• 제어로봇시스템학회논문지
• /
• 제4권2호
• /
• pp.157-162
• /
• 1998

This paper provides some properties of positive real systems in time domain. It is well-known that a positive real system and a bounded real system are closely related by bilinear transform in a frequency domain. By using supply rate and storage function, we show that a positive real system can be transformed into a bounded real system, and that a positive real system can be transformed into another positive real system with in a time domain. Also, we show that an ESPR(extended strictly positive real) system can be decomposed into a feedback system of lossless positive real system and another ESPR system. These results may be used to design an output feedback controller for mixed H$H_2$ESPR problem.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.460-465
• /
• 2004

ESPR project started in 1999 with METI and NEDO support as five-years program in order to develop necessary technologies for the next-generation SST engine. In ESPR program, jet noise reduction technologies are focused as environmentally compatible technologies, which are critical to realize next-generation SST. In designing a lobed mixer nozzle which is a jet noise suppression system, there are many difficulties to understand the detailed flow phenomena occurred in the system because of its complexity. Large Eddy Simulation (LES) was applied to the lobed mixer nozzle flow analysis in ESPR project. The results demonstrated that LES approach was capable of predicting mixing characteristics of a complicated flow.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.453-459
• /
• 2004

An axially staged combustor equipped with an LPP combustion system and CMC liner walls has been investigated for stable combustion and low NOx emissions for the ESPR project. Several fuel injectors were designed and manufactured for the LPP burner, and single sector combustor tests were conducted to evaluate fundamental combustion characteristics such as emissions, instabilities, auto-ignition, and flash back at typical operating conditions from idle to Mn 2.2 cruise. The latest test results showed that the LPP burner had a good potential for the low NOx target. It was also found that the NOx emission level was greatly affected by a distortion in the air flow velocity field upstream of the LPP burner due to the diffuser and fuel feed arm. The CMC material was investigated to apply for the high temperature and low NOx combustor. Annular combustor liner walls were manufactured with the CMC material, and they have been tested at low pressure conditions to evaluate the soundness of the material and the mounting and seal system. This paper reports the latest research activities on the LPP combustion system and CMC liner walls for the ESPR project.

• 한국식품영양과학회지
• /
• 제28권4호
• /
• pp.890-894
• /
• 1999

Microencapsulation of anchovy oil as a core material in sodium alginate as a wall material was inves tigated. Microencapsulation was accomplished by injecting an oil/water emulsion, consisting of a mixture of liquefied sodium alginate and emulsifier, under high pressure through an orifice submerged in a calcium lactate solution. Microcapsules suspended in a dispersion fluid were observed under a fluorescence mi croscope to verify the presence of the capsules and to note coalescence or degradation of the capsules. Optimum conditions for microencapsulation of anchovy oil were obtained when 1.0% aqueous solution of sodium alginate contained 3% of a 1:1 ratio of ESPR 25(polyglycerine＋polylinoleate) and TW 20(sorbitan laurate＋ethylene oxide) as an emulsifier in terms of capsule size and size distribution, and emulsion stability. The airless sprayer produced microcapsules with a diameter between 15.9 and 73.9 m with different concentration of a wall material. The optimum mixing ratio of wall material to core material was 90:10(wt/wt). 0.2% calcium lactate was appropriate as a dispersion fluid.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.779-783
• /
• 2004

First this paper introduces an advanced FADEC (Full Authority Digital Electric Control) for current and future jet engines.It is designed to realize not only stable thrust control, but also performance improvement, reliability enhancement, service life extension, etc. It can be built by using current micro-processor with high computational power and there exists no difficulties but reliability problem of the micro- processor. Next, the simulation results of SFC minimization control are shown. The target engine is a supersonic, low-bypass ratio, 2-spool, combined cycle turbofan, designated as HYPR90T, which consists of a turbo engine for under Mach 3 flight and a ram engine for over Mach 3 flight. he results can then be used for performance optimization of the engine, which plays important role in the advanced FADEC.