• 제목/요약/키워드: EVAPORATION

검색결과 3,557건 처리시간 0.028초

The Mechanism of Gold Deposition by Thermal Evaporation

  • Mark C. Barnes;Kim, Doh-Y.;Nong M. Hwang
    • 한국결정성장학회:학술대회논문집
    • /
    • 한국결정성장학회 2000년도 Proceedings of 2000 International Nano Crystals/Ceramics Forum and International Symposium on Intermaterials
    • /
    • pp.127-142
    • /
    • 2000
  • The charged cluster model states that chemical vapor deposition (CVD) begins with gas phase nucleation of charged clusters followed by cluster deposition on a substrate surface to form a thin film. A two-chambered CVD system, separated by a 1-mm orifice, was used to study gold deposition by thermal evaporation in order to determine if the CCM applies in this case. At a filament temperature of 1523 and 1773 K, the presence of nano-meter sized gold clusters was found to be positive and the cluster size and size distribution increased with increasing temperature. Small clusters were found to be amorphous and they combined with clusters already deposited on a substrate surface to form larger amorphous clusters on the surface. This work revealed that gold thin films deposited on a mica surface are the result of the sticking of 4-10 nm clusters. The topography of these films was similar to those reported previously under similar conditions.

  • PDF

진공 열 증착 기반의 정공수송층 적용을 통한 페로브스카이트 태양전지 (Perovskite Solar Cells through Application of Hole Transporting Layers based on Vacuum Thermal Evaporation)

  • 김혜승;송명훈
    • Current Photovoltaic Research
    • /
    • 제10권1호
    • /
    • pp.23-27
    • /
    • 2022
  • In this study, we investigate organic-inorganic halide perovskite solar cells with a vacuum thermal evaporated hole transporting layer (NPB/MoO3-x). By replacing solution process based Spiro-MeOTAD with vacuum thermal evaporation based NPB/MoO3-x, a thin hole transporting layer was implemented. In addition, parasitic absorption that may occur during the doping process was eliminated by excluding solution process doping. In a solar cell with a thin vacuum thermal evaporated hole transporting layer, the short-circuit current density (Jsc) increased to 23.93 mA/cm2, resulting in the highest power converstion efficiency (PCE) at 18.76%. Considering these results, it is essential to control the thickness of hole transporting layer located at the top in solar cell configuration.

Vertical In-Line Machine Concept for OLED Manufacturing

  • Hoffmann, U.;Campo, M.;Bender, M.
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
    • /
    • pp.742-745
    • /
    • 2004
  • A profitable mass production of Organic Light Emitting Diode (OLED) displays needs a new type of manufacturing equipment. We have developed a vertical In-Line machine (VES400) equipped with linear etch sources (e.g. to activate an ITO layer), standard magnetron sputter sources for ITO and metal and linear evaporation sources for the organic and metal materials. We present new results concerning the linear evaporation sources for organic materials. We have optimized the vertical thickness non uniformity for the evaporation of different organic materials and achieved deviations of less than ${\pm}$ 5 % for the vertical thickness over a substrate height of 400 mm. We will further report first results about the long term stability of the deposition rate for different organic materials using rate control..

  • PDF

논벼 장.단간품종의 증발산제계수와 건물량과의 관계에 대한 연구(I) (Studies on Relations between Various Coeffcients of Evapo-Transpiration and Quantities of Dry Matters for Tall-and Short Statured Varieties of Paddy Rice)

