• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.11
• /
• pp.5372-5378
• /
• 2012

In this paper, we propose a new method to quickly deinterleave the stagger PRI signals and D&S(Dwell and Switch) PRI signals from the EP radar using the electronic warfare system. While former algorithms were based on stochastic methods only using the first deviation of the TOA of radar signals, this paper uses the first and the second deviation of the TOA of radar signals to deinterleave multiple PRIs of EP radars. When we simulate multiple PRIs of EP radars and test the simulated radar signals using the proposed algorithm, various PRI signals such as fixed, jitter, D&S and stagger PRI are well deinterleaved in a short time. This algorithm is found to be very useful for electronic warfare systems.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2003.11a
• /
• pp.139-148
• /
• 2003

In this study, biodegradable base Li-greases were prepared by using Li-soap thickener and vegetable oils such as soybean oil, rapeseed oil, castor oil and synthetic ester. Also, EP-greases were formulated by blending base Li-greases, anti-wear additives, EP additives, anti-oxidants and corrosion inhibitor etc. And EP-greases were characterized by analysing physical properties such as worked penetration, dropping point, 4-ball wear, extreme pressure, thermal properties etc. Biodegradability of base Li-greases and EP-greases were evaluated by CEC-L-33-A-93 method using several inoculums of domestic sewage treatment plant. As the results, biodegradability of vegetable oils were shown at the range of 97.1 to $98.4\%$. And biodegradability of base Li-greases and EP-greases were $86.2\%\;\~\;89.3\%\;and\;83.4\%\;\~\;90.0\%$ which were lower value than those o( vegetable oils due to effect of Li-soap thickener, respectively. Therefore, the EP-greases prepared in this study were easily biodegraded by microorgnism.

• Journal of Nutrition and Health
• /
• v.36 no.8
• /
• pp.793-800
• /
• 2003

This study was conducted to investigate the antioxidative effects of Paeonia lactiflora (PL) seeds on antioxidative defense system and lipid peroxidation of liver in rats fed high-cholesterol diet. Sprague-Dawley male rats weighing 100 $\pm$10g were randomly assigned into five experimental groups fed 0.5% cholesterol ; HC group which was not supplemented PL seeds extract, 0.1% methanol extract diet group (MP1 group), 0.2% methanol extract diet group (MP2 group), 0.05% ether-souble fraction diet group (EP1 group) and 0.1 % ether-souble fraction diet group (EP2 group). Experimental diets were fed ad libitum to the rats for 3 weeks. The activity of hepatic superoxide dismutase (SOD) was not significantly different among all the high cholesterol diet groups. The hepatic glutathione peroxidase (GSHpx) activity in MP2 group was increased to 27% compared to HC group. The activity of hepatic catalase (CAT) was not significantly different among the all high cholesterol diet groups. The hepatic glutathione S-transferase (GST) activity in the EP1 and EP2 groups were increased to 12% and 13%, respectively, as compared to HC group. The levels of hepatic TBARS in the MP1, MP2, EP1 and EP2 groups were reduced by 18%, 21%, 20% and 23%, respectively, as compared with HC group. The contents of lipofuscin in liver was not significantly different among all the experimental groups. The results indicated that PL seeds extract may be reduced oxidative damage by activating antioxidative defense system of hepatic in rats fed high-cholesterol diets. (Korean J Nutrition 36(8): 793∼800, 2003)

