• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1297-1299
• /
• 2003

The Present headway on KNR lines varies from 6 to 10 minutes depending on the each line. Therefore KNR would like to reduce the headway of the all lines by 4 minutes with the implementation of ERTMS/ECTS on-board system. With the operation of HSR lines in 2004 the bottleneck would be expected within a few sections such as Seoul-Siheung which will be the common route between KTX and conventional lines. This study will analyze and compare the optimal headway can be accomplished by the ATS trackside and that of ETRMS/ETCS on-board system within the Seoul-Siheung section.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.810-813
• /
• 2003

The present headway on KNR(Korea National Railway) lines varies from 6 to 10 minutes depending on the each line and by the operation of High Speed line in 2004, the bottleneck would be expected within a few sections such as Daejeon-Daejeon shunting yard which will be the common mute between KTX(Korea Train Express) and conventional trains. Therefore, KNR would like to reduce the headway of the all lines by 4 minutes with the implementation of ERTMS/ETCS on-board system. Where ETCS(European Train Control system), the subsystem of ERTMS, is Automatic Train Protection system for safety train running. This study will be analyze expected braking distance and running time depending on characteristics of conventional passenger and freight trains and high speed train will be operated within electrified conventional line for comparing the headways of ATS(Automatic Train Stop) system and ETRMS/ETCS system within the Daejeon-Daejeon shunting yard section.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.3
• /
• pp.62-73
• /
• 2008

In this paper, domestic standard revision plan of dynamic frequency method which is used both in unmanned automatic toll collection system and manned collection system of the express highway is presented. For such ETCS, the infrared rays (870 nm) of active frequency method and the frequency integrated method (5.8 GHz) are adopted and extended to be operated to the all around the Toll Gate. This standardization plan is based on inter connection reference model between OSI (Open System Interconnection) in process of ITS short range radio communication standardization of 5.8 GHz bandwidth to support traffic information and control system service, and the derived revision plan by starting from physical layer which support interoperability for multiple access between RSE (Road Side Equipment) and OBE (On Board Equipment), in which is categorized into physical layer, data link layer, and application layer. In case of radiation power, existing standard is divided by class1 (within 10 m) and Class2 (within 100 m) according to transmission lengthwhile it is operated with just single standard 'Class1' because of notification of Ministry of Information and Communication in 2004. In the case of the limitation value of incident power in communication area, considering operation plan of ETCS that is on actuality operation the measurements are reflected to the standard. In other wort this paper proposed the improvement standard of incident power, pseudo response in the communication area and radiated power in order to secure stability and compatibility among operator systems about the needed part on ETCS operation.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.10a
• /
• pp.202-206
• /
• 2001

The purpose of this research was to study the influence of machining characteristics for aluminum alloys. The effect of metallic microstructural variables on the measures of machinability of aluminum alloys has no been adequately investigated. Machining Characteristics are influenced significantly by mechanical characteristics, composition and structure of material etcs. For improvement of machining characteristics, various studies are reported. In this paper, composition elements add to aluminum alloys within the limit of sustaining mechanical characteristics of metallic material. We have analyzed dynamic characteristics of cutting resistance, tensile strength value, hardness value etcs.

• Proceedings of the KOR-KST Conference
• /
• 2007.05a
• /
• pp.399-408
• /
• 2007

Dedicated Short Range Communications(DSRC) is a block of spectrum in the 5.8GHz band. DSRC is the useful technology of ITS Service. Japan operates ETCS, VICS by DSRC technology and DSRC technology is used ETCS Standard in Korea. There are many kind of utilization of DSRC in ITS. This is a study for traffic information service and collection with DSRC. Traffic management server service traffic information to driving vehicle by RSE(Road Side Equipment). OBU(Onboard Unit) in vehicle send the information to PDA(Personal Digital Assistant). Client S/W show the information to driver by text, pictogram, sound and return PDA H/W ID to OBU. Server make section traffic information by the PDA H/W ID information.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1959-1962
• /
• 2009

