 10. Increasing the rate of nitrogen applied increased the number of small and large vascular bundles in leaf blade, but shortened distance among the large vascular bundles. Shortening the clipping interval resulted in increase of the number of large vascular bundles but decrease ofdistance between large vascular bundles.EXPERIMENT II. Growth response of Zoysia japonica imposed by different plant densities. 1. Tiller numbers per unit area increased as plant density heightened. Differences in num ber between densities at higher densities than 120 D were of no significance. 2. Tiller numbers per clone attained by 110 days after transplanting were 126 at 40D,77 at 80D, 67 at 120D, 54 at 160D, and 41 at 200D. A decreasing trend of tiller numbers per clone with increasing density was noticable from 100 days after transplanting onwards. 3. During the growth period, the greatest number of green leaves per unit area were attainedin 90days after transplanting at 160D and 200D, and 100 days after transplanting at 40D, 80Dand 120D. Thus the period to reach the maximum green leaf number with the high plantdensity was likely to be earlier that with the low plant density. 4. Stolon growth up to 80 days after transplaning was relatively slow, but from 80 daysonwards, the growth quickened to range from 1.9 m/clone at 40D to 0.6m/clone at 200Din 200 days after transplanting, these followed by the stolon node produced. 5. Plant density did not affect stolon weight/clone and root weight/clone until 80 daysafter transplanting. 6. DM weight of root was heavier in the early period of growth than that of stolon, butthis trend was reversed in the late period of growth : DM weight of stolon was much higherthan that of root.EXPERIMENT Ill. Vegetative growth of Zoysia japonica and Zoysia matrella as affected by nitrogen and clipping height. 1. When no nitrogen was applied to Zoysia japonica, leaf blade which appeared during theAugust-early September period remained green for a perid of about 10 weeks and even leavesemerged in rate September lived for 42 days. However, leaf longevity did not exceed 8 weeks asnitrogen was applied. In contrast the leaf longevity of Zoysia matrella which emerged during the mid August-earlySeptember period was 11 weeks and, under the nitrogen applied, 9 weeks, indicating that thelife-spen of individual leaf of Zoysia matrella may be longer than that of Zoysia japorica. Clipping height had no effect on the leaf longevity in both grasses. 2. During the July-August period, tiller number, green leaf number and DM weightof Zoysia japonica were increased significantly with fertilizer nitrogen, but were not with twolevel of clipping height. This trend was reversed after late September ; no effect of nitrogen wasappeared. Instead, lax clipping increased tiller number, green leaf number and DM weight. Greenleaves stimulated by lax clipping resulted in the occurrance of more dead leaves in late October. 3. Among the stolons outgrown until early September, the primary stolon was not influencedby nitrogen and clipping treatments to produce only 2-3 stolons. However, 1st branch stoIon asaffected by nitrogen increased significantly, so most of stolons which occurred consisted of 1st branch stolons. 4. Until early September, stolon length obtained at nil nitrogen level was chiefly caused bythe primary stolons. By applying nitrogen, the primary stolons of Zoysia japonica waslonger than 1st branch stolons when severe clipping was involved and in turn, shorter than 1stbranch stolons when lax clipping was concerned. In Zoysia matrella, 1st branch stolons were muchlonger than the primary stolon when turf was clipped severely but in conditions of lax clippingthere was little difference in length between primary and 1st branch stolons. 5. Stolon nodes of both Zoysia japonica and Z. matrella were positively influenced by nit rogen, but no particular increase by imposing clipping height treatment was marked in Zoysiamatrella. Although the stolon of Zoysia japonica grew until late October, the growthstimulated by nitrogen was not so remarkable as to exceed that by nil N.

  • PDF

Review of Copper Trihydroxychloride, a Green Pigment Composed of Copper and Chlorine (구리와 염소 주성분 녹색 안료 코퍼 트리하이드록시클로라이드(Copper Trihydroxychloride)에 대한 고찰)

