• Journal of the Korean Ceramic Society
• /
• v.46 no.4
• /
• pp.429-435
• /
• 2009

In this study, we investigated microstructure and the CO gas sensing properties of Ag-CuO-$SnO_2$ thin films prepared by co-evaporation and subsequently thermal oxidation at air atmosphere. The sensitivity of a Cu-Sn films, thermally oxidized at $600^{\circ}C$, is strongly affected by the amount of Cu. At Cu:7 wt%-Sn:93 wt%, the film exhibited a maximum sensitivity of ${\sim}2.3$ to CO gas of 1000 ppm at $300^{\circ}C$. In contrast, the sensitivity of a Sn-Ag film did not change significantly with the amount of Ag. An enhanced sensitivity of ${\sim}3.7$ was observed in the film with a composition of Ag:3 wt%-Cu:4 wt%-Sn:93 wt%, when thermally oxidized at $600^{\circ}C$. In addition, this thin film shows a response time of ${\sim}80$ sec and a recovery time of ${\sim}450$ sec to 1000 ppm CO gas. The results demonstrate that the CO sensitivity of the Ag-CuO-$SnO_2$ thin films may be closely associated with coexistence of $SnO_2$ and SnO phase, decrease in average particle size, and a porous microstructure. We also suggest that co-evaporation and followed by thermal oxidation is a very simple and effective method to prepare oxide gas sensor thin films.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.7
• /
• pp.911-918
• /
• 2002

Evaporation heat transfer coefficients of carbon dioxide($CO_2$), R-22, and R-134a in a horizontal smooth tube were measured and analyzed as a function of heat flux, mass flux, and evaporating temperature. The experiments were carried out by varying heat flux from 10 to 20 $kW/m^2$, mass flux from 170 to 340 $kg/m^2s$, and saturation temperatures of 5 and $10^{\circ}C$. It was found that the heat transfer coefficient of $CO_2$ decreased with a rise of quality due to an earlier liquid-film dryout as compared to R-22 and R-134a. Averaged heat transfer coefficients of $CO_2$ were 22-63% higher than those of R-22 and R-134a at all test conditions. The effects of mass flux and heat flux on averaged heat transfer coefficients were much greater in $CO_2$ than in R-22 and R-134a. When comparing $CO_2$ test results with the correlations in the literature, the existing models yielded large deviations at medium and high qualities. Therefore, a generalized correlation for $CO_2$evaporation heat transfer needs to be developed by including the effects of dryout phenomenon.

• Journal of Mechanical Science and Technology
• /
• v.18 no.12
• /
• pp.2284-2293
• /
• 2004

The evaporation heat transfer coefficient h$\_$r/ and frictional pressure drop Δp$\_$f/ of refrigerant R-134a flowing in the oblong shell and plate heat exchanger were investigated experimentally in this study. Four vertical counterflow channels were formed in the oblong shell and plate heat exchanger by four plates of geometry with a corrugated sinusoid shape of a 45 chevron angle. Upflow of refrigerant R-134a boils in two channels receiving heat from downflow of hot water in other channels. The effects of the refrigerant mass flux, average heat flux, refrigerant saturation temperature and vapor quality of R-134a were explored in detail. Similar to the case of a plate heat exchanger, even at a very low Reynolds number, the flow in the oblong shell and plate heat exchanger remains turbulent. The results indicate that the evaporation heat transfer coefficient h$\_$r/ and pressure drop Δp$\_$f/ increase with the vapor quality. A rise in the refrigerant mass flux causes an increase in the h$\_$r/ and Δp$\_$f/. But the effect of the average heat flux does not show significant effect on the h$\_$r/ and Δp$\_$f/. Finally, at a higher saturation temperature, both the h$\_$r/ and Δp$\_$f/ are found to be lower. The empirical correlations are also provided for the measured heat transfer coefficient and pressure drop in terms of the Nusselt number and friction factor.