In this paper, we derive the hazard which is a criterion of safety assurance by PHA for the ATP equipped in Korea Tilting Train. The ATP onboard equipment in Korea Tilting Train was introduced as ETCS Level l(which is ETCS specification). Also, the ATP trackside equipment was introduced as a ETCS SRS(System Requirement Specification) 2.2.2 and it has a target for commercial operation in 2009 late. In IEC 62278(EN50126), it recommend of PHA to derive a hazard of target system in concept establishment step and estimate if it can control as a tolerable level and then derive safety case to control the hazard by lifecycle. Therefore, we indicate the hazard using criterion of safety assurance by PHA using FRS (Functional Requirement Specification) 5.0. which is a upper criterion than SRS. The hazard of ATP onboard equipment derived in Korea Tilting Train will be able to use as ATP functional hazards of unified onboard equipment in G7 which is a multiple unit and preliminary hazards of ATP onboard equipment in NEL drived by Korail.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.3 no.2 s.5
• /
• pp.41-53
• /
• 2004

This study introduces the process of the field test of ETCS that has been performed by six enterprises for selecting the type of ETCS that will be applied to the internal tall roads. The main communication modes of six enterprises are active RF(radio wave)type and IR(optical wave)type. In this study, communication modes and systems, which are being used by each enterprises, have been compared and analyzed. Besides this, the configuration and the basic performances of the system have been checked. After those, the contents of the field performance test classified by the items of the test and the results of the test, finally, have been analyzed. Through analyzing the test, it is found that an enterprise using IR type and two enterprises using RF type satisfied the standards of the test and the others failed to meet the standards. However, the enterprises seem to be becoming stable by a large number of tests and the effort for improving from general point of view. Although the methods of performance evaluation in this field test considered enough patterns that are used in the present highway or Hi-Pass, there might possibly be some problems in the results because Korea Highway Corporation had decided the method and the number of times of the test according to their own standards about the various situations that can happen. Therefore, it will be needed to develop the method of standards for testing the performance which can be correspond with driver's behavior that can actually happen on the highway or the methods of transportation management.

• Journal of the Korean Applied Science and Technology
• /
• v.24 no.3
• /
• pp.301-308
• /
• 2007

From the experiment result on pharmacetical characteristics and analysis of Garlic extract, some conclusions were obtained as follows. From the results on extract experiment of Garlic, extraction ratio was about 6.0%, and after dried with dry oven from Garlic extract, it obtained about 50%-Garlic extract of solid state. From results on antimicrobial experiment of Garlic extract, number of staphylococcus and fungus in microbe decreased more and more according to time passage. This phenomenon showed that Garlic extract keeps antimicrobial effect. From results on antioxidation experiment of Garlic extract, DPPH scavenging activity of free radical showed that Garlic extract appears more remarkable reduction ability than reference samples. This phenomenon means that antioxidation of Garlic extract appears higher than Vitamin-C and BHA. From results on instrument analysis, inorganic components of K, Na, Ca, Si, Mg, Zn etcs from Garlic extract were detected with ICP/OES and the fatty and aromatic components of trimethyl sulfide, diallyl disulfide, diallyl trisulfide, 2-mercaptobenzothiazole etcs from Garlic extract were detected with GC/MS.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.857-860
• /
• 1997

The purpose of this research was to study the influence of machining characteristics for aluminum alloys. The effect of metallic microstructural variables on the measures of machinability of aluminum alloys has no been adequately investigated. Machining Characteristics are influenced significantly by mechanical characteristics, composition and structure of material etcs. For improvement of machining characteristics, various studies are reported. In this paper, composition elements add to aluminum alloys within the limit of sustaining mechanical characteristics of metallic material. We have analyzed dynamic characteristics of cutting resistance, tensile strength value, hardness value etcs.

• 한국ITS학회:학술대회논문집
• /
• 2003.11a
• /
• pp.262-268
• /
• 2003