  • 류한열;김철기
    • 한국농공학회지
    • /
    • 제16권2호
    • /
    • pp.3361-3394
    • /
    • 1974
  • The purpose of this thesis is to disclose some characteristics of water consumption in relation to the quantities of dry matters through the growing period for two statured varieties of paddy rice which are a tall statured variety and a short one, including the water consumption during seedling period, and to find out the various coefficients of evapotranspiration that are applicable for the water use of an expected yield of the two varieties. PAL-TAL, a tall statured variety, and TONG-lL, a short statured variety were chosen for this investigation. Experiments were performed in two consecutive periods, a seedling period and a paddy field period, In the investigation of seedling period, rectangular galvanized iron evapotranspirometers (91cm${\times}$85cm${\times}$65cm) were set up in a way of two levels (PAL-TAL and TONG-lL varieties) with two replications. A standard fertilization method was applied to all plots. In the experiment of paddy field period, evapotanspiration and evaporation were measured separately. For PAL-TAL variety, the evapotranspiration measurements of 43 plots of rectangular galvanized iron evapotranspirometer (91cm${\times}$85cm${\times}$65cm) and the evaporation measurements of 25 plots of rectangular galvanized iron evaporimeter (91cm${\times}$85cm${\times}$15cm) have been taken for seven years (1966 through 1972), and for TONG-IL variety, the evapotranspiration measurements of 19 plots and the evaporation measurements of 12 plots have been collected for two years (1971 through 1972) with five different fertilization levels. The results obtained from this investigation are summarized as follows: 1. Seedling period 1) The pan evaporation and evapotranspiration during seedling period were proved to have a highly significant correlation to solar radiation, sun shine hours and relative humidity. But they had no significant correlation to average temperature, wind velocity and atmospheric pressure, and were appeared to be negatively correlative to average temperature and wind velocity, and positively correlative to the atmospheric pressure, in a certain period. There was the highest significant correlation between the evapotranspiration and the pan evaporation, beyond all other meteorological factors considered. 2) The evapotranpiration and its coefficient for PAL-TAL variety were 194.5mm and 0.94∼1.21(1.05 in average) respectively, while those for TONG-lL variety were 182.8mm and 0.90∼1.10(0.99 in average) respectively. This indicates that the evapotranspiration for TONG-IL variety was 6.2% less than that for PAL-TAL variety during a seedling period. 3) The evapotranspiration ratio (the ratio of the evapotranspiration to the weight of dry matters) during the seedling period was 599 in average for PAL-TAL variety and 643 for TONG-IL variety. Therefore the ratio for TONG-IL was larger by 44 than that for PAL-TAL variety. 4) The K-values of Blaney and Criddle formula for PAL-TAL variety were 0.78∼1.06 (0.92 in average) and for TONG-lL variety 0.75∼0.97 (0.86 in average). 5) The evapotranspiration coefficient and the K-value of B1aney and Criddle formular for both PAL-TAL and TONG-lL varieties showed a tendency to be increasing, but the evapotranspiration ratio decreasing, with the increase in the weight of dry matters. 2. Paddy field period 1) Correlation between the pan evaporation and the meteorological factors and that between the evapotranspiration and the meteorological factors during paddy field period were almost same as that in case of the seedling period (Ref. to table IV-4 and table IV-5). 2) The plant height, in the same level of the weight of dry matters, for PAL-TAL variety was much larger than that for TONG-IL variety, and also the number of tillers per hill for PAL-TAL variety showed a trend to be larger than that for TONG-IL variety from about 40 days after transplanting. 3) Although there was a tendency that peak of leaf-area-index for TONG-IL variety was a little retarded than that for PAL-TAL variety, it appeared about 60∼80 days after transplanting. The peaks of the evapotranspiration coefficient and the weight of dry matters at each growth stage were overlapped at about the same time and especially in the later stage of growth, the leaf-area-index, the evapotranspiration coefficient and the weight of dry matters for TONG-IL variety showed a tendency to be larger then those for PAL-TAL variety. 4) The evaporation coefficient at each growth stage for TONG-IL and PAL-TALvarieties was decreased and increased with the increase and decrease in the leaf-area-index, and the evaporation coefficient of TONG-IL variety had a little larger value than that of PAL-TAL variety. 