• Journal of KSNVE
• /
• v.8 no.2
• /
• pp.313-323
• /
• 1998

This paper addresses a sliding mode control of vibration in a flexible structure using ER(electro-rheological) dampers. A clamped-clamped flexible structure system supported by two short columns is considered. Three ER dampers to be operated in shear mode are designed on the basis of Bingham model of the arabic gum-based ER fluid, and attached to the flexible beam structure. After deriving the governing equation of motion and associated boundary conditions, a sliding mode controller is formulated to effectively suppress the vibration of the beam structure caused by sinusoidal and random excitations. In the formulation of the controller, parameter variations such as natural frequency deviation are treated to take into account the robustness of control system. The effectiveness of the proposed control system is confirmed by both simulation and experimental results.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2000.04a
• /
• pp.102.2-102.2
• /
• 2000

• Journal of Sensor Science and Technology
• /
• v.18 no.4
• /
• pp.316-321
• /
• 2009

Er-doped ZnO(ZnO:Er) films were deposited onto MgO wafers by ultrasonic spray pyrolysis at 550 $^{\circ}C$ varying the concentration of Er in the deposition source from 0.5 wt% to 3.0 wt%. Annealing of the films in a vacuum was carried out to increase the intensity of ultraviolet(UV) emission from the films. The annealing temperature was between 600$^{\circ}C$ and 800$^{\circ}C$. The crystallographic properties and surface morphology of the films were investigated by X-ray diffraction(XRD)and scanning electron microscope(SEM), respectively. The properties of photoluminescence(PL) for the films were investigated by the dependence of PL spectra on the annealing temperature. X-ray photoelectron spectroscopy(XPS) was conducted to find the composition change in the films by the annealing.

• Journal of the Korean Magnetics Society
• /
• v.4 no.2
• /
• pp.154-159
• /
• 1994

The magneto-optical Kerr spectra(${\lambda}=250~700nm$) of amorphous RE-Co(RE=Ce, Nd, Pr, Gd, Tb, Er, Ho) are compared with those of Y-Co films. It has been found that the Kerr rotation of RE-Co is mainly due to Co in the long wavelength region, whereas at short wavelength Ce, Pr, Nd, and Gd contribute positively, and Tb, Ho, and Er contribute negatively to the Kerr rotation of RE-Co amorphous films. In the interesting energy region(1.5~5.0 eV), the magneto-optical contribution of Pr and Nd are thought to be related with $4f{\uparrow}->5d{\uparrow}$ interband transition, and the contribution of Ce and Gd might be concerned with d->p interband transition. The magneto-optical effect of Tb in the short wavelength region might be related with $4f{\downarrow}->5d{\downarrow}$ and/or $5d{\downarrow}->4f{\downarrow}$, and that of Ho and Er can be explained by $4f{\downarrow}->5d{\downarrow}$ magneto-optical interband transition.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2003.11a
• /
• pp.229-234
• /
• 2003

As electrorheological fluid(ER fluid) has a characteristic that apparent viscosity varies when electric field applied, so rheological characteristic(yield stress & viscosity) changes in proportion to the electric field applied and the response time is very short within a few miliseconds . In case of using ER fluid for journal bearing as lubricant, it is estimated that it's possible to realize very effective journal bearing system that is not complicate and has a very quick response time. It is necessary to examine the influence of rheological characteristic that varies with electric field applied on bearing characteristic to apply ER fluid to journal bearing, however there are few studies for about that. As for the journal bearing, it comes under high shear flow mode that has shear rate range of $10^3\~10^4s^{-1}$ because rotational speed is very high and clearance is small. But most of the studies for about ER fluid issued until now is about the range of $10\~10^2s^{-1}$. So, there are a lot of difficulties to understand the characteristic offish shear flow mode and furthermore it is restricted to make an experiment for about the characteristic of ER fluid because of the limitation of experimental equipment. The equipment was prepared to make an experiment lot high shear flow mode that has the range of $10^3\~10^4s^{-1}$ using ER fluid that is composed of silicon oil with dispersed particle of starch. Using the above system, the fluid characteristic of ER fluid was studied.

• Journal of the Korean Vacuum Society
• /
• v.21 no.6
• /
• pp.322-327
• /
• 2012

The strain effects of ZnSe epilayer on ZnSe/GaAs heterojunction structure grown by molecular beam epitaxy have been investigated by using electroreflectance (ER) spectroscopy. The ER measurements were performed as a function of modulation voltage, dc bias voltage, and temperature. From the room temperature ER spectrum, we observed a heavy-hole (HH: 2.609 eV) and light-hole (LH: 2.628 eV) transitions due to a compressive strain. With increasing the bias voltage, the amplitude of HH transition signal decreased and the amplitude of LH transition signal was almost the same. From the temperature dependence of ER spectra, we have studied the interaction between the strain and the thermal expansion coefficient.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.2
• /
• pp.272-285
• /
• 2003

