• 한국산업보건학회지
• /
• 제19권2호
• /
• pp.96-101
• /
• 2009

The purpose of this study was to conduct the field validation of alternative method(ETM method) by using non-carcinogenic, and less toxic solvents than NIOSH (National Institute for Occupational Safety and Health) analytical method 5524 for measuring the airborne metalworking fluids in workplaces. We carried out the field validation test by using the exposure chamber, guaranteeing the air sampling homogeneously in a machining environment. The ETM mixed solvent presented the complete solubility of MWFs used in test field. Based on the field test data, the bias of the ETM method from reference method, NIOSH analytical method 5524, was from -7.0% to 5.1%. The overall uncertainty of the ETM nethod was 21.6%, which satisfied the NIOSH criteria for the sampling and analytical criteria.

• 대한원격탐사학회지
• /
• 제26권2호
• /
• pp.87-98
• /
• 2010

한반도 전역과 같은 상대적으로 넓은 지역의 정확한 분류를 위해서는 단일 영상 분류 후 영상정합 방식보다는 영상 정합 후 분류방법이 보다 정확하다. 또한 다중시기 정보는 분류에 매우 유용하게 사용될 수 있다. 본 연구에서는 한반도 전역을 대상으로 최적의 Landsat ETM+ 영상정합 방식을 제시하였다. 한반도 전역에 대해 2000년부터 2001년까지 획득된 총 65개의 Landsat ETM+영상을 이용하여 낙엽기, 이앙기, 개엽기 각각 정합 영상을 제작하였다. 이때 보다 정확한 영상정합을 위해 히스토그램 매칭, 중앙영상을 기준으로 한 1차 회귀식적용방법, Landsat 촬영 패스별로 적용한 1차 회귀식 적용방법, 총 세 가지 상대복사보정 방법을 적용하였다. 적용 결과, 패스별 상대복사보정한 결과가 그 보정 효과가 크면서, 높은 분류 정확도를 나타냈다. 또한 시기별 정합영상을 살펴보면, 개엽기의 정합영상이 타시기에 비해 상대적으로 인접한 영상 간 지표물의 변이가 다양하게 나타나는 것을 볼 수 있었다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2007년도 추계학술대회 논문집
• /
• pp.333-336
• /
• 2007

This paper deals with assessment of potential interference between grounding electrodes using ETM(Electrolytic Tank Modeling) method. When a test current flowed through grounding electrode, potential rise was measured and analyzed using an electrolytic tank in real time. In order to analyze the potential interference between grounding electrodes, ETM method was studies. Potential interference between isolated grounding electrodes was evaluated as functions of the separation distance between grounding electrodes and the configuration of grounding electrode to be induced. It was found that the separation distance between grounding electrodes in reducing the potential interference was a major factor.

• 한국지구과학회지
• /
• 제25권8호
• /
• pp.764-773
• /
• 2004

산불지역 토양의 침식양상을 구분하기위하여 강원도 강릉시 사천면 일대의 산불지역 토양을 조사하였다. 토양은 유기물의 분포양상 및 토양층의 두께, 토양층 발달의 완전성(성숙도)를 근거로 5개 유형으로 구분하였다. 침식 현상은 토양의 유형에 따라 다르게 나타났다. 나뭇잎, 낙엽층, 뿌리, 재 그 밖의 유기물의 피복이 토양의 색과 영상 이미지 반사에 영향을 미치는 중요한 요인이었다. 침식양상의 차이를 보이는 5개 유형의 토양의 Landsat ETM 영상은 토양 유형별로 상이한 반사특성을 보였다. 산불지역 토양의 정규식생지수(NDVI)와 무감독 분류는 토양유형에 따른 Landsat ETM 영상 차이를 잘 반영하기 못하였으나, 최대우도법에 의한 감독분류 기법의 적용시 산불지역에서 침식형태에 따른 토양유형 구분이 가능하였다. 본 연구는 산불지역에서 침식현상을 파악하고 예측하는데 Landsat ETM 영상의 활용이 매우 효과적임을 보여주었다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제27권1호
• /
• pp.50-59
• /
• 2022

There are several methods for separating the baseflow from the hydrograph, and graphical methods (GM) have mostly been used. GMs are those that separate the baseflow from the direct flow simply by connecting rising point with inflection point or points related to some duration from a hydrograph. Environmental tracer method (ETM) is another tool researched and developed under several conditions to estimate the groundwater recharge. The goal of this study is to separate the baseflow component from a storm hydrograph by applying various GMs and ETM, and to compare their results. The baseflow component estimated by ETM was different from the results by GMs in terms of their shapes of fluctuation and flow rates. Another important feature is that the form of the baseflow to which ETM is applied is similar to that of a storm hydrograph. This similarity is presumed to be due to the selection of tracer that respond quickly to rainfall.

