• Journal of Chest Surgery
• /
• v.31 no.2
• /
• pp.125-133
• /
• 1998

This study was designed to identify the efficiency of serum troponin-T(s-TnT) level as a diagnostic indicator for the perioperative myocardial damage with open heart surgery(OHS) and to compare with the conventional myocardial enzyme tests such as isoenzyme fraction of creatine kinase(% CK-MB) and isoenzyme ratio of lactate dehydrogenase(LDH1/LDH2 ratio). The study was performed on 30 adult patients who underwent OHS from Jan. 1996 to June 1996 at Inje University Pusan Paik Hospital, and they were divided into two groups accor- ding to aortic clamping time(ACT) duration : group I(ACT＜60 minutes, n=15); group II (ACT＞60 minutes, n=15). S-TnT, % CK-MB, and LDH1/LDH2 ratio were measured in serial blood samples from all subjected patients. The results were obtained as follows. 1. In both groups, s-TnT concentrations increased gradually during OHS and elevated significantly at CPB-10(p＜0.001). The peak level was noticed at POD 1 in group I(1.10 $\pm$0.19 ng/ml), whereas, at CPB-off in group II(1.88$\pm$0.42 ng/ml). The elevated levels remained until POD 7 in both groups. 2. %CK-MB was risen significantly with the initiation of operations(p＜0.001) and the peak levels were noticed at CPB-off in both groups(7.14$\pm$0.86% in group I, 10.69$\pm$1.27% in group II). Thereafter, these levels returned to normal values at POD 3. 3. There were no significant changes in the values of LDH1/LDH2 ratio during and after OHS compared with the control levels(p＞0.05). 4. The serial changes of s-TnT were relatively well correlated with those of changes of % CK-MB(r=0.64, p＜0.05). 5. The serial s-TnT levels were significantly higher in group II than group I from B-ACR to POD 1(p＜0.05), suggesting that duration of aortic clamping time was a major factor concerned with perioperative myocardial injury. In conclusion, measurement of s-TnT is a very useful indicator in assessing the myocardial cell damage and therefore it is expected that serial checking and evaluation of the s-TnT is very available for identification of the perioperative myocardial damage and for postoperative cares in patients with OHS.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.3
• /
• pp.403-411
• /
• 2001

The aim of this study was to evaluate the resistance to degradation of four commercial composite resins in an alkaline solution. The brands studied were Unifil(GC, Japan), Palfique(Tokuyama Japan). Definite$Degussa-H\ddot{u}ls$ AG, Germany). Revolution(Kerr, U.S.A.). Preweighed discs of each brand were exposed 0.1N NaOH solution at $60^{\circ}C$. After 14 days they were removed, neutralized with HCl, washed with water and dried. Resistance to degradation was evaluated on the basis of following parameters: (a) mass loss(%) - determined from pre-and post-exposed specimen weights; (b) Si loss(ppm) - obtained from ICP-AE analysis of solution exposed to specimens; and (c) degradation depth$({\mu}m)$ - measured microscopically (SEM) from polished circular sections of exposed specimens. The results were follows: 1. The mass loss of Unifil was 3.21%, it was the highest of materials. But, there was no significant difference among the materials. 2. The degree of degradation layer depth was $107.69\sim47.40{\mu}m$, the sequence of the degree pf degradation layer depth was in descending order by Unifil, Palfique, Revolution, Definite. There was significant difference among the materials except Palfique and Definite. 3. The Si loss of Paltique was 8940.0ppm, it was the highest. There was significant difference among the materials, except Revolution and Definite(p<0.05). 4. The correlation coefficient between mass loss and degradation depth was relatively high(r = 0.06, p<0.05). 5. There was no significant coefficient correlation between Si loss and mass loss, and/or the degree of degradation layer depth and Si loss. 6. When observed with SEM, destruction of bonding is observed between resin matrix and filler. Above results suggested that the hydrolytic degradation is considered as evaluation factor of composite resins.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.12 no.6
• /
• pp.13-24
• /
• 2017