This study was conducted to observe the microscopic structures of cavities formed after ablation of primary teeth, permanent teeth, enamel and dentin in using a bur and cavities formed after ablation using laser and the following results were obtained after comparing the effects of ablation. Using a #330 bur and Er:YAG laser irradiated at 150 mJ, 200 mJ, 250 mJ and 300 mJ all at the frequency of 5 Hz, 1 mm enamel and dentin samples were ablated and the ablation time was measured. In order to measure the surfaces ablated, 5 each of primary teeth and permanent teeth were ablated using a #330 bur and Er:YAG laser at 150 mJ, 200 mJ, 250 mJ and 300 mJ for 1 sec and the cross section and vertical section were observed. The following results were obtained : 1. Cutting time of Er:YAG laser was longer than that of conventinal high-speed bur regardless of teeth type. 2. Cutting on enamel, Cutting time of conventional high-speed bur in deciduous teeth was longer than in permanent teeth(P<0.05). But Er:YAG laser was not showed any difference between the deciduous and permanent teeth(P>0.05). 3. Cutting on dentin, Cutting time of conventional high-speed bur in permanent teeth was longer than deciduous teeth. Er:YAG laser of 150 mJ, 5 Hz in permanent teeth was longer than in deciduous teeth(p<0.05). But laser of other power did not showed mean difference. 4. The cavity surface treated with the convetional high-speed bur revealed a relatively flat appearance, almost covered with a debris-like smear layer. Cavity wall showed striped appearance because of blade of bur. 5. The cavity surface treated by the Er:YAG laser system was irregular or rough surface with the absence charring, carbonization, or cracking of the dentin. In addition, there was an absence of a smear layer. Cavity floor was round and relatively smooth. According to these results, cutting time of Er:YAG laser was almostly same in permanent and deciduous teeth, but more effective in dentin than enamel. Cutting the sample, Er:YAG laser was needed more time than conventional bur. But SEM findings suggested that laser device produced favorable surface characteristic(i.e, no smear layer, irregular surface, cracking).

• Journal of the korean academy of Pediatric Dentistry
• /
• v.28 no.4
• /
• pp.683-693
• /
• 2001

The purpose of this study was to evaluate the effects of Er:YAG laser on cutting efficacy and its histologic findings. Dentin specimens of human premolars and molars were used and irradiated by Er:YAG laser with noncontact handpiece type delivery system under different treatment condition of irradiation time. Cavity pattern and volume were evaluated to determine the cutting efficacy and following results were obtained. 1. Cutting volume of sound dentin was getting larger with time immersed in water increase 2. With the condition of irradiation (150mJ, 10Hz, 30sec), surface irregularity was more increased in sound dentin comparing to carious dentin. For the light microscopic examination, dentinal tubules were opened and ash flecks and cracks were noted with inconsistence of dentinal tubules. 3. In case of 30 sec. irradiation in carious dentin, dark zone was limited to small focus whereas 1 min. irradiation, more wider, and cracks were noted in the perpendicular to direction of dentinal tubules. For the 2 min. irradiation, cavity was the widest and more cracks were found.

• Development and Reproduction
• /
• v.15 no.2
• /
• pp.179-185
• /
• 2011

Some phytoestrogens in soy and red wine, for example, might have beneficiary rather than adverse effects. In particular, dietary soy intake seems to be highly correlated with protection of breast cancer, osteoporosis and cardiovascular disorders. However, questions persist on the potential adverse effects of the main soy constituent genistein (GS) on female reproductive physiology. Previously we found that prepubertal exposure to GS could activate the reproductive system of immature female rats leading to precocious puberty onset, and intracerebroventricularly (ICV) injected GS could directly activate hypothalamic kisspeptin-GnRH neuronal circuits in adult female rats. The present study was performed to examine the hypothalamus-specific GS effects in prepubertal female rats and which subtype of estrogen receptor is mediated in this GS effect. Prepubertal female rats (PND 30) were anaesthetized, treated with single dose of GS (3.4 ${\mu}g$/animal), and sacrificed at 2 hrs post-injection. To determine the transcriptional changes of reproductive hormone-related genes in hypothalamus, total RNAs were extracted and applied to the semi-quantitative reverse transcription polymerase chain reaction (RT-PCR). ICV infusion of GS significantly lowered the transcriptional activities of mTOR (1:$0.361{\pm}0.058$ AU, p<0.001) but increased that of GAD67 (1:$1.285{\pm}0.099$ AU, p<0.05), which are known to act as an upstream modulator of kisspeptin and GnRH neuronal activities in the hypothalamus, respectively. GS administration enhanced significantly the mRNA levels of KiSS-1(1:$1.458{\pm}0.078$ AU, p<0.001), and exerted no effect on the mRNA level of kisspeptin receptor GPR-54 (1:$1.29{\pm}0.08$ AU). GnRH gene expression was significantly decreased in GS-treated group compared to control group (1:$0.379{\pm}0.196$ AU, p<0.05). There was no difference in the mRNA level of $ER{\alpha}$ in the GS-treated group compare to control group (1:$1.180{\pm}0.390$ AU, Fig. 3A). However, icv infusion of GS significantly increased the transcriptional activities of $ER{\beta}$ (1:$4.209{\pm}0.796$ AU, p<0.01, Fig. 3B). Taken together, the present study indicated that the acute exposure to GS could directly alter the hypothalamic GnRH modulating system in prepubertal female rats. Our study strongly suggested the involvement of $ER{\beta}$ pathway in GS's hypothalamus-specific action, and this idea is consistent with the GS's well-known $ER{\beta}$-mediated protective action in breast cancer.

• Korean Journal of Materials Research
• /
• v.11 no.1
• /
• pp.44-47
• /
• 2001

Effects of $Er_2O_3$ addition on the dielectric properties of non-reducible $BaTi_3$-based X7R dielectrics with Ni electrode have been studied in reducing atmosphere. X7R with moderate temperature-dependence was developed after addition of $Er_2O_3$ with $MnO_2-MgO$; room-temperature dielectric constant and dissipation factor were >2900 and < 1.0%, respectively. The addition of $Er_2O_3$ greater than 3.0 mol% improved the temperature dependence of dielectric properties, but a significant decrease of the dielectric constant at room-temperature was observed. The TCC curves rebated clockwise with increasing MnO$_2$ content at a given additive system, 1.5 mol% $Er_2O_3$ and 2.0 mol% MgO.