• Korean Journal of Materials Research
• /
• v.9 no.7
• /
• pp.707-714
• /
• 1999

To save electrical energy as much as 40 % for fluorescent lighting, the reflectors coated with silver reflective thin films recently became popular with higher reflectivities and long life. The thin films fabricated by using sputtering techniques are produced mainly in U.S.A. On the other hand, some silver films deposited by using evaporation methods show low adhesion in general, although the reflectivity is no problem. We have studied various PVD methods to obtain thin films with high reflectivity and adhesion on a substrate of polyester, for a couple of years. Silver films manufactured byusing evaporation showed the reflectivity of 96.4 % and the adhesion of $12 kg/\textrm{cm}^2$. while samples manufactured by using sputtering depicted the adhesion as much as $20 Kg/\textrm{cm}^2$ that is almost double, although their reflectivity was not much different. X-ray diffraction spectra for the sputtered films demonstrated a preferential growth on (111) plane and the cross-sections of the specimens revealed a dense columnar structure to result in the enhanced adhesion.

• Journal of Powder Materials
• /
• v.12 no.3
• /
• pp.167-173
• /
• 2005

Production of weakly agglomerated nanopowders with the characteristic size of about 10 nm and a narrow particle size distribution is still a topical problem especially if the matter is an acceptable output (>50 g/hour), a high purity of the final product, and a low (energy consumption. The available experience and literature data show that the most promising approach to production of such powders is the evaporation-condensation method, which has a set of means for heating of the target. From this viewpoint the use of pulsed electron accelerators for production of nanopowders is preferable since they allow a relatively simple adjustment of the energy, the pulse length, and the pulse repetition rate. The use of a pulsed electron accelerator provides the following opportunities: a high-purity product; only the target and the working gas will interact and their purity can be controlled; evaporation products will be removed from the irradiation zone between pulses; as a result, the electron energy will be used more efficiently; adjustment of the particle size distribution and the characteristic size of particles by changing the pulse energy and the irradiated area. Considering the obtained results, we developed a design and made an installation for production of nanopowders, which is based on a hollow-cathode pulsed gas-filled diode. The use of a hollow-cathode gas-filled diode allows producing and utilizing an electron beam in a single chamber. The emission modulation in the hollow cathode will allow forming an electron beam 5 to 100 ms long. This will ensure an exact selection of the beam energy. By now we have completed the design work, manufactured units, equipped the installation, and began putting the installation into operation. A small amount of nanopowders has been produced.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.4
• /
• pp.65-74
• /
• 2013

In the manufacture of corrugated box, the fibrous raw materials are mainly consisted of recycled papers, such as KOCC(Korean Old Corrugated Container), kraft sack, and AOCC(American Old Corrugated Container). Among these recycled waste paper, the proportion of KOCC is relatively higher than others in fibrous raw materials. Generally, KOCC shows some poor fiber properties and contains hazardous heavy metal sources. Therefore, it is to evaluate the property of recycled paper sources for eco-friendly corrugated box manufacture. In this study, the physical and mechanical properties of 3 kinds of recycled fibers and their mixed stocks were analyzed. The environmental assessment was also evaluated by analyzing the 4 representative heavy metal contents and evaporation residues in waste papers. As the results, KOCC showed the poorest fiber qualities and had the highest heavy metal contents and evaporation residues among the recycled fibers. Finally, the mechanical strength properties were increased by decreasing KOCC proportion of mixed stock conditions. In addition, the heavy metal contents and evaporation residues were also decreased by increasing recycled AOCC and kraft sack proportion.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.400-400
• /
• 2009

Despite the success of Cu(In,Ga)$Se_2$ (CIGS) based PV technology now emerging in several industrial initiatives, concerns about the cost of In and Ga are often expressed. It is believed that the cost of those elements will eventually limit the cost reduction of this technology. One candidate to replace CIGS is $Cu_2ZnSnSe_4$ (CZTSe), fabricated by co-evaporation technique. Co-evaporation technique will be one of the best methods to control film composition. This type of absorber derives from the $CuInSe^2$ chalcopyrite structure by substituting half of the indium atoms with zinc and other half with tin. Energy bandgap of this material has been reported to range from 0.8eV for selenide to 1.5eV for the sulfide and large coefficient in the order of $10^{14}cm^{-1}$, which means large possibility of commercial production of the most suitable absorber by using the CZTSe film. In this work, Effects of substrate temperature of $Cu_2ZnSnSe_4$ absorber layer on the performance of thin films solar cells were investigated. We reported on some of the absorber properties and device results.