The purpose of this study is to examine the effect of the management of receivables on the management performance of micro manufacturing industries. The results of the survey are as follows. First, among the factors of management of pre- and post-trade receivables in the micro manufacturing industries, management organization and regulations, contract execution management, bad debt control, which are the subordinate factors of credit control, are positive (+) significant effect on stability. In terms of profitability, management organizations and regulations, which are subordinate factors of credit control management, have a positive (+) significant effect on profitability. The recovery management, which is a factor of management of post - receivable receivables, did not have a significant effect on the stability and profitability of financial management performance. Second, the effect of financial performance on organizational satisfaction is positively related to stability, while profitability has no significant effect on organizational satisfaction. The implication of this study is that pre - trade receivables management is more important than post - trade receivables management in the management of accounts receivables of micro manufacturing industries. Proactive credit management refers to the procedure of establishing and managing personal guarantees and physical guarantees in order to smooth the execution of the obligations at the same time as the contract is concluded through processes such as credit investigation, analysis and evaluation, and sales decision before the contract is concluded. Post receivables management based on the assumption of default is a receivables management procedure from receipt of receivables that are already defaulted to bad debts to bad debt processing. If the collection of receivables is delayed or bad debt is increased, Furthermore, a corporation may be subject to bankruptcy risk (insolvency by paper profits). Therefore, it is meaningful that this study suggests direction to induce change of contract type in advance by understanding the possibility of settlement of accounts receivable and recovery of bad debts within the day of transition in case of contract of micro manufacturing industries.

• Asia pacific journal of information systems
• /
• v.19 no.2
• /
• pp.157-178
• /
• 2009

Corporate credit rating is a very important factor in the market for corporate debt. Information concerning corporate operations is often disseminated to market participants through the changes in credit ratings that are published by professional rating agencies, such as Standard and Poor's (S&P) and Moody's Investor Service. Since these agencies generally require a large fee for the service, and the periodically provided ratings sometimes do not reflect the default risk of the company at the time, it may be advantageous for bond-market participants to be able to classify credit ratings before the agencies actually publish them. As a result, it is very important for companies (especially, financial companies) to develop a proper model of credit rating. From a technical perspective, the credit rating constitutes a typical, multiclass, classification problem because rating agencies generally have ten or more categories of ratings. For example, S&P's ratings range from AAA for the highest-quality bonds to D for the lowest-quality bonds. The professional rating agencies emphasize the importance of analysts' subjective judgments in the determination of credit ratings. However, in practice, a mathematical model that uses the financial variables of companies plays an important role in determining credit ratings, since it is convenient to apply and cost efficient. These financial variables include the ratios that represent a company's leverage status, liquidity status, and profitability status. Several statistical and artificial intelligence (AI) techniques have been applied as tools for predicting credit ratings. Among them, artificial neural networks are most prevalent in the area of finance because of their broad applicability to many business problems and their preeminent ability to adapt. However, artificial neural networks also have many defects, including the difficulty in determining the values of the control parameters and the number of processing elements in the layer as well as the risk of over-fitting. Of late, because of their robustness and high accuracy, support vector machines (SVMs) have become popular as a solution for problems with generating accurate prediction. An SVM's solution may be globally optimal because SVMs seek to minimize structural risk. On the other hand, artificial neural network models may tend to find locally optimal solutions because they seek to minimize empirical risk. In addition, no parameters need to be tuned in SVMs, barring the upper bound for non-separable cases in linear SVMs. Since SVMs were originally devised for binary classification, however they are not intrinsically geared for multiclass classifications as in credit ratings. Thus, researchers have tried to extend the original SVM to multiclass classification. Hitherto, a variety of techniques to extend standard SVMs to multiclass SVMs (MSVMs) has been proposed in the literature Only a few types of MSVM are, however, tested using prior studies that apply MSVMs to credit ratings studies. In this study, we examined six different techniques of MSVMs: (1) One-Against-One, (2) One-Against-AIL (3) DAGSVM, (4) ECOC, (5) Method of Weston and Watkins, and (6) Method of Crammer and Singer. In addition, we examined the prediction accuracy of some modified version of conventional MSVM techniques. To find the most appropriate technique of MSVMs for corporate bond rating, we applied all the techniques of MSVMs to a real-world case of credit rating in Korea. The best application is in corporate bond rating, which is the most frequently studied area of credit rating for specific debt issues or other financial obligations. For our study the research data were collected from National Information and Credit Evaluation, Inc., a major bond-rating company in Korea. The data set is comprised of the bond-ratings for the year 2002 and various financial variables for 1,295 companies from the manufacturing industry in Korea. We compared the results of these techniques with one another, and with those of traditional methods for credit ratings, such as multiple discriminant analysis (MDA), multinomial logistic regression (MLOGIT), and artificial neural networks (ANNs). As a result, we found that DAGSVM with an ordered list was the best approach for the prediction of bond rating. In addition, we found that the modified version of ECOC approach can yield higher prediction accuracy for the cases showing clear patterns.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.12
• /
• pp.1881-1894
• /
• 2015

