• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.12
• /
• pp.7012-7017
• /
• 2014

The process of international technical cooperation is quite complex. If the complexity is reduced and mirrored as a simple model, it could be of great assistance to government agencies and staff to support international technical cooperation. The purpose of this paper was to develop the underlying process model in international technical cooperation in the evaluation phase. The paper provides in the second chapter the theoretical background for developing a process model. In the third chapter, the features and the practical model of the evaluation phase are presented. Chapter four presents a case with substantial empirical analysis of the development model. EU FP7th as a case study was examined in the hindsight of international technical cooperation in the evaluation process. The concluding, chapter five, presents the limitations and future research directions. The results show that a new phase can be analyzed on the level of the evaluation step. The limitation of this study was that the empirical study consists of a single case study only. In the future, it will be necessary to study the sub stages of other steps in international technological cooperation.

• Journal of Korea Technology Innovation Society
• /
• v.17 no.1
• /
• pp.45-67
• /
• 2014

National Innovative Capability (NIC) is an important decisive factor where economic growth is concerned. As such, it is very important to measure and manage NIC. The composite index approach is one of the widely used approaches to measuring NIC, but there have been insufficient reviews of its feasibility and reliability. This paper conducted an analysis of the feasibility and reliability of the report on the last three years (i.e. 2011 through 2013) of the Innovation Union Scoreboard (IUS) of the EU, which is the most representative means of measuring NIC. It turned out that its reliability meets the recommended criteria as a result of Chronbach's alpha-based test of the models of IUS-related composite index. However, neither the absolute fit index nor the incremental fit index was found to meet the recommended criteria in a construct validity analysis. It also turned out that predictive validity is very low as a result of panel linear regression analysis of sectors and items of IUS-related composite index. This paper presents a number of considerations to be made when measuring national innovative capability using the composite index approach, as well as major policy suggestions based on the results of the analysis.

• Korea Trade Review
• /
• v.44 no.1
• /
• pp.269-283
• /
• 2019

Due to environmental issues such as global warming, the importance of renewable energy is growing. Solar Power System is one of the most growing eco-friendly energy industries in the world, but Korea's solar energy industry faces fierce competition due to the trade regulations and changes in energy related laws in the major markets such as the U.S., EU and China. Therefore, Korea needs to diversify its export markets towards emerging markets. This paper analyzed 162 countries in the world and developed a model to measure how promising the countries are. GSMI(Grid connected Solar Market Index) and OSMI(Off-grid Solar Market Index) are invented based on the models. By using the developed model and the data of 162 countries over the 15-year period from 2000 to 2014, the foreign markets are ranked for searching the export market. According to the analysis, China, Japan, U.S, India and Taiwan ranked first to fifth in GSMI and OSMI ranking, which were followed by China, India, Bangladesh, Philippines and Afghanistan. The model developed through this research is expected to provide a more reasonable and scientific approach to the advancement of the Korean solar energy industry into overseas markets.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.6
• /
• pp.515-520
• /
• 2010

The noise map has been applied to predicting the effect of noise and establishing the noise abatement measure for several years overseas. However the introduction of the noise map in Korea is at the initial stage. Thus, we surveyed the several prediction models for road traffic noise used in EU, and the method of applying the noise map in noise impact assessment. In order to improve the noise impact assessment we have to apply the noise map, and propose the guideline of predicting the road traffic noise. We intend to obtain coherency and accuracy of prediction results. As a result of this study, we know that the prediction guideline is an essential prerequisite in order to predict the unified and accurate road traffic noise.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2004.10a
• /
• pp.259-279
• /
• 2004

[ $\box$ ] 방송통신 융합의 가속화 $\box$ 통방융합의 Business Models $\box$ 이종망을 통한 다양한 단말에서의 콘텐츠 서비스 $\blacksquare$ Ubiquitous Content Access - Anytime, Anywhere, Any Contene $\box$ 멀티미디어 프레임워크 필수적 - 상호연도 가능한 콘텐츠 생성/보호, 전달, 적응/소비 제공 $\box$ 통방융합 멀티미디어 프레임워크 기술 개발 추진 $\box$ MPEG-21 Multimedia Framework에 기반한 핵심기술 개발 $\blacksquare$ Content Adaptation & Personalization - MPEG-21(DIA), MPEG-7, TV-Anytime Forum $\blacksquare$ End-to-end Qos $\blacksquare$ Scalable Video Coding & Delivery, etc $\box$ UMA 기술 $\box$ EU Project : ENTHRONE

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1996.04a
• /
• pp.162-162
• /
• 1996

70년대 두 차례의 유류파동은 에너지자원의 중요성에 대한 기존의 인식을 급속도로 변화시켰으며, 이와 아울러 신대체에너지를 중심으로 한 신기술의 개발여부와 관련하여 에너지 기술평가모형의 수요를 급증시켰다. 이에 지난 십여년간 구미제국을 중심으로 다양한 에너지신기술을 평가하기 위해 다양한 분석기법들이 개발되어 왔으며 이러한 평가기법들을 총괄적으로 지칭하는 에너지기술평가모형(Energy Technology Assessment Models)은 에너지신기술의 경제적, 기술적 특성과 에너지시스템내에서 신기술의 잠재적 역할을 사전 평가하면서 국가적 차원에서의 에너지연구개발 정책을 수립하는데 널리 이용되어 왔다. 본 연구는 국내 에너지 연구개발 관련자들의 이해부족과 데이터베이스의 미비 등 여러 가지 제약요인들로 에너지기술 평가모형이 널리 실용화되지 못하고 있는 현실을 감안하여 경제/에너지/환경/기술개발정책에 있어서의 에너지부문의 역할을 장기적으로 재평가하고 특히 기존 에너지문제의 제약요인인 환경문제 해결을 위한 에너지 수요관리 평가의 개발 필요성에 부응하기 위하여 기존의 거시 경제적 에너지공급모형과 최근 미국, EU등에서 발전시켜 나가고 있는 경제/에너지/환경/기술개발의 통합모형을 문헌조사를 통해 비교,분석하였다.

