• Elastomers and Composites
• /
• v.36 no.3
• /
• pp.169-176
• /
• 2001

Ethyl-branched polyethylene[PE(2)] containing 2mole% ethyl branch and three ethylene-propylene rubbers(EPR's) haying the same ethylene(E)-propylene(P) molar ratio(E/P=50/50) with different stereoregularity, that is, random EPR(r-EPR), alternating-EPR(alt-FPR) and isotactic-alternating-EPR(iso-alt-EPR) were mixed for the investigation of their properties depending on the stereoregurarity. The three blends were immiscible at room temperature, and showed the simple additivity effect in density behavior. The melting point depression with blend composition increased in order of PE(2)/r-EPR>PE(2)/alt-EPR>PE(2)/iso-alt-EPR. In the tensile test, this blend systems have the lowest value or the breaking strength at FE(2) fraction of 0.5. This phenomenon results from the greastest separated phase morphology at this blend composition.

• Macromolecular Research
• /
• v.15 no.4
• /
• pp.343-347
• /
• 2007

Novel composite membranes, which delivered high separation performance for propylene/propane mixtures, were developed by coating inert poly(ethylene-co-propylene) rubber (EPR) onto a porous polyester substrate, followed by the physical distribution of $AgBF_4$. Scanning electron microscopy-wavelength dispersive spectrometer (SEM-WDS) revealed that silver salts were uniformly distributed in the EPR layer. The physical dispersion of the silver salts in the inert polymer matrix, without specific interaction, was characterized by FT-IR and FT-Raman spectroscopy. The high separation performance was presumed to stem from the in-situ dissolution of crystalline silver ionic aggregates into free silver ions, which acted as an active propylene carrier within a propylene environment, leading to facilitated propylene transport through the membranes. The membranes were functional at all silver loading levels, exhibiting an unusually low threshold carrier concentration (less than 0.06 of silver weight fraction). The separation properties of these membranes, i.e. the mixed gas selectivity of propylene/propane ${\sim}55$ and mixed gas permeance ${\sim}7$ GPU, were stable for several days.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.3C no.2
• /
• pp.48-54
• /
• 2003

To evaluate the radiation degradation of ethylene propylene rubber (EPR), radiation effects on EPR were investigated by using dielectric analysis and thermal-gravimetric analysis. Permittivity, loss factor, tan$\delta$, and thermal decomposition temperature were observed for ${\gamma}$-ray irradiated EPR. As the radiation dose was increased, the peak temperature of the loss factor and tans of EPR were increased and loss factor and tan$\delta$ at peak temperature were decreased. Activation energies were calculated using loss factor and thermal decomposition for ${\gamma}$-ray irradiated EPR as well. The trends of both calculated activation energies showed the same tendencies as radiation dose was increased.

• Journal of Adhesion and Interface
• /
• v.2 no.4
• /
• pp.24-31
• /
• 2001

Polypropylenes(PP) with different melt index values were mixed with ethylene-propylene rubber(EPR) or ethylene-propylene diene monomer rubber(EPDM) and an ethylene copolymer containing carboxylic acid group in a twin screw extruder. Then test specimens were prepared from the pellets of the blends with an injection molding machine. The mechanical properties and morphology of fractured surfaces were measured. Relative peak intensities of carboxylic acid group on the specimen surface were measured with an attennuated total reflection infrared spectrometer (ATR-IR) and compared with each other. The blend specimens were found to have the gradient morphology of rubber domains in PP matrix in the core region and PP skin layer. The blends containing PP of higher melt index showed greater content of ethylene copolymer containing carboxylic acid on the surface when the relative peak intensities of ATR-IR for carboxylic acid were compared. As the melt index values were increased, the decrease tendency in mechanical propeties such as tensile strength and impact strength was more significant for PP/EPR blends than PP/EPDM blends.

• Journal of Radiation Industry
• /
• v.5 no.3
• /
• pp.237-242
• /
• 2011

In this research, the radiation resistance of ethylene propylene rubber (EPR) and chlorosulfonated polyethylene (CSPE) which can be used as a insulating materials of for electrical cable in the nuclear power plant were investigated. EPR and CSPE were irradiated by ${\gamma}$-ray at various doses ranging from 50 to 500 kGy at room temperature in air. The irradiated EPR and CSPE was investigated in terms of activation energy, mechanical properties, and oxidation stability. The experimental results revealed that CSPE exhibited the higher radiation resistance in comparison to that of EPR.