• Molecules and Cells
• /
• v.25 no.1
• /
• pp.30-42
• /
• 2008

The disease-specific (dsp) region and the hypersensitive response and pathogenicity (hrp) genes, including the hrpW, $hrpN_{Ep}$, and hrpC operons have previously been sequenced in Erwinia pyrifoliae WT3 [Shrestha et al. (2005a)]. In this study, the remaining hrp genes, including the hrpC, hrpA, hrpS, hrpXY, hrpL and hrpJ operons, were determined. The hrp genes cluster (ca. 38 kb) was comprised of eight transcriptional units and contained nine hrc (hrp conserved) genes. The genetic organization of the hrp/hrc genes and their orientation for the transcriptions were also similar to and collinear with those of E. amylovora, showing ${\geq}80%$ homologies. However, ORFU1 and ORFU2 of unknown functions, present between the hrpA and hrpS operons of E. amylovora, were absent in E. pyrifoliae. To determine the HR active domains, several proteins were prepared from truncated fragments of the N-terminal and the C-terminal regions of $HrpN_{Ep}$ protein of E. pyrifoliae. The proteins prepared from the N-terminal region elicited HR, but not from those of the C-terminal region indicating that HR active domains are located in only N-terminal region of the $HrpN_{Ep}$ protein. Two synthetic oligopeptides produced HR on tobacco confirming presence of two HR active domains in the $HrpN_{Ep}$. The HR positive N-terminal fragment ($HN{\Delta}C187$) was further narrowed down by deleting C-terminal amino acids and internal amino acids to investigate whether amino acid insertion region have role in faster and stronger HR activity in $HrpN_{Ep}$ than $HrpN_{Ea}$. The $HrpN_{Ep}$ mutant proteins $HN{\Delta}C187$ (D1AIR), $HN{\Delta}C187$ (D2AIR) and $HN{\Delta}C187$ (DM41) retained similar HR activation to that of wild-type $HrpN_{Ep}$. However, the $HrpN_{Ep}$ mutant protein $HN{\Delta}C187$ (D3AIR) lacking third amino acid insertion region (102 to 113 aa) reduced HR when compared to that of wild-type $HrpN_{Ep}$. Reduction in HR elicitation could not be observed when single amino acids at different positions were substituted at third amino acids insertion region. But, substitution of amino acids at L103R, L106K and L110R showed reduction in HR activity on tobacco suggesting their importance in activation of HR faster in the $HrpN_{Ep}$ although it requires further detailed analysis.

• Membrane Journal
• /
• v.26 no.3
• /
• pp.197-204
• /
• 2016

The objective of this work was to investigate the performance of pervaporation process for recovery of ester compounds from model aqueous solutions and how the fluxes of esters and water were affected by changes in feed concentration and temperature. The flux of ethyl acetate (EA), propyl acetate (PA), ethyl propionate (EP), butyl acetate (BA), and ethyl butyrate (EB) increased with an increase in feed concentration from 0.15 wt% to 0.60 wt%, and increased with temperature change from $30^{\circ}C$ to $50^{\circ}C$. The flux of esters (EA, PA, EP, BA, and EB) was in order of (EA) < (PA, EP) < (BA, EB). This result meant that the flux strongly depended on affinity between esters and membrane surface; EA is the least hydrophobic because it has one hydrophobic function group ($-CH_2-$), (PA, EP) have two ($-CH_2-$), and (BA, EB) are the most hydrophobic because these have three ($-CH_2-$). As well as such an influence of hydrophobicity of ester molecules on ester flux, the influence of hydrophobicity of membrane surface on ester flux needs further investigation. With increase in temperature, water flux of aqueous EA, PA, EP, BA, and EB solution increased. However, water flux of aqueous ester solutions did not change appreciably with increase in concentration. This experimental results may be used as fundamental data for pervaporation (PV) to improve the aroma recovery process as an alternative to thermal evaporation and distillation processes.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.15 no.2
• /
• pp.171-174
• /
• 2007

Sericin beads were prepared from ethanol-precipitated sericin. The addition of ethanol into hot-water extracted sericin solution induced precipitation of sericin and thereby some sericin could be fractionated. The ethanol-precipitated sericin (EpSS) had narrower molecular weight distribution than original sericin. The EpSS had mainly random coil structure with small portion of ${\beta}-sheet$ structure. With the EpSS, spherical beads could be prepared at lower concentration than with original sericin due to higher viscosity. The EpSS beads had better compressive strength than the original sericin beads and had rubber-like property. Our results suggest that EpSS is more compatible in the polymeric field, since it has better mechanical strength than original sericin.