• 한국산업보건학회지
• /
• 제16권2호
• /
• pp.91-100
• /
• 2006

The purpose of this study was to validate alternative method by using non-carcinogenic, and less toxic solvents than NIOSH analytical method 5524 for measuring the airborne MWFs in workplaces. In laboratory tests, the ETM solvents(mixture of same volume for ethyl ether, toluene, and ethanol) were selected. The alternative method of analyzing MWFs, referred to as the ETM solvent extraction method, showed 0.04 mg/sample as LOD, and 0.15 mg/sample as LOQ. The analytical precision (pooled CV, coefficient of variation) of the ETM solvent extraction method for analyzing the straight, soluble, semisynthetic, and synthetic metalworking fluid was 1.5%, 2.0%, 2.6%, 1.6%, respectively, which was similar to the precision (2.6%) of NIOSH analytical method (NIOSH 0500) for total dust. The analytical accuracy by recovery test, spiked mass calculated as extractable mass, was almost 100%. As the result of storage stability test, metalworking fluid samples should be stored in refrigerated condition, and be analyzed in two weeks after sampling. The 95% confidence limit of the estimated total standard error for the ETM solvent extraction method for analyzing the straight, soluble, semisynthetic, and synthetic metalworking fluid was ${\pm}12.6%$, ${\pm}12.5%$, ${\pm}14.0%$, and ${\pm}13.6%$, respectively, which satisfied the OSHA sampling and analytical criteria.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.378-381
• /
• 2002

We retrieved the aerosol optical thickness $\tau$$_{a}$ over land from Landsat-7/ETM+ image data using the correlation between the visible reflectance and middle IR reflectance. This band correlation method for aerosol retrieval was originally proposed fur MODIS data analysis by Kaufman et al.(1977). The results of retrieved aerosol optical thickness $\tau$$_{a}$ from Landsat-7/ETM+ data were compared with the simultaneous sky observation data at our study site. We found a good agreement between the retrieved and observed values. We presented the distribution maps of the aerosol optical thickness over land, retrieved from Landsat-7/ETM+ image data. Then, the surface reflectance map was also presented. The aerosol optical thickness over sea was retrieved assuming no reflected contribution from sea in the near IR band. In addition, we discussed some limitations when we apply the band correlation method.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.359-362
• /
• 2004

In multi-dimensional image, ICA-based feature extraction algorithm, which is proposed in this paper, is for the purpose of detecting target feature about pixel assumed as a linear mixed spectrum sphere, which is consisted of each different type of material object (target feature and background feature) in spectrum sphere of reflectance of each pixel. Landsat ETM+ satellite image is consisted of multi-dimensional data structure and, there is target feature, which is purposed to extract and various background image is mixed. In this paper, in order to eliminate background features (tidal flat, seawater and etc) around target feature (laver farm) effectively, pixel spectrum sphere of target feature is projected onto the orthogonal spectrum sphere of background feature. The rest amount of spectrum sphere of target feature in the pixel can be presumed to remove spectrum sphere of background feature. In order to make sure the excellence of feature extraction method based on ICA, which is proposed in this paper, laver farm feature extraction from Landsat ETM+ satellite image is applied. Also, In the side of feature extraction accuracy and the noise level, which is still remaining not to remove after feature extraction, we have conducted a comparing test with traditionally most popular method, maximum-likelihood. As a consequence, the proposed method from this paper can effectively eliminate background features around mixed spectrum sphere to extract target feature. So, we found that it had excellent detection efficiency.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.852-855
• /
• 2006

There is an increasing need to use data from different sensors in order to maximize the chances of obtaining a cloud-free image and to meet timely requirements for information. However, the use of data from multiple sensor systems is depending on comprehensive relationships between sensors of different types. Indeed, a study of inter-sensor relationships is well advanced in the effective use of remotely sensed data from multiple sensors. This paper was concerned with relationships between sensors of different types for vegetation indices (VI). The study was conducted using IKONOS and Landsat-7 ETM+ images. IKONOS and Landsat-7 ETM+ image of the same or about the same dates were acquired. The Landsat-7 ETM+ images were resampled in order to make them coincide with the pixel sizes of IKONOS. Inter-relationships of vegetation indices between images were performed using at-satellite reflectance obtained by converting image digital number (DN). All images were applied to topographic normalization method in order to reduce topographic effect in digital imagery. Also, Inter-sensor model equations between two sensors were developed and applied to other study region. In the result, the relational equations can be used to compute or interpret VI of one sensor using the VI of another sensor.

• 대한원격탐사학회지
• /
• 제25권1호
• /
• pp.85-94
• /
• 2009

본 논문은 중적외선 밴드가 없는 고해상도 QuickBird 화상을 이용하여 옥계 산불피해지의 삼림교란 지도화에 관한 연구이다. Landsat ETM+ ${\Delta}NBR$에 기초한 QuickBird NBR을 통해 산불피해등급도 보다 발전된 산불후 삼림교란도를 작성하였다. 무엇보다 QuickBird 수분지수와 Landsat ETM+ 7(중적외선)밴드 간의 상관계수에 QuickBird 수분지수를 곱한 치환수치로 생성되는 MIR모의밴드를 통해 산불피해 등급도와 산불후 삼림교란도가 제작된다. QuickBird NBR기반의 산불후 삼림교란도는 Landsat ETM+ ${\Delta}NBR$기반의 산불피해등급도와의 비교 정확도 평가에서 본질적 확실의 높은 일치성(KHAT값=0.7886)을 갖고 있어, 산불피해지의 자연복원 나아가 삼림벌채로 야기된 삼림교란에 유용하게 사용될 것이다.