The objective of this study was to provide information on difficulty of performing tasks, degree of task satisfaction, job satisfaction, organizational commitment, and turnover intention as well as investigate correlations among these factors. Data were collected on employees working at Centers for Children's Foodservice Management, which had been operating for over 6 months until December 2013. The recruitment period was from December 16, 2013 to January 30, 2014. A total of 228 employees (79.7%) participated in the study, and 227 completed questionnaires were analyzed. Statistical analyses were performed on the data utilizing the SPSS V20.0 and AMOS V21.0 programs. The main results of this study were as follows: task satisfaction of employees in charge of 'visiting-teaching' for children was highest (4.24 points), whereas that of employees in charge of financial management was lowest (2.92 points). In terms of evaluation of job satisfaction factors, the score of 'co-worker' was highest (3.99 points) while that of 'payment' was lowest (2.45 points). Average scores of general job satisfaction, organizational commitment, and turnover intention were 3.56 points, 3.54 points, and 3.07 points, respectively. Job achievement was the most significant influencing factor on general job satisfaction, organizational commitment, and turnover intention. According to the path analysis results, the degree of task satisfaction affected job satisfaction. Organizational commitment had a more significant effect on turnover intention than job satisfaction and mediate both job satisfaction and turnover intention. Although employees of CCFSMs endeavor to improve the quality of child-care facility foodservice, some facilities do not. Controlling turnover intention of employees is especially critical for CCFSMs since it is important for each employees to form strong bonds with child-care facilities as well as to shorten the time required to train new employees. Thus, job satisfaction, which is related to organizational commitment and turnover intention, can be improved by considering poorly scored job satisfaction factors such as wage or workload.

• The korean journal of orthodontics
• /
• v.39 no.6
• /
• pp.362-371
• /
• 2009

Objective: The purpose of this study was to compare the longitudinal treatment effects of facemask with rapid maxillary expansion (FM/RME) and chincup (CC) therapy followed by fixed orthodontic treatment (FOT) in Class III malocclusion (CIII) patients. Methods: The samples consisted of twenty-one CIII patients who had similar skeletal and dental characteristics before FM/RME or CC therapy and good retention results (Class I molar/canine relationship and positive overbite/overjet) after FOT (Group 1, FM/RME, n = 11; Group 2, CC, n = 10). Lateral cephalograms were taken before (T0) and after FM/RME or CC therapy (T1), and after FOT and retention (T2). Skeletal and dental variables were measured. Mann-Whitney U-test and Wilcoxon signed-rank test were used for statistical analysis. Results: During T0-T1, FM/RME therapy induced forward movement of point A, and labioversion of the upper incisors. Both groups showed posterior repositioning of the mandible. FM/RME resulted in increase of the vertical dimension; however, CC caused an increase in articular angle and decrease in gonial angle. During T1-T2, both groups exhibited forward growth of point A. Group 1 showed forward growth and counterclockwise rotation of the mandible and increase of IMPA; however, Group 2, showed increase of ANS-Me/N-Me and decrease of overbite. Conclusions: The key factor for successful FM/RME and CC therapy and good retention results might be a harmonized forward growth of the maxilla that could keep pace with the growth and rotation of the mandible.