  • Oh, Joonsuk;Lee, Saerom;Hwang, Minyoung
    • Korean Journal of Heritage: History & Science
    • /
    • v.53 no.2
    • /
    • pp.64-87
    • /
    • 2020
  • Copper trihydroxychloride (atacamite, botallackite, paratacamite, etc.), the first green pigment used in Mogao Grotto's mural paintings of China, has been known as "copper green", "green salt", and "salt green", etc. and has been used as an important green pigment with malachite. At first, the natural mineral atacamite was employed, but after the Five Dynasties (907~960 CE), synthetic copper trihydroxychloride was primarily used. In Chinese literature, copper green, green salt, and salt green are recorded as being made via reaction with copper powder, Gwangmyeongyeom (natural sodium chloride), and Yosa (natural ammonium chloride), and the prepared material was analyzed to be copper trihydroxychloride. Copper trihydroxychloride pigment was not found in paintings prior to the Joseon Dynasty (1392~1910 CE) in Korea. In analysis of the green pigments used in paintings and the architectural paintworks in the Joseon Dynasty, copper trihydroxychloride was also shown to have been used as an important green pigment with malachite (Seokrok). In particular, the proportion of copper trihydroxychloride use was high in Buddhist paintings, shamanic paintings, and dancheongs (decorative coloring on wooden buildings). Some of these turned out to be synthetic copper trihydroxychloride, but it is unclear whether the rest of them are synthetic or natural pigments due to a lack of analyzed data. From literature and painting analyses, the pigment name of copper trihydroxychloride in the Joseon Dynasty turns out to be Hayeob, a dark green pigment. It is believed to have first been prepared by learning from China in the early Joseon period (early 15th century) and its use continued until the late 19th century with imported Chinese pigment. Round or oval particles with a dark core of copper trihydroxychloride which were used in Chinese literature were similar to the synthetic copper trihydroxychloride pigments used in the Joseon Dynasty and Chinese paintings. Therefore, the synthetic copper trihydroxychloride pigments of Korea and China are believed to have been prepared in a similar way.

Consideration of the Early Action in the GHG Emission Reduction (국내 온실가스 감축의 조기행동 인정 방안)

  • Song, Bo-Yun;Park, Su-Mi;Chung, Jin-Do
    • Journal of Korean Society for Atmospheric Environment
    • /
    • v.27 no.2
    • /
    • pp.209-213
    • /
    • 2011
  • Enforcement Decree of the Framework Act on Low Carbon, Green Growth for achieving the country's GHG emission reduction goal of 30% was in effect. The remarkable content of the Act is the managements of targets for GHG reduction. So, the entities that have reduced voluntarily have much interest in the recognition of 'early action'. The recognition of early action is necessary to induce the fair competence of business entities and promote the voluntary GHG reduction. The definite and concrete guidance should be prepared. The important principles for this are the environmental integrity and the additionality. Based on this, the early action activities must be restricted to the voluntary, real, permanent, quantifiable, verifiable reduction. In the early action recognition, its credit should be allocated additionally set aside from the GHG target allocation in the national total allowance. Through this, the reward for the early reduction should be realized on market mechanism. The effective period to award the early action should be addressed. This can be the period after the enactment of framework on GHG reduction in effect and before the beginning year of GHG target control. It should be set with flexibility through the collection and consultation of the sector's opinions. The appropriate allowance reserve of early action was estimated as approximately 1~1.5% by using the data from the 'Pilot GHG Emission Trading Program' operated by Ministry of Environment. Also, the concrete and detail guidance to construct the necessary infra which is used to register the related information of early action activities should be prepared.

Analysis on Green BIM based Atrium Sizes in the Early Design Stage (Green BIM기반 초기설계 단계에서 타입별 아트리움의 규모산정에 관한 연구)

  • Jeong, Seung-Woo;Lee, Kweon-Hyoung;Kim, In-Han;Choo, Seung-Yeon
    • Korean Journal of Computational Design and Engineering
    • /
    • v.18 no.1
    • /
    • pp.58-70
    • /
    • 2013
  • This study for establishing specific standards of atrium design aims to discuss design of atrium to consider energy performance atrium in office buildings. In order to evaluate a type and a scale of atrium at the early design stage, modeling details of mass design were set as standards of conceptual design. In the experiment, Project Vasari was used to analyze modeling and energy consumption, based on the LOD 100-step suggested by AIA, because there is no guideline to specify a level of modeling details at each design process. From this analysis, the correlation among a simple-typed atrium and scale and energy load was considered. The result of this research is as follows: First, the single-sided atrium reduced energy the most, and it was followed by three-sided, two-sided, four-sided and continuous-typed ones. On the whole, they could decrease energy by up to about 15%. Also, the atrium with a wide facade facing in the south was more favorable to reduce energy. Second, planning the atrium within 10~30% of the whole building area was more energy efficient. Third, rather than the depth, adjusting the length in designing an atrium could reduce cooling and heating loads by 1.5% per 1m. As explained above, energy performance evaluation considering types and planning elements of atrium helps to assess alternatives in a reasonable way. In particular, considering the use of building needs to be preceded to select a type of atrium, although it is also important to consider its planning elements.