• International Journal of Automotive Technology
• /
• v.2 no.4
• /
• pp.135-145
• /
• 2001

DEUTZ AG, co-founded in 1864 by Nicolaus August Otto, the inventor of the four-stroke cycle engine, has developed the new 2013 engine for commercial vehicles on the basis of the tried and tested 1012 and 1013 series. With 4 and 6 cylinder models, the engine covers the power range between 100 and 190 kW. At the time of their introduction to the market, the engines will meet the exhaust emission legislation of EURO IV and incorporate the potential for EURO IV, Further engineering targets were. (Compactness, Favourable power/cost relation, Low weight, Low fuel consumption and Low noise level). All targets could be accomplished in a relatively short development period via the application of modem simulation tools and test methods. In this paper, the design configuration of the engines is described with particular emphasis on measures for noise emission reduction and the combustion system including injection and turbo charging. Furthermore, we demonstrate the engine's potential to fullfill the European emission legislation EU4, which comes into force in 2005.

• Analytical Science and Technology
• /
• v.7 no.4
• /
• pp.505-515
• /
• 1994

$^1H$ NMR spectra for monocyanide ligated ferriprotoporphyrin(hemin) complex and dicyanide coordinated hemin complex in dimethylsulfoxide(DMSO-$d_6$) solution have been recorded and analyzed. NMR spectra of hemin-cyanide complexation in DMSO-$d_6$ exhibit that the cyanide ligation to hemin is temperature-dependent. Thermodynamic parameters for the monocyanide ligated hemin to dicyanide ligated hemin are consistent with endothermic process with ${\Delta}H^{\circ}=736.6cal/mol$ and ${\Delta}S^{\circ}=16.4eu$. Detailed analysis of the anomalous deviation from Curie behavior for CN/DMSO coordinated hemin complex demonstrates the presence of a high spin character, and this weaker axial field relative to the purely low-spin dicyanide hemin complex is supposed to attribute to instantaneously ruptured iron-DMSO bond. This complex may serve as a useful model to characterize electronic/molecular structure of hemoproteins, which one of axial ligands is weak.

• Korean Journal of Soil Science and Fertilizer
• /
• v.9 no.3
• /
• pp.165-181
• /
• 1976

Fertilizer(N,P,K) demand for crop production in 1980, 1990 and 2000 was estimated according to the two proposed models, one of which is fertilizer use efficiency model expressed in $Fn=(Y/E){\cdot}(1-Cs)Eu$, where Fn:fertilizer demand, Y:Crop production estimated, E:nutrient efficiency, Cs:fraction of natural resource nutrient in plant, Eu:fertilizer use efficiency and the other fertilization efficiency model expressed in Fn=Y(1-Cys)/Fe, where Cys:fraction of yield without fertilizer, Fe:fertilization efficiency. Total crop uptake of nutrient and its noncycling portion were estimated as criteria for fertilizer demand and nutrient maintenance. Total crop uptake of N,P,K was 600,000 M/T in 1965 700,000 M/T in 1974 and estimated to 880,000 M/T in 1980, 1,170,000 M/T in 1990 and 1,410,000 M/T in 2000. Fertilizer demand appeares to be about 90% of total crop uptake according to fertilizer use efficiency model and about 87% according to fertilization efficiency model. The noncycling nutrient was about 29% of total crop uptake. Fertilizer demand was almost same to the uptake amount in nitrogen, 1.5 times of uptake in phosphorus and half of uptake in potassium. Varietal development, improvement of soil fertility and cultivation method and development of fertilizer forms appears to decrease fertilizer demand by increasing efficiency term in two models while environmental stress such as low temperature appears to give reverse effect resulting in higher fertilizer demand. Fertilizer consumption in 1974 seemed to be unreasonably high especially in nitrogen and phosphorus and thus the effective use of fertilizer appeared as an urgent problem considering that large fields are still remained in lower fertility.

• Journal of Korean Society for Quality Management
• /
• v.41 no.4
• /
• pp.623-635
• /
• 2013

Purpose: The recent major recalls of hazardous products caused consumer product safety acts to be strengthen worldwide. Although the recall system of hazardous products in Korea has been operating based on Framework Act on Product Safety since 2011, the evaluation of product risk has been relied on not the results of objective incident data but the results of illegal product investigations. The purpose of this paper is to propose a product risk assessment model for Korea using injury data. Methods: The authors derived Korea's risk assessment method by analysing the advantages and disadvantages of the most widely used models in advanced countries such as EU's RAPEX RAG and Janpan's R-MAP. In this study, the level of relative frequency and severity of injury are determined based on the objective incident data and the length of hospitalization respectively. In addition, the injury data occurred during 2011 is applied to the proposed risk assessment model for case study. Results: The data analysed in this paper can be classified as high risk, medium risk, low risk, acceptable risk, and safe products through the matrix f rom the combination of the relative frequency and the severity derived. Conclusion: The proposed risk assessment model in this study has advantage obtaining reliable objective results because it uses actual injury data and redeems the drawbacks of the existing models used in advanced countries. Furthermore, because the proposed model shows the high risk products among many, it is expected to be useful especially for customs whose main job is inspecting the imported goods and the government when selecting the target product groups for safety investigation.