5) Meteorological factors (especially pan evaporation) had a considerable influence to the evapotranspiration, the evaporation and the transpiration. Under the same meteorological conditions, the evapotranspiration (ET) showed a increasing logarithmic function of the weight of dry matters (x), while the evaporation (EV) a decreasing logarithmic function of the weight of dry matters; 800kg/10a x 2000kg/10a, ET=al+bl logl0x (bl>0) EV=a2+b2 log10x (a2>0 b2<0) At the base of the weight of total dry matters, the evapotranspiration and the evaporation for TONG-IL variety were larger as much as 0.3∼2.5% and 7.5∼8.3% respectively than those of PAL-TAL variety, while the transpiration for PAL-TAL variety was larger as much as 1.9∼2.4% than that for TONG-IL variety on the contrary. At the base of the weight of rough rices the evapotranspiration and the transpiration for TONG-IL variety were less as much as 3.5% and 8.l∼16.9% respectively than those for PAL-TAL variety and the evaporation for TONG-IL was much larger by 11.6∼14.8% than that for PAL-TAL variety. 6) The evapotranspiration coefficient, the evaporation coefficient and the transpiration coefficient and the transpiration coefficient were affected by the weight of dry matters much more than by the meteorological conditions. The evapotranspiratioa coefficient (ETC) and the evaporation coefficient (EVC) can be related to the weight of dry matters (x) by the following equations: 800kg/10a x 2000kg/10a, ETC=a3+b3 logl0x (b3>0) EVC=a4+b4 log10x (a4>0, b4>0) At the base of the weights of dry matters, 800kg/10a∼2000kg/10a, the evapotranspiration coefficients for TONG-IL variety were 0.968∼1.474 and those for PAL-TAL variety, 0.939∼1.470, the evaporation coefficients for TONG-IL variety were 0.504∼0.331 and those for PAL-TAL variety, 0.469∼0.308, and the transpiration coefficients for TONG-IL variety were 0.464∼1.143 and those for PAL-TAL variety, 0.470∼1.162. 7) The evapotranspiration ratio, the evaporation ratio (the ratio of the evaporation to the weight of dry matters) and the transpiration ratio were highly affected by the meteorological conditions. And under the same meteorological condition, both the evapotranspiration ratio (ETR) and the evaporation ratio (EVR) showed to be a decreasing logarithmic function of the weight of dry matters (x) as follows: 800kg/10a x 2000kg/10a, ETR=a5+b5 logl0x (a5>0, b5<0) EVR=a6+b6 log10x (a6>0 b6<0) In comparison between TONG-IL and PAL-TAL varieties, at the base of the pan evaporation of 343mm and the weight of dry matters of 800∼2000kg/10a, the evapotranspiration ratios for TONG-IL variety were 413∼247, while those for PAL-TAL variety, 404∼250, the evaporation ratios for TONG-IL variety were 197∼38 while those for PAL-TAL variety, 182∼34, and the transpiration ratios for TONG-IL variety were 216∼209 while those for PAL-TAL variety, 222∼216 (Ref. to table IV-23, table IV-25 and table IV-26) 8) The accumulative values of evapotranspiration intensity and transpiration intensity for both PAL-TAL and TONG-IL varieties were almost constant in every climatic year without the affection of the weight of dry matters. Furthermore the evapotranspiration intensity appeared to have more stable at each growth stage. The peaks of the evapotranspiration intensity and transpiration intensity, for both TONG-IL and PAL-TAL varieties, appeared about 60∼70 days after transplanting, and the peak value of the former was 128.8${\pm}$0.7, for TONG-IL variety while that for PAL-TAL variety, 122.8${\pm}$0.3, and the peak value of the latter was 152.2${\pm}$1.0 for TONG-IL variety while that for PAL-TAL variety, 152.7${\pm}$1.9 (Ref.to table IV-27 and table IV-28) 9) The K-value in Blaney & Criddle formula was changed considerably by the meteorological condition (pan evaporation) and related to be a increasing logarithmic function of the weight of dry matters (x) for both PAL-TAL and TONG-L varieties as follows; 800kg/10a x 2000kg/10a, K=a7+b7 logl0x (b7>0) The K-value for TONG-IL variety was a little larger than that for PAL-TAL variety. 10) The peak values of the evapotranspiration coefficient and k-value at each growth stage for both TONG-IL and PAL-TAL varieties showed up about 60∼70 days after transplanting. The peak values of the former at the base of the weights of total dry matters, 800∼2000kg/10a, were 1.14∼1.82 for TONG-IL variety and 1.12∼1.80, for PAL-TAL variety, and at the base of the weights of rough rices, 400∼1000 kg/10a, were 1.11∼1.79 for TONG-IL variety and 1.17∼1.85 for PAL-TAL variety. The peak values of the latter, at the base of the weights of total dry matters, 800∼2000kg/10a, were 0.83∼1.39 for TONG-IL variety and 0.86∼1.36 for PAL-TAL variety and at the base of the weights of rough rices, 400∼1000kg/10a, 0.85∼1.38 for TONG-IL variety and 0.87∼1.40 for PAL-TAL variety (Ref. to table IV-18 and table IV-32) 11) The reasonable and practicable methods that are applicable for calculating the evapotranspiration of paddy rice in our country are to be followed the following priority a) Using the evapotranspiration coefficients based on an expected yield (Ref. to table IV-13 and table IV-18 or Fig. IV-13). b) Making use of the combination method of seasonal evapotranspiration coefficient and evapotranspiration intensity (Ref. to table IV-13 and table IV-27) c) Adopting the combination method of evapotranspiration ratio and evapotranspiration intensity, under the conditions of paddy field having a higher level of expected yield (Ref. to table IV-23 and table IV-27). d) Applying the k-values calculated by Blaney-Criddle formula. only within the limits of the drought year having the pan evaporation of about 450mm during paddy field period as the design year (Ref. to table IV-32 or Fig. IV-22).