• Elastomers and Composites
• /
• v.37 no.2
• /
• pp.79-85
• /
• 2002

Ethyl-branched polyethylene [PE(2)] containing 2mole% ethyl branch and three ethylene-propylene rubbers (EPR's) having the same ethylene(E)-propylene(P) molar ratio(E/P=50/50) with different stereoregularity, that is, random EPR (r-EPR), alternating-EPR (alt-EPR) and isotactic-alternating-EPR (iso-alt-EPR) were mixed for the investigation or their properties depending on the stereoregularity. Crystallinity of the prepared blends decreased with increasing content of amorphous EPR because of a decrease in both the degree of annealing and kinetics of diffusion of the crystallizable polymer content. With blend composition, crystallinity was reduced with the stereoregularity in EPR. The thermodynamic interaction parameter(x) for the three blend systems approximately equals to zero near the melting point. These systems were determined to be miscible on a molecular scale near or above the crystalline melting point or the crystalline PE(2). From the measurement of $T_m$ vs. $T_c$, the behavior of PE(2) is mainly due to a diluent effect of EPR component. The spherulite size measured by small angle light scattering (SALS) technique depended upon blend composition, and stereoregularity of EPR. The size of spherulite was enlarged with the content of rubbery EPR and the decrease of stereoregularity in EPR.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.7
• /
• pp.679-685
• /
• 2008

This paper describes the degraded properties of between the charge and discharge current for ${\gamma}$-ray irradiated in electric power cable rubbers using in nuclear power generating station. The charge and discharge current of degradation in EPR(Ethylene Propylene Rubber), which were irradiated with the radiant capacity of 0.033 Mrad/h, have been measured in order to investigate the influence of the atmosphere(in amount of reinforcing agent, moisture absorption and heat treatment) on electrical properties. When ${\gamma}$-ray were irradiated on the EPR with more reinforcing agent from 4 to 40 Phr, charge and discharge currents was increase due to the amount of reinforcing agent. It was verified that the discharging and charging currents irradiated by ${\gamma}$-ray were higher than those that was not irradiated. The amount of the degraded current was more after moisture absorption than before moisture absorption. The charge and discharge current after heat treatment was similar to that of before heat treatment and it was decreased with the time elapsed. As these properties related with ${\gamma}$-ray irradiation dose, it is suggested that these properties can be utilized as a index of irradiation degradation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.132-135
• /
• 2000

This paper present the results of measured Thermally Stimulated Current of EPR(Ethylene Propylene Rubber) sheet material with variation of bias temperature range of -35~80[$^{\circ}C$], the quality of the material of electrode, condition. The origins of these peaks are that, low temperature peak seems to result from dipole, and high temperature peak from the orientation electronic trap.

• The Korean Journal of Rheology
• /
• v.5 no.2
• /
• pp.144-148
• /
• 1993

Nylon-6의 내충격성을 개선하기 위한 개질제로써 에틸렌-프로필렌 고무(EPR)와 에 틸렌-아크릴 에스터-무수말레산 공중합체(EAM)를 첨가한 nylon-6/EPR/EAM 블렌드 시스 템의 유변학적 특성을 24$0^{\circ}C$에서 조사하였다. 개질제중 EAM의 점도는 조성물 가운데 가장 낮음에도 불구하고 첨가량을 증가함에 따라 블렌드의 점도는 증가하였다. 또한 EPR(I)의 점 도가 EPR(II)의 점도보다 낮지만 EAM 함량이 증가함에 따라 nylon-6/EPR(I)/EAM의 점도 는 nylon-6/EPR(II)/EAM의 점도보다 높아지는 현상이 관찰되었다. 이러한 특성을 분산상의 morphology 변화와 전단력하에서 변형이 어려워지기 때문인 것으로 해석하였다.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.10 no.1
• /
• pp.37-46
• /
• 2004

The aim of this study was to develop the recycling methode of alloyed recycling plastics. The compatibilizers have been used to improve the physical properties of recycling plastics. Eethylene propylene rubber(EPR), ethylene propylene diene monomer(EPDM), styrene ethylene butylene styrene block copolymer(SEBS), maleic anhydride modified styrene ethylene butylene styrene block copolymer(SEBS-MA) and styrene butadiene styrene block copolymer(SBS) were singled out as compatibilizers. In this study, the physical properties such as impact and tensile strength have improved above 20% by using the compatibilizers.