• Food Science and Biotechnology
• /
• v.18 no.2
• /
• pp.565-569
• /
• 2009

This study was conducted to evaluate the effects of different preparation methods on the recovery and quantification of ginsenosides in raw Korean ginseng (Panax ginseng C.A. Meyer). Eight major ginsenosides ($Rb_1$, $Rb_2$, $Rb_3$, Rc, Rd, Re, Rf, and $Rg_1$) were analyzed by high performance liquid chromatography (HPLC), after which the recovery and repeatability of the extraction of those ginsenosides using 3 different preparation methods were compared [A. direct extraction (DE) method, hot MeOH extraction/evaporation/direct dissolution; B. solid phase extraction (SPE) method, hot MeOH extraction/evaporation/dissolution/$C_{18}$ cartridge adsorption/MeOH elution; C. liquid-liquid extraction (LLE) method, hot MeOH extraction/evaporation/dissolution/n-BuOH fractionation]. Use of the DE method resulted in a significantly higher recovery of total ginsenosides than other methods and a relatively clear peak resolution. Use of the SPE and LLE methods resulted in clearer peak resolution, but lower ginsenoside recovery than the DE method. The LLE method showed the lowest ginsenoside recovery and repeatability among the 3 methods. Given that the DE method employed only extraction, evaporation, and a dissolution step (avoiding complicate and time consuming purification), this technique may be an effective method for the preparation and quantification of ginsenosides from raw Korean ginseng.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.25 no.2
• /
• pp.86-95
• /
• 1983

Evapotranspiration is a major factor determining the water consumption in the rice fields. Therefore, realistic evapotranspiration estimates are important to the agricultural water resources planning. In Korea, however, the Blaney-Criddle formula, which was developed under the meteorological condition of western arid United States and the upland cultivation, has been widely used to estimate evapotranspiration from paddy fields. Hence, it has considered that the Blaney-Criddle formula would not be the proper method for the Korean paddy condition. The purpose of this study is to select the most appropriate and realistic method for estimating evapotranspiraion from paddy field in Korea and to derive crop coefficients using the chosen method. The results are summerized as follows. 1. Total seasonal-average evapotranspiration by the field observation was 660mm for Tongil and 621. Ornm for the Japonica variety of rice. The amount of evapotranspiration for Tongil variety was 6% larger than that of the Japonica variety. 2. There was no significant differences in the amount of evapotranspiration among early, middle and late mature varieties, that is, early 638mm, middle 627mm and late 630mm for the whole growing season. 3. The rate of peak evapotranspiration appeared at the beginning of August and was in the range of 7.7-8. Omm/day according to the different mature varieties. 4. The correlation between pan evaporation data and the calculated evapotranspiration using related meteorological data from various methods suggested such as Radiation (FAO), Hargreaves, Christiansen, Hargreaves-Christiansen, Jensen-Haise, showed high statistic significance. Therefore, it seemed to use those formulars in estimating evapotranspiration inste4 of using pan evaporation data. 5. It was concluded from the analysis of field data that the evapotranspiration estimate for Blaney-Criddle method might not be appropriate in Korea. On the other hand, Penman equation showed more accurate estimation at the flourishing stage of rice than the pan evaporation method. 6. The crop coefficients for the Penman and pan-evaporation method were obtained by graphical representation.

• Journal of the Korean Chemical Society
• /
• v.51 no.6
• /
• pp.577-584
• /
• 2007

The purpose of this study is to suggest how to use the phase diagram for water to explain the evaporation and sublimation in the atmospheric condition. In principle, the phase diagram for water represents a one component system so it cannot be applied to the water contact with the air. When the liquid or solid phase of water exists in the air, always water vapor also exists in the air. In this case, we cannot present this state as a single point on the phase diagram because the pressure of the liquid or solid is different from that of the vapor in the air. However, since the saturation vapor pressure of liquid or solid is altered by negligible amount due to the presence of air, the evaporation and sublimation in the atmospheric condition can be explained using the vapor pressure line and sublimation line on the phase diagram.