• 제목/요약/키워드: EU Transfer

검색결과 119건 처리시간 0.038초

BaWO4:Dy3+,Eu3+ 백색광 형광체의 발광 특성과 에너지 전달 효율 (Luminescent Properties and Energy Transfer Efficiency of BaWO4:Dy3+, Eu3+ White Light-Emitting Phosphors)

  • 조신호
    • 한국표면공학회지
    • /
    • 제54권3호
    • /
    • pp.112-118
    • /
    • 2021
  • Dy3+- and Eu3+-codoped BaWO4 phosphors for white light-emitting diode were synthesized with different activator ions via a solid-state reaction process. The structural, morphological, and optical properties of the BaWO4:Dy3+,Eu3+ phosphors were investigated as a function of Eu3+ concentration at a fixed concentration of Dy3+ ions. XRD patterns exhibited that all the synthesized phosphors had a tetragonal system, irrespective of the concentrations of Dy3+ and Eu3+ ions. The excitation spectra of the synthesized phosphors were composed of three intense bands centered at 251, 355, and 393 nm and several weak peaks. For the BaWO4:Dy3+,Eu3+ phosphors synthesized with 1 mol% of Eu3+, the emission spectra under ultraviolet excitation at 393 nm showed two strong blue and yellow bands at 485 and 577 nm corresponding to the 4F9/26H15/2 and 4F9/26H13/2 transitions of Dy3+ ions, respectively and several weak bands in the range of 600-700 nm resulting from the 4f transitions of Eu3+ ions. As the concentration of Eu3+ ions increased, intensities of the blue and yellow emission bands gradually decreased while those of the red emissions increased rapidly and the energy transfer efficiency from Dy3+ to Eu3+ ions was 95.3% at 20 mol% of Eu3+. The optimum white light emission with x=0.363, y=0.357 CIE 1931 chromaticity coordinates was obtained for the sample doped with 5 mol% Dy3+ and 1 mol% of Eu3+.

Europium이 첨가된 NaSr(PO3)3형광체의 형광특성 (Luminescence Properties of Europium-doped NaSr(PO3)3 Phosphor)

  • 윤창용;박철우
    • 한국방사선학회논문지
    • /
    • 제13권4호
    • /
    • pp.645-652
    • /
    • 2019
  • 폴리 인산염 모체에 이온 반경이 유사한 Sr과 Eu 치환에 적합한 형광체를 찾아 단일 희토류 이온이 첨가된 형광체를 합성하고 후처리를 통해 형광 영역이 변화를 연구하였다. 고상법을 이용하여 Eu 이온이 첨가된 $NaSr(PO_3)_3$형광체를 합성하고 탄소열환원법을 통하여 $NaSr(PO_3)_3:Eu^{2+}$ 형광체를 완성하였다. 두 형광체 모두 X선 회절 측정을 통하여 결정상을 확인하였다. $NaSr(PO_3)_3:Eu^{3+}$의 여기 및 방출 스펙트럼 모두 $Eu^{3+}$ 농도가 증가할수록 형광 강도가 증가하였고 농도소광을 확인하였다. 방출스펙트럼에서 $Eu^{3+}$ 농도가 높아질수록 $Eu^{3+}$ 주변 환경의 국부적 대칭성이 높아지는 것 알 수 있었다. $NaSr(PO_3)_3:Eu^{2+}$ 농도별 방출스펙트럼에서 $Eu^{2+}$ 이온 농도 증가에 따른 $Eu^{2+}$ 이온 사이의 임계 거리가 가장 가까운 $Eu^{2+}$ 사이의 에너지 전달에 의해 형광이 감소하는 농도소광의 메커니즘을 확인하였다. 단일 희토류 이온이 첨가된 형광체의 후처리를 통해 형광 영역 변화가 가능하며 형광체 내 $Eu^{3+}$ 주변 환경의 국부적 대칭성과 $Eu^{2+}$ 이온간 거리에 따른 에너지 전달 및 농도소광 메커니즘 연구를 통하여 형광 특성 응용에 적합하고 효율성이 높은 형광체 개발에 좋은 모체 결정으로 사용 될 것으로 기대된다.

