• Journal of Radiation Protection and Research
• /
• v.12 no.1
• /
• pp.1-11
• /
• 1987

Central axis percentage depth-doses, P(%), were measured at the points from the 2.5cm depth of reference point to 20 cm depth with 2.5 cm interval. Distance from the X-ray target to the water phantom($30{\times}30{\times}30cm^3$) surface was 1 m, and at this point three different beam sizes of $5cm{\phi},\;10cm{\phi},\;and\;15cm{\phi}$ were used. While the X-ray tube voltage varied from 150 to 250 kV, the tube current remained constant at 5 mA. Absorbed dose rate in water, $\dot{D}_w$, was determined using the air kerma calibration factor, $N_k$, which was derived from the exposure calibration factor, $N_x$, of the NE 2571 ion chamber. The reference exposure rate, $\dot{X}_c$, was measured using the Exradin A-2 ion chamber calibrated at ETL, Japan. The half value layers of the X-rays determined to meet ETL calibration qualities. The absorbed dose rates determined at the calibration point were compared to the values obtained from Burlin's general cavity theory, and the percentage depth-dose values determined from $N_k$ showed a good agreement with the values of the published depth dose data(BJR Suppl. 17).

• YAKHAK HOEJI
• /
• v.35 no.2
• /
• pp.131-134
• /
• 1991

A new method for the synthesis of butibufen, which is a non steroidal anti-iriflammatory agent, is described. Friedel-Crafts reaction of isobutylbenzene with ethyl $\alpha$-chloro-.alpha.-(methylthio) acetate (1) gives ethyl $\alpha$-methylthio-(p-isobutylphenyl)acetate (2). Ethyl 2-methylthio-2-(4-isobutylphenyl)butyrate (3) is obtained from treatment of the compound (2) with NaH and Etl. Butibufen (5) is synthesized by reductive desulfurization of the compound (3) with zinc dust-acetic acid or Raney nickel, followed by hydrolysis of the resultant ethyl 2-(4-isobutylphenyl)butyrate (4).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.156-156
• /
• 2010

We have developed highly efficient blue phosphorescent organic light-emitting devices (OLED) with simplified architectures using blue phosphorescent material. The basis device structure of the blue PHOLED was anode / emitting layer (EML) / electron transport layer (ETL) / cathode. The dopant was partially doped into the host layer for investigating recombination zone, current efficiency, and emission characteristics of the blue PHOLEDs.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.299-300
• /
• 2010

21세기 에너지산업의 기본 틀은 저 이산화탄소 녹색성장이 자리 잡고 있으며, 세계 각국은 온실가스를 줄이기 위해 신재생 에너지 개발을 강화하고 있다. 우리나라의 현실은 에너지 사용량의 98%를 수입에 의지하고 있어 신재생 에너지 개발이 절대적이라고 할 수 있으며, 에너지 자원이 거의 없는 우리나라에서 태양광을 직접 전기로 변환할 수 있는 태양광 인버터 기술은 매우 중요하다고 판단한다. 본 논문에서는 국내 최초로 CE와 ETL 인증을 획득한 계통연계형 고 효율 태양광 인버터 XP 시리즈에 대하여 기술한다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.9
• /
• pp.696-700
• /
• 2010

We fabricated red and blue organic light emitting display (OLEDs) which had the two kinds of multi-structure of ITO/HIL/HTL/EML/ETL/LiF/Al and ITO/HIL/HTL/EML/ETL/LiF/Al/LiF. In the case of red OLED that had LiF/Al/LiF structure compared to LiF/Al structure, the current density increased from 4.3 mA/$cm^2$ to 7.3 mA/$cm^2$, and the brightness increased from 488 cd/$m^2$ to 1,023 cd/$m^2$ at 7.0 V, and as a result the current efficiency was improved from 11.28 cd/A to 13.95 cd/A. Also in the case of blue OLED that had LiF on Al cathode layer, the current density increased from 1.2 mA/$cm^2$ to 1.8 mA/$cm^2$, and the brightness increased from 45 cd/$m^2$ to 85 cd/$m^2$ at 7.0 V, and as a result the current efficiency was improved from 3.69 cd/A to 4.82 cd/A. Through these experimental results it could be suggested that the LiF layer formed on Al prevents the oxidation of Al surface, and the electrode resistance become low with increase of supplied electrons, therefore the brightness and the efficiency are improved from the influence to the well-balanced bonding of electron and hole at emitting layer.

