• 한국안전학회지
• /
• 제9권4호
• /
• pp.132-136
• /
• 1994

The new spray system is proposed by using a pipe with hygroscopic needle electrode In order to develop an air-cleaning ESP with high collection efficiency for submicron particles and high removal efficiency for NOx, SO$_2$, NH$_3$. Fundamental characteristics of charging water spray, which is not an usual wet type, are investigated experimentally. As a result, corona discharging mode and ozone generation rate are significantly affected by the operational conditions, such as the applied voltage and wet condition of the needle electrode.

• 플랜트 저널
• /
• 제18권1호
• /
• pp.50-54
• /
• 2022

미세먼지 배출 허용 기준이 강화됨에 따라 화력발전소, 제철소, 산업용 열병합 발전소 등 배가스 배출 시설의 미세먼지 제거를 위해 고효율 집진장치 수요가 급증하고 있다. 본 연구에서는 기존 전기집진기에 정전분무 기술을 도입하여 단점을 보완하고 성능을 향상시키는 연구를 진행 중이다. 정전분무는 매우 미세한 액적을 생성하는 목적으로 주로 사용되어왔지만, 집진을 목적으로 할 때는 그 유량이 10mL/min으로 65 ~ 200배에 달하는 고유량 조건이 필요하다. 고유량의 정전분무는 저유량과는 완전하게 다른 분무 형상이 나타나며 코로나 방전 사진 촬영, 그림자 촬영법 등 다양한 촬영을 통하여 이를 가시화하였다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.1238-1243
• /
• 2009

As Social Overhead Capital(SOC) has been expanded, the highway road construction has been accelerated and city road system has been more complicated. So, long road tunnels have been increased and traffic flow rate also has been raised. Accordingly, the exhausting gas of vehicle cars seriously deteriorates the tunnel inside air quality and driving view. In order to improve tunnel inside air quality, it is needed to introduce a compulsory ventilation system as well as natural ventilation mechanism. The former, that is, a special compulsory ventilation facility is very useful and helpful to prevent a tunnel of being contaminated by traffic in most case. In the case of obtaining clearer and longer driving view, the ventilation systems have to be considered in order to remove floating contaminants or exhaust gas from engines. In this paper, discharge electrode design technology will be discussed.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제17권3호
• /
• pp.94-99
• /
• 2009

In the Korean subway station, three types of pre-filters, which include auto filter, electrostatic precipitator (ESP) and auto cleaning demister, are widely used. However, these devices have some problems such as the difficulty of maintenance and high operating cost. In this study, axial-flow cyclone separator was employed as a pre-filter inside a heating, ventilation, and air conditioning (HVAC) system. 3-dimensional computational fluid dynamics (CFD) analysis was performed on a single unit axial-flow cyclone and coupled unit axial-flow cyclone. Calculated and measured pressure drop of the designed axial-flow cyclone were found be comparable to other types of pre-filters and the observed cut-off diameter was less than 10 micron. Considering lower operating and maintenance cost, axial-flow cyclone was proved to be a better solution as a pre-filter.

• 한국폐기물자원순환학회지
• /
• 제34권5호
• /
• pp.518-527
• /
• 2017

The development of renewable energy is currently strongly required to address environmental problems such as global warming. In particular, biomass is highlighted due to its advantages. When using biomass as an energy source, the conversion process is essential. Fast pyrolysis, which is a thermochemical conversion method, is a known method of producing bio-oil. Therefore, various studies were conducted with fast pyrolysis. Most studies were conducted under a lab-scale process. Hence, scaling up is required for commercialization. However, it is difficult to find studies that address the process analysis, even though this is essential for developing a scaled-up plant. Hence, the present study carries out the process analysis of biomass pyrolysis. The fast pyrolysis system includes a biomass feeder, fast pyrolyzer, cyclone, condenser, and electrostatic precipitator (ESP). A two-stage, semi-global reaction mechanism was applied to simulate the fast pyrolysis reaction and a circulating fluidized bed reactor was selected as the fast pyrolyzer. All the equipment in the process was modeled based on heat and mass balance equations. In this study, process analysis was conducted with various reaction temperatures and residence times. The two-stage, semi-global reaction mechanism for circulating fluidized-bed reactor can be applied to simulate a scaled-up plant.

• Korean Chemical Engineering Research
• /
• 제57권4호
• /
• pp.461-468
• /
• 2019

석탄화력발전소에서 발생하는 분진 효율을 높이고 미세먼지와 극미세먼지까지 집진할 필요성이 높아지고 있다. 상압 영역에서 운전되는 플랜트 발생 분진 제거를 위해서는 백필터나 전기집진기를 사용하나, 고온고압에서 운전되는 석탄가스화와 같은 경우는 금속필터나 세라믹필터가 사용된다. 고온고압에서 분진 집진을 위해 2종의 5겹 압착/소결한 금속필터를 제작하였고 이를 사용했을 때 분진 포집효율과 $10{\mu}m$ 이하 입자에 대한 포집 성능을 파악하였다. 석탄가스화 분진에 대한 금속필터의 집진효율은 무게기준으로 99%대에 달하였다. 제작한 금속필터 2종의 미세먼지 입자 이하(< $2.5{\mu}m$) 크기까지 집진성능을 파악하고자 JIS 분진 표준시료를 대상으로 실험을 수행하였고, $1{\sim}2.5{\mu}m$ 입자크기 범위에 대해 97%와 70~82%의 집진 성능을 확인하였다. $1{\mu}m$ 이하 입자크기 영역에서는 입자크기가 작아짐에 따라 제작한 금속필터의 집진효율이 급격히 낮아짐을 볼 수 있었다. 이러한 $1{\mu}m$ 이하 입자들에 대한 집진 제한점을 극복하고자 금속필터 성능의 개선 방안을 제시하였다.