Elucidation of Electrode Reaction of EuCl3 in LiCl-KCl Eutectic Melts through CV Curve Analysis

  • Kim, Tack-Jin;Jung, Yong-Ju;Kim, Si-Hyung;Paek, Seung-Woo;Ahn, Do-Hee
    • Bulletin of the Korean Chemical Society
    • /
    • 제32권3호
    • /
    • pp.863-866
    • /
    • 2011
  • The electrode reaction of $Eu^{3+}$ in a LiCl-KCl eutectic melt has been re-examined using cyclic voltammetry (CV). In this work, for the first time, the kinetic details of a $Eu^{3+}/Eu^{2+}$ redox system have been completely elucidated, along with the thermodynamic property, through a curve fitting applied to experimental CV data, which were obtained in a wide scan rate range of 0.5 to 10 V/s. The simulated results showed an excellent fit to all experimental CV data simultaneously, even though the curve fittings were performed within a large dynamic range of initial transfer coefficient values, formal potentials, and standard rate constants. As a result, a proper formal potential, transfer coefficient, and standard rate constant for the $Eu^{3+}/Eu^{2+}$ redox system were successfully extracted using the CV curve fitting.

Mechanism of Energy Transfer and Improvement Moist Stability of BaMg$Al_{10}O_{17}$:$Eu^{2+}$, $Mn^{2+}$ Phosphor

  • Liu, Ru-Shi;Ke, Wei-Chih
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
    • /
    • pp.235-238
    • /
    • 2009
  • BaMg$Al_{10}O_{17}$ (BAM) co-doped with $Eu^{2+}$ and $Mn^{2+}$ was synthesized in a solid-state reaction and their luminescence properties were investigated as functions of the concentrations of the sensitizer and activator. BAM:$Eu^{2+}$ had a broad blue emission band at 450 nm and BAM:$Mn^{2+}$ exhibited green emission at 514 nm. The energy transfer from $Eu^{2+}$ to $Mn^{2+}$ was mainly of the resonance-type via an electric dipole-quadrupole interaction. Additionally, the addition of various fluxes such as $AlF_3$ and $BaF_2$ in the synthesis improves the moist and thermal stability. This is particularly important for the phosphor in white light emitting diodes (LEDs).

  • PDF

Efficiency calibration of a coaxial HPGe detector-Marinelli beaker geometry using an 152Eu source prepared in epoxy matrix and its validation by efficiency transfer method

  • Yucel, Haluk;Zumrut, Senem;Nartturk, Recep Bora;Gedik, Gizem
    • Nuclear Engineering and Technology
    • /
    • 제51권2호
    • /
    • pp.526-532
    • /
    • 2019
  • In this study, an in-house $^{152}Eu$ calibration source was produced from a custom epoxy matrix with a density of ${\rho}=1.14g\;cm^{-3}$, which is chemically stable and durable form after its solidification. The homogeneity of $^{152}Eu$ in matrix was obtained better than 98%. For a Marinelli beaker geometry, an efficiency calibration procedure was applied to a n-type, coaxial, 78.5% relative efficient HPGe detector in the energy range of 121.7-1408.0 keV by using in-house $^{152}Eu$ calibration source. Then the measured efficiencies for Marinelli geometry were compared with the results calculated by MEFFTRAN and ANGLE softwares for the validation. Although MEFFTRAN and ANGLE have two different efficiency transfer algorithms to calculate the efficiencies, they usually need to use a reliable and accurate reference efficiency values as input data. Hence, reference efficiency values were obtained experimentally from a multinuclide standard source for the same detector-Marinelli geometry. In the present source characterization, the corrections required for self-absorption and true coincidence summing effects for $^{152}Eu$ gamma-rays were also obtained for a such close counting geometry condition. The experimental results confirmed the validity of efficiency calculations obtained by MEFFTRAN and ANGLE softwares that are calculation tools.