  • PDF

증발량 산정을 위한 증발접시계수 산정모형 개발: 서울지점을 중심으로 (Development of pan coefficient model for estimating evaporation: focused on Seoul station)

  • 임창수
    • 한국수자원학회논문집
    • /
    • 제53권7호
    • /
    • pp.557-567
    • /
    • 2020
  • 서울지역에 대해서 6개의 증발접시계수 산정모형들로부터 산정된 증발접시계수를 측정된 증발접시 증발량과 FAO Penman-Monteith 기준증발산량으로부터 산정된 증발접시계수와 비교함으로서 증발접시계수 산정모형들의 활용 적합성을 평가하였다. 적용된 6개의 모형은 Cuenca 모형, Snyder 모형, Pereira 등의 모형, Allen 등의 모형, Orang 모형, 그리고 Raghuwanshi와 Wallender 모형이다. 또한 산정된 증발접시계수를 이용하여 산정된 증발량을 관측된 증발량과 비교분석하였으며, 비교결과를 바탕으로 서울지역에 대해서 증발접시계수 산정모형을 개발하였다. 연구결과에 의하면 기존에 연구자들에 의해서 제안된 6개 증발접시계수 산정모형을 10 m, 15 m 그리고 20 m의 풍역대 거리로 설정하여 적용하는 경우 모든 풍역대 거리에서 Snyder에 의해서 제안된 증발접시계수가 가장 양호한 증발접시계수 산정값을 보였다. 반면에 Pereira 등의 모형으로부터 산정된 증발접시계수 값이 관측값과 가장 큰 차이를 보였다. 따라서 서울지역을 대상으로 Snyder모형을 수정한 증발접시계수 산정모형을 유도하였다. 본 연구에서 제시한 모형을 적용하는 경우 모든 풍역대 거리(10 m, 15 m, 20 m) 조건에서 산정된 월평균 증발량은 동일하게 92.1 mm이고 관측된 월평균 증발량은 91.9 mm로서 다른 모형들과 비교하여 가장 근사한 결과를 보였다.

액화석유가스 용기의 자연 증발량에 관한 연구 (A Study on the Natural Evaporation Capacity of LPG Container)