• Journal of Oral Medicine and Pain
• /
• v.35 no.2
• /
• pp.135-147
• /
• 2010

In this study, the objective masticatory efficiency of two groups of temporomandibular disorder patients, pain and sound groups, was compared with that in a normal group using the MAI (mixing ability Index). The subjective chewing ability was evaluated using questionnaires, such as the Food Intake Ability Index (FIA) and Visual Analogue Scale (VAS). The Oral Health Impact Profile (OHIP)-49K of the patients was also examined to measure the oral health-related quality of life. The results were as follows: 1. The MAI, FIA and VAS in the pain group were significantly lower than in the normal and sound groups. This shows that the chewing efficiency of the pain group was lower than the normal and sound groups (P<0.05). However, there was no significant difference between the sound and normal groups. 2. The OHIP-49K for the oral health-related quality of life showed a significant increase in both the pain and sound groups compared with normal group. This means that the oral health-related quality of life was lower in both the pain and sound groups. 3. There was a correlation between the MAI, FIA and VAS (P<0.01) in all subjects (71 persons). The OHIP-49K was associated with the FIA and VAS. 4. There was a correlation between the FIA and VAS (P<0.05) in the sound group but no correlation in the other groups. 5. There was a correlation between the FIA and VAS in all groups. 6. The VAS was increased significantly in the pain group according to the level of pain reduction after treatment (P<0.05). However, there was no significant increase in the MAI, even though there was an improvement in masticatory efficiency. In addition, there was no difference in the FIA and OHIP-49K according to the level of pain reduction after treatment. In this study, it is believed that pain is a main factor decreasing the masticatory efficiency in patients with temporomandibular disorders. Moreover, TMJ sounds decrease the quality of life but do not decrease the masticatory efficiency. Therefore, it is important to control the pain in order to improve the masticatory efficiency in temporomandibular disorder patients. Moreover, managing both pain and sound can improve the quality of life.

• Journal of Distribution Science
• /
• v.10 no.7
• /
• pp.33-41
• /
• 2012

The purpose of this study is to analyse the state of the energy industry and to determine the efficiency of its functioning on the basis of energy conservation principle and application of innovative technologies aimed at improving the ecological modernisation of agricultural sectors of Kazakhstan. The research methodology is based on an integrated approach of financial and economic evaluation of the effectiveness of the investment project, based on calculation of elasticity, total costs and profitability, as well as on comparative, graphical and system analysis. The current stage is characterised by widely spread restructuring processes of electric power industry in many countries through introduction of new technical installations of energy facilities and increased government regulation in order to enhance the competitive advantage of electricity market. Electric power industry features a considerable value of creating areas. For example, by providing scientific and technical progress, it crucially affects not only the development but also the territorial organisation of productive forces, first of all the industry. In modern life, more than 90% of electricity and heat is obtained by Kazakhstan's economy by consuming non-renewable energy resources: different types of coal, oil shale, oil, natural gas and peat. Therefore, it is significant to ensure energy security, as the country faces a rapid fall back to mono-gas structure of fuel and energy balance. However, energy resources in Kazakhstan are spread very unevenly. Its main supplies are concentrated in northern and central parts of the republic, and the majority of consumers of electrical power live in the southern and western areas of the country. However, energy plays an important role in the economy of industrial production and to a large extent determines the level of competitive advantage, which is a promising condition for implementation of energy-saving and environmentally friendly technologies. In these circumstances, issues of modernisation and reforms of this sector in Kazakhstan gain more and more importance, which can be seen in the example of economically sustainable solutions of a large local monopoly company, significant savings in capital investment and efficiency of implementation of an investment project. A major disadvantage of development of electricity distribution companies is the prevalence of very high moral and physical amortisation of equipment, reaching almost 70-80%, which significantly increases the operating costs. For example, while an investment of 12 billion tenge was planned in 2009 in this branch, in 2012 it is planned to invest more than 17 billion. Obviously, despite the absolute increase, the rate of investment is still quite low, as the total demand in this area is at least more than 250 billion tenge. In addition, industrial infrastructure, including the objects of Kazakhstan electric power industry, have a tangible adverse impact on the environment. Thus, since there is a large number of various power projects that are sources of electromagnetic radiation, the environment is deteriorated. Hence, there is a need to optimise the efficiency of the organisation and management of production activities of energy companies, to create and implement new technologies, to ensure safe production and provide solutions to various environmental aspects. These are key strategic factors to ensure success of the modern energy sector of Kazakhstan. The contribution of authors in developing the scope of this subject is explained by the fact that there was not enough research in the energy sector, especially in the view of ecological modernisation. This work differs from similar works in Kazakhstan in the way that the proposed method of investment project calculation takes into account the time factor, which compares the current and future value of profit from the implementation of innovative equipment that helps to bring it to actual practise. The feasibility of writing this article lies in the need of forming a public policy in the industrial sector, including optimising the structure of energy disbursing rate, which complies with the terms of future modernised development of the domestic energy sector.