• The Journal of the Korea Contents Association
• /
• v.9 no.2
• /
• pp.106-114
• /
• 2009

In this study, we are analysing adverse drug events and proposing a technical structure of "adverse drug event surveillance system" using business intelligence technology, hoping that we can use the system commonly and actively. It is the recent trend to adopt both of electronic review and manual review process to surveil adverse drug events and this study construct CDW applying ETL in BI Technology. As the result of analysis, the data pool included 701 doctors who prescribed and 3059 patients(1528 male, 1531 female), of total 318,222 cases, 2,086cases(0.6%) were suspected as having adverse drug events. And the single type of T.bilirubin> 3mg/dL(ADE type-LabR0005) was the most common(548 among 2085 cases) within the framework of signals.

• Korean Journal of Materials Research
• /
• v.23 no.8
• /
• pp.430-434
• /
• 2013

Quantum dots(QDs) with their tunable luminescence properties are uniquely suited for use as lumophores in light emitting device. We investigate the microstructural effect on the electroluminescence(EL). Here we report the use of inorganic semiconductors as robust charge transport layers, and demonstrate devices with light emission. We chose mechanically smooth and compositionally amorphous films to prevent electrical shorts. We grew semiconducting oxide films with low free-carrier concentrations to minimize quenching of the QD EL. The hole transport layer(HTL) and electron transport layer(ETL) were chosen to have carrier concentrations and energy-band offsets similar to the QDs so that electron and hole injection into the QD layer was balanced. For the ETL and the HTL, we selected a 40-nm-thick $ZnSnO_x$ with a resistivity of $10{\Omega}{\cdot}cm$, which show bright and uniform emission at a 10 V applied bias. Light emitting uniformity was improved by reducing the rpm of QD spin coating.At a QD concentration of 15.0 mg/mL, we observed bright and uniform electroluminescence at a 12 V applied bias. The significant decrease in QD luminescence can be attributed to the non-uniform QD layers. This suggests that we should control the interface between QD layers and charge transport layers to improve the electroluminescence.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.6
• /
• pp.51-58
• /
• 2002

In this paper, a 155/311 Mb/s MUX/DEMUX chip using ECL macrocell away has been developed with a single device. This device for a 2.5 Gb/s SDH based transmission system is to interleave the parallel data of 51 Mb/s into 155 Mb/s(or 311 Mb/s) serial data output, and is to interleave a serial input bit stream of 155 Mb/s(or 311 Mb/s) into the parallel output of 51 Mb/s. The input and output of the device ate TTL compatible at the low-speed end, but 100k ECL compatible at the high-speed end. The device has been fabricated with Motorola ETL3200 macrocell away The fabricated chip shows the typical phase margin of 180 degrees and output data skew less than 220ps at the high-speed end.

• Journal of Adhesion and Interface
• /
• v.23 no.2
• /
• pp.17-24
• /
• 2022

Colloidal quantum dots (QDs) have gained attention for applications in quantum dot light emitting diodes (QLEDs) due to their high photoluminescence quantum yield, narrow emission spectra, and tunable bandgap. Nevertheless, non-radiative recombination induced by electron and hole imbalance deteriorates the device efficiency and stability. To overcome the problem, researchers have been trying to enhance hole transport properties of hole transporting layers (HTL) and/or slow down the electron injection in electron transport layer (ETL). Here, we summarize two approaches: i) development of interfacial materials between QD and ETL (or HTL); ii) engineering of HTL by blending or multi-layer approaches.

• Proceedings of the Korean Information Science Society Conference
• /
• 1999.10b
• /
• pp.449-451
• /
• 1999

지금까지 많은 필기 숫자 인식 방법들이 제안되었지만 고도의 신뢰도가 요구되는 은행 수납 장표상의 숫자 인식에 적합한 방법은 아직 발표된 것이 미미한 실정이다. 본 연구에서는 세 개의 분류기의 결과를 융합하여 100%에 가까운 신뢰도를 낼 수 있는 필기숫자 인식 시스템을 제안하였다. Karhunen-Loeve Transform(KLT)를 통하여 특징을 추출하였으며 오류 역전파 신경망(BP), LVQ를 적용한 SOFM(SOFM-LVQ)과 Weignted Several Nearest Neighbor(WSNN)을 분류기로 사용하였다. 융합을 위해서는 다수결(Majority Voting)이 아닌 만장일치제(Unanimous Voting)을 적용하여 신뢰도를 높혔다. ETL-6 DB를 사용하여 실험하였으며 실험 결과 99.95%의 높은 신뢰도를 기록하였다.