  • 조영도;김지윤
    • 한국가스학회지
    • /
    • 제5권2호
    • /
    • pp.22-29
    • /
    • 2001
  • 체적거래제에 의하여 소규모 공동주택에 가스를 공급하기 위하여 적절한 용기설치수의 결정 및 용기교체시기에 대한 검토가 필요하다. 그러나 지금까지 국내에 축적된 자료가 없을 뿐만 아니라 용기 설치수의 결정과 용기수 및 가스사용 형태에 따라 용기교체시 남아 있는 액화석유가스 양에 대한 이론적 검토가 없었다. 따라서 본 연구에서는 자연기화능력, 잔량, 용기의 온도, 용기내부 압력 등을 시뮬레이션으로 살펴보았다. 용기표면으로부터 액화석유가스 용기의 총괄 열전달계수의 변화에 따른 자연기화량 변화는 크지 않으며, 실험으로부터 구한 값은 약 $9{\~}13 kcal/m^2{\cdot}hr{\cdot}^{\circ}C$이었다. 그리고 액화석유가스 용기내부의 압력이 압력조정기의 압력조정 하한계에 도달하였을 때 가스방출 유량은 공기로부터 전달되는 열량과 균형을 이루는 일정한 값으로 급격히 감소하였다. LP가스용기의 자연기화능력은 외기온도 및 프로판의 조성에 따라 증가하였고, 연속사용시간에 따라 초기 급격히 감소하여 일정한 값으로 수렴하였다. 한 가구당 용기수는 자동절체기 사용에 의하여 감소시킬 수 있는 것을 알 수 있다.

  • PDF

수직 진동하는 소수성 표면 위 액적의 내부유동 및 증발특성 연구 (Internal Flow and Evaporation Characteristic inside a Water Droplet on a Vertical Vibrating Hydrophobic Surface)

  • 김훈;임희창
    • 대한기계학회논문집B
    • /
    • 제39권7호
    • /
    • pp.579-589
    • /
    • 2015
  • 본 연구의 목적은 수직으로 강제 진동하는 소수성 표면 위에 놓인 액적의 유동 및 증발 특성을 이해하는 것이다. 액적의 공진주파수를 예측하기 위해서 Lamb과 Strani and Sabetta의 이론적 고유진동수식을 이용하였고, 실험값과 비교하여 보다 근접한 고유진동수 식에 대해 타당성을 검증하였다. 액적의 형상 및 내부 유동을 가시화하기 위해 초고속카메라, 초접사렌즈 그리고 연속광을 사용하여 진동하는 소수성 표면 위 액적의 유동 및 증발 특성을 확인하였다. 그 결과 각각의 모드에서 액적은 다양한 형상을 가졌으며, 각각의 액적 내부에서 복잡한 와류가 관찰되었다. 일반적으로, 유동흐름이 대칭축을 따라 위로 상승하여 액적상단에서 표면을 따라 접촉선부근으로 이동하였고, 2차, 4차 모드는 분기형, 6차, 8차 모드는 큰 타원형의 유동패턴을 갖는 것을 확인하였다. 여러 가지 모드 중 4차 모드에서 가장 빠른 유동속도를 가졌으며, 다음은 8, 6, 2차 모드 순서였다. 네 가지 진동 모드에서의 증발률은 4, 8, 6, 2차 모드 순서로 빨랐으며, 각각의 공진에서는 그 주위 주파수 영역보다 빠른 증발률을 보였다. 마지막으로 진동을 이용한 액적의 증발은 4차 모드에서 진행되어야 보다 효율적인 진동 증발을 유도할 수 있다.

급속열분해를 통하여 생산된 바이오오일 액적의 증발 특성에 관한 수치해석적 연구 (Numerical Study on the Evaporation Characteristics of Biocrude-oil Produced by Fast Pyrolysis)

  • 최상규;최연석;김석준;한소영
    • 공업화학
    • /
    • 제27권6호
    • /
    • pp.646-652
    • /
    • 2016
  • 바이오매스는 최근 화석연료의 고갈 및 지구온난화 등의 문제에 대응하기 위한 신재생에너지원으로 많은 관심을 받고 있다. 바이오오일은 폐목재, 농업 및 임업 부산물 등의 바이오매스로부터 급속열분해 과정을 통하여 생산되는 액체연료이다. 바이오오일은 일반적인 석유 계통의 연료에 비하여 점도가 매우 높고 고체상의 불순물을 포함하고 있어 버너 적용시 스프레이 분무 특성이 저하된다. 또한, 바이오오일은 셀룰로오스, 헤미셀룰로오스, 리그닌으로부터 유래되는 수백 종류의 화학종들로 이루어져 있어 일반적인 액체연료와는 액적의 증발 특성이 뚜렷하게 구분된다. 본 연구에서는, 바이오오일의 구성 성분을 아세트산, 레보글루코산, 페놀, 수분으로 단순화하여 액적의 증발 특성에 관한 수치해석적 연구를 수행하였다. 다양한 주위공기 온도, 액적의 초기 지름, 에탄올 혼합 비율에 대하여 액적의 증발 특성을 비교하였다. 주위공기 온도가 높아질수록 바이오오일 액적의 증발 시간은 짧아졌으며, 특히 낮은 온도 범위에서는 증발 시간이 공기온도에 매우 민감하였다. 또한 액적의 지름이 감소할수록, 에탄올 혼합 비율이 증가할수록 증발 시간이 단축됨을 알 수 있었다.