• Journal of Embryo Transfer
• /
• v.16 no.1
• /
• pp.1-5
• /
• 2001

A total of 92 unfertilized human oocytes were treated with ethanol (EtOH), calcium ionophore A23187 (CI) or electric pulse (EP) for activating pronuclear formation and subsequent development. In Experiment 1, there was a significant (P=0.0001) treatment effect on the activation of unfertilized oocytes. No spontaneous activation was occurred in the control, but activation treatments induced PN formation with various efficacy. More unfertilized oocytes (UFOs) were activated after EtOH or EP treatment than after CI treatment. EP was as effective (63.6 %) as EtOH, but fragmentation was observed in 43% of UFOs activated by EP. Proportion of UFOs that formed presumptive haploid PN (2 PNs+1 PB or 1 PN +2 PBs) was 33.3, 0 and 28.6% after EtOH, CI and EP treatments, respectively. In Experiment 2, a significant (P=0.0362) effect of immature oocytes (IOs) status on activation was fecund. IOs at the GVBD-MI oocytes had higher potential to form PN than those at the GV stage or with abnormal morphology (25 vs. 77.8%). The results of this study clearly demonstrated that the treatment of 10% ethanol for 5 min effectively induced the activation of UFOs. IOs could form pronucleus with high efficacy by ethanol treatment, as long as they grew beyond the GVBD stage.

• Journal of Korean Society of Steel Construction
• /
• v.11 no.2 s.39
• /
• pp.109-116
• /
• 1999

This paper presents an experimental study on the behavior of CFT Column to H-Beam Endplate Connections with penetrated H/T bolts under monotonic loading. The object of this study is to estimate accurately the effect about the thickness of endplate and the arrangement of H/T bolts which was not got a grip on the results reported in the previous paper. Main parameters are the thickness of endplates (12mm, 16mm) and the arrangemement of H/T bolts (EP1, EP2, EP3 Type). The experimental results compared and analysed. 1) The specimens were classified by Bjorhovde's and EC3's method. 2) A formula to predict the ultimate moment of connection was derived based on the T-stub model, and theoretical value $(_tM_u)$ computed by the formula corresponded to the experimental value $(_eM_u)$.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.46 no.6
• /
• pp.777-784
• /
• 2013

This study compared the effects of diets consisting of experimental extruded pellets (EP), commercial soft extruded pellets (SEP), and raw-fish-based moist pellets (MP) on the growth, flesh quality, and histology of the Korean rockfish Sebastes schlegeli. Three replicated groups of 60 fish each (initial mean weight 152 g) were fed one of two experimental EPs (EP1 and EP2), two commercial SEPs (SEP1 and SEP2), or MP for 11 weeks. The survival, weight gain, and final mean weight of the fish did not differ significantly among the groups. The highest feed efficiency was in fish fed MP (P<0.05), and the protein efficiency ratio of fish fed MP was significantly higher than that of fish fed EP1, EP2, or SEP1, but not significantly different from that of fish fed EP2. The daily feed intake of the fish fed the EPs and SEPs was significantly higher than that of the fish fed MP (P<0.05). The condition factor, Hepatosomatic Index, and Viscerasomatic Index of the fish did not differ significantly among the groups. No notable differences in the textural properties of the dorsal muscle, plasma biochemical parameters, or histological features of the fish were observed in fish fed any diet. This suggests that extruded pellets can be used to feed growing Korean rockfish without compromising growth, flesh quality, or histopathological change in comparison to raw fish-based moist pellets.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.4
• /
• pp.1225-1231
• /
• 2013

A novel class of hyperbranched polyesters, HPpEP and HPmEP, were prepared via a facile one-pot polymerization of a phloroglucinol (as a $B_3$ monomer) with a phthaloyl dichloride (as an $A_2$ monomer) for replacing a problematic BPA developer in thermal printing system. The resulting polymers, HPpEP and HPmEP, had highly branched structures and met well the requirements for high performance developer materials such as colorlessness, easy and inexpensive synthesis, high thermal stability, etc. In addition, these polymers exhibited an efficient reaction with leuco dyes (ODB-2) for a coloring process by releasing protons from linear and terminal phenol groups of polymers when heated.