• Microbiology and Biotechnology Letters
• /
• v.41 no.3
• /
• pp.311-319
• /
• 2013

In an effort to characterize the physicochemical properties and microbial risks associated with the soy sauce jangachi (Korean traditional pickle), 15 different home-made products, which were prepared from medicinal plants and wild edible vegetables, from head-families of Andong, Kyungsangbuk-do Province in Korea, and 6 different commercial products sold at supermarket, were investigated. The average pH of the mature soaking solutions and plants soaked in the 21 jangachi were $3.99{\pm}0.38$ and $3.51{\pm}0.41$, and the average acidity of the mature soaking solutions and soaked plants were $1.59{\pm}0.54$ and $1.65{\pm}0.76$, respectively. The average brix of the mature soaking solutions and plants soaked were $27.67{\pm}8.38$ and $25.61{\pm}6.60$, respectively. In salinity, which is a major factor in jangachi industry production, the average salinity of the mature soaking solutions and soaked plants were $7.55{\pm}3.26$ and $5.75{\pm}2.23$, respectively. In particular, the hot-peppers, eusuri, du-rup, kaet-ip, kuji-ppong, myeng-i and sancho jangachi were amongst the home-made products, and the salinity was above 8.8%, which was 2 folds-higher than that of the commercial sterilized products, and 1/3-lower than commercial non-sterilized products. The color difference and turbidity of jangachi were dependent on the plant parts used. In microbial risk assessment, the microorganisms related with food-borne disease, such as Escherichia coli, Salmonella sp, and Shigella sp., were not detected. After some time, total cell count analysis revealed that the commercial products sold at supermarkets were more vulnerable than the home-made products.

• Journal of Animal Science and Technology
• /
• v.49 no.6
• /
• pp.857-870
• /
• 2007

This study was conducted to investigate the relationship between the socio-demographic factors and the Korean consumers’ palatability evaluation and to collect the sensory information for development of prediction palatability model of Hanwoo beef. Ten cuts〔Abjin (short plate), Bosup (top sirloin), Cheggt (striploin), Dngsim (loin), Guri (chuck tender), Hongduke (eye of round), Moksim (chuck roll), Sulgit (bottom round), Udoon (top round), Yangi (brisket)〕 were separated from 10 Hanwoo bulls beef(～24 months old) and prepared with the same manner for 3 different cooking methods such as boiling, grilling and roasting. The cooked beef samples were served to 650 consumers recruited from Seoul, Joongbu, Honam and Youngnam locations and evaluated tenderness, juiciness, flavor and overall acceptability. The living location, age, gender, occupation, eating habit and cut were significantly related with the sensory properties when bull beef were cooked as boiled cooking(p<0.05). In grill cooking, only occupation, income and cut had the significant effect on the overall acceptability of Hanwoo bull beef(p<0.01). When bull beef were cooked as Korean traditional roast cooking, consumer’s sensory properties were significantly different by the living location, age, occupation, income, eating habit of consumers and cut(p<0.05). Also, results from the principal component analysis showed that palatability scores of Korean consumers were decided with different contribution scores of tenderness, juiciness, flavor and overall acceptability of cut depending on cooking methods. In conclusion, Korean consumers’ palatability for Hanwoo bull beef were related with the socio-demographic factors and the sensory results were different by cut and cooking methods.