LCD 식각폐액으로부터 질산과 초산의 분리 (Separation of Nitric Acid and Acetic Acid from the Waste Acid in LCD Etching Process)

  • 전희동;노유미;박성국;김주한;신창훈;김주엽;안재우
    • 청정기술
    • /
    • 제14권2호
    • /
    • pp.123-128
    • /
    • 2008
  • LCD 제조공정에서 배출되는 폐에칭액으로부터 조(粗)인산 회수 후 잔류하는 질산, 초산 혼산폐액을 분리하여 자원화함으로써 고부가가치화하고 2차 폐수의 발생이 없는 친환경적인 청정 재활용기술을 개발하고자 진공증발을 이용하여 혼산폐액을 분리하였다. 진공도 -760 mmHg 조건에서 온도의 따른 진공증발 결과 $33^{\circ}C$ 이하에서는 초산만 증발되었으나 $33^{\circ}C$ 이상에서는 초산과 함께 질산이 미량 증발되었다. 초산 회수율을 높이고 질산 증발을 억제하기 위하여 -760 mmHg, $40^{\circ}C$ 조건으로 증발시간에 따른 증발거동을 조사하고 회수되는 증발량을 고려하여 추가로 물과 원액을 공급하였다. 또한 질산만 선택적으로 반응하도록 20 g/L NaOH를 소량씩 단계적으로 공급하였다. 질산 증발은 batch type 에서는 7%이었으나, 물 추가 시 0.78%, 원액 추가 시 0.25%까지 감소하였다. 20 g/L NaOH를 소량씩 단계적으로 공급한 결과 초산 회수율은 100%까지 증가하였으며, 질산은 6.22%까지 증발하였다.

  • PDF

재생 합성수지 투수블록의 표면온도 저감효과에 관한 실험적 연구 (Experimental Study on Reducing Effect for Surface Temperature of Recycled Synthetic-Resin Permeable Block)

  • 이철희;이아름;신은철;유병현
    • 한국지반신소재학회논문집
    • /
    • 제18권1호
    • /
    • pp.79-89
    • /
    • 2019
  • 본 연구는 기존의 콘크리트 투수블록이 아닌 재활용 합성수지를 활용하여 제작된 투수블록의 열섬현상 완화의 기능성 측면인 표면온도의 저감효과를 확인하고자 야외계측과 실내실험을 진행하였다. 야외계측은 건조한 상태와 습윤상태를 고려하여 3일 동안 계측하였고, 실내실험은 건조 조건, 강우 모사 조건, 표층 습윤 조건 등으로 구분하여 온도의 변화와 실험 후 함수율의 증발비율을 확인하였다. 야외계측 결과, 가뭄이 지속되거나 일정수준의 수분이 표층에 없는 건조한 상태에서는 수분의 증발에 의한 기화잠열로 냉각효과가 발휘되기 보다는 투수블록 표면의 알베도에 의한 차이로 표면의 온도가 감소하는 것을 확인하였다. 실내실험 결과, 재생 합성수지 투수블록(RS 투수블록)은 콘크리트 투수블록보다 건조한 상태일때는 더 높은 표면온도를 기록하였으나 강우 모사조건에서는 공극내 수분의 증발이 모세관력에 의해 지속적으로 유지되어 더 높은 온도 저감율 보이는 것으로 나타났다. 실내실험 후 증발율을 측정한 결과 수분의 증발율이 높을수록 온도의 저감효과는 증가하는 것을 확인하였다. 이 결과를 바탕으로 증발율과 온도의 저감율에 대한 상관관계식을 도출하였다.