Ba-Mg-Al-O:$Eu^2+$ 청색형광체의 발광특성 (The Luminescence Property of Ba-Mg-Al-O:$Eu^2+$ Blue Phosphors)

  • 김광복;천희곤;조동율;구경완
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2000년도 추계학술대회 논문집
    • /
    • pp.157-161
    • /
    • 2000
  • Blue phosphor of Ba-Mg-Al-O:Eu$^{2+}$ phase was fabricated by conventional firing techniques under reducing atmosphere and its photoluminescence properties are studied with varying Eu concentration and phost-annealing temperature under air atmosphere. This phosphors were well crystallized with particle size in the range of 3~5um and emitted a blue light at a dominent wavelength 450nm for 254nm UV irradiation. The concentration quenching wit Eu$^{2+}$ was that with increasing Eu concentration the energy transfer between the activator ions steadily improves, so that the excitation energy is transported over larger distances through the lattice before luminescence can occur. Thermal quenching also occurred in this phosphor means that in a host lattice with the $\beta$-alumina structure the bond of an Eu$^{2+}$ ion with the nearest-neighbour oxygen ion is much stronger than in a lattice with the magnetoplumbite structure.cture.

  • PDF

Synthesis and luminescence properties of SrS:Eu red phosphors by solid state method

  • Kim, Jae-Myung;Kim, Kyung-Nam;Park, Joung-Kyu;Kim, Chang-Hae;Jang, Ho-Gyeom
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
    • /
    • pp.640-643
    • /
    • 2004
  • We have synthesized SrS:Eu red phosphor by solid state method and investigated to adopt a red phosphor for LEDs. The SrS:Eu phosphor shows broad emission band at 600nm region due to f-d energy transfer of $Eu^{2{\cdot}}$. Our results show that the SrS:Eu red phosphor exhibits the better luminescence efficiency than that of the industrially available product SrS:Eu phosphor.

  • PDF

Eu3+ 농도에 따른 적색 형광체 Gd1-xVO4:Eux3+의 형광 특성 (Photoluminescence Properties of Red Phosphors Gd1-xVO4:Eux3+ Subjected to Eu3+ Concentration)

  • 조신호;조선욱
    • 한국전기전자재료학회논문지
    • /
    • 제25권3호
    • /
    • pp.193-197
    • /
    • 2012
  • $Gd_{1-x}VO_4:{Eu_x}^{3+}$ red phosphors were synthesized with changing the concentration of $Eu^{3+}$ ion by using a solid-state reaction method. The crystal structure, surface morphology, and photoluminescence and photoluminescence excitation properties of the red phosphors were measured by using X-ray diffractometer, field emission-scanning electron microscopy, and florescence spectrometer, respectively. The XRD results showed that the main peak of all the phosphor powders occurs at (200) plane. As for the photoluminescence properties, the maximum excitation spectrum occurred at 306 nm due to the charge transfer band from ${VO_4}^{3-}$ to $Eu^{3+}$ ions and the maximum emission spectrum was the red luminescence peaking at 619 nm when the concentration of $Eu^{3+}$ ion was 0.10 mol.

고연색 LED용 적색 Sr2Si5N8:Eu2+ 형광체의 합성 및 발광특성 연구 (Synthesis and Luminescence of Sr2Si5N8:Eu2+ Red Phosphor for High Color-Rendering White LED)

  • 이성훈;김종수;강태욱;류종호;이상남
    • 반도체디스플레이기술학회지
    • /
    • 제16권4호
    • /
    • pp.11-15
    • /
    • 2017
  • Red phosphors, $Sr_2Si_5N_8:Eu^{2+}$, were synthesized as a single-phase crystal structure by optimizing carbon and $Eu^{2+}$ contents in a carbothermal reduction nitridation method. With increasing $Eu^{2+}$ contents, the photoluminescence spectra were red-shifted from 600 nm peak for 1 mol% for to 700 nm for 7 mol%. It was suggested that this red shift is attributed to the energy transfer from one low-energy sited $Eu^{2+}$ (1) to other high-energy sited $Eu^{2+}$ (2). Finally, the best red sample (620 nm emission peak and 80 nm half width for 3 mole% of $Eu^{2+}$) was packaged on a Blue LED together with two additional green and yellow phosphors, the fabricated White LED showed a high color-rendering index of 90 and white color coordinates of x= 0.321 and y = 0.305.

  • PDF