• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.1
• /
• pp.70-79
• /
• 2016

Satrec Initiative successfully developed a high-resolution electro-optical camera system, EOS-D Ver.1.0. EOS-D Ver.1.0 is the main payload of DubaiSat-2 and Deimos-2, which are developed based on the SI-300 platform of Satrec Initiative. After the launch and early operation (LEOP) of DubaiSat-2 and Deimos-2, we performed refocusing for the telescope of EOS-D Ver.1.0 to compensate for the dimensional change of its metering structure by moisture out-gassing. Before and after refocusing, we conducted the performance evaluation of thermal control system(TCS) for EOS-D Ver.1.0 using the in-orbit telemetry data. The evaluation showed EOS-D Ver.1.0 was under well-controlled thermal environment, which demonstrates TCS was designed and developed to meet all requirements.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.11
• /
• pp.921-930
• /
• 2013

Satrec Initiative successfully developed and verified a high-resolution electro-optical camera system, EOS-D Ver.1.0. We designed this system to give improved spatial and radiometric resolution compared with EOS-C series systems. The thermal control subsystem (TCS) of the EOS-D Ver.1.0 uses heaters to meet the opto-mechanical requirements during in-orbit operation and uses different thermal coatings and multi-layer insulation (MLI) blankets to minimize the heater power consumption. Also, we designed and verified a refocusing mechanism to compensate the misalignment caused by moisture desorption from the metering structure. We verified the design margin and workmanship by conducting the qualification level thermal vacuum test. We also performed the verification of thermal math model (TMM) by comparing with thermal balance test results. As a result, we concluded that it faithfully represents the thermal characteristics of the EOS-D Ver.1.0.

• Archives of Pharmacal Research
• /
• v.28 no.7
• /
• pp.770-774
• /
• 2005

This study investigated the stimulative or sedative effects of inhaling fragrant essential oils (EOs) by using a forced swimming test (FST) with mice. This behavioral test is commonly used to measure the effects of antidepressant drugs. The inhalation by mice of EOs, such as ginger oil (p<0.05), thyme oil (p<0.05), peppermint oil (p<0.05), and cypress oil (p<0.01) resulted in 5% to 22% reduction of immobility. The same results were achieved when over-agitation was artificially induced in the mice by an intraperitoneal injection of caffeine (a psycho-stimulant). In contrast, inhalation of some EOs by the mice resulted in increased immobility. To evaluate more correctly the sedative effects of EOs, the immobility of over-agitated mice induced with caffeine was ascertained after the inhalation of various EOs. Inhalation of lavender oil (p<0.01) and hyssop oil (p<0.01) increased the immobile state in mice that were treated with caffeine. The results of this study indicate that the inhalation of essential oils may induce stimulative or sedative effects in mice.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.3
• /
• pp.394-400
• /
• 2004

To investigate the efficacy of alternatives to antibiotics, the present study was conducted to compare the effects of antibiotic, lactic acid, a blend of commercial essential oils (EOs) and EOs in combination with lactic acid on growth performance and the functional activity of the gut in broiler chickens. A total of 168 broiler chickens were given the basal diet supplemented with 10 ppm colistin (T1), 0.1% lactic acid (T2), 25 ppm EOs (T3), 25 ppm EOs+0.1% lactic acid (T4), 50 ppm EOs (T5) or 50 ppm EOs+0.1% lactic acid (T6) in the period 3 to 35 days of age. As a result, the broiler chickens assigned to T4 group throughout the experimental period had apparently (p<0.05) greater body weight and total gain than these assigned to T1, T2, T3 and T5 groups. However, there was no difference in growth performance among the birds fed the diets supplemented with antibiotic (T1), lactic acid (T2) and EOs (T3 and T5) alone. The weights of digestive organs and the number of lactobacilli and E. coli in the lower ileum were not affected by dietary treatments. Total trypsin activity was significantly (p<0.05) greater in T4 than T1, T2, T3 and T5 groups. Total and specific pancreatic $\alpha$-amylase activities were significantly (p<0.05) enhanced in the broiler chickens fed T4 diet compared with these fed T1, T2 and T3 diets. However, there were no differences in growth performance and digestive enzyme activities including pancreatic trypsin and $\alpha$-amylase between T4 and T6 groups fed the diets supplemented with either low or high EOs levels in combination of lactic acid. In conclusion, a blend of commercial EOs combined with lactic acid showed significant increases in digestive enzyme activities of the pancreas and intestinal mucosa, leading to increase in growth performance.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.1
• /
• pp.48-54
• /
• 2023

In this research, The basic physical properties and EMP shielding performance by thickness were evaluated for optimum composition of EMP shield concrete that can be applied on-site by mixing carbon-based materials with high conductivity into concrete that uses electric furnace oxidized slag (EOS). As a result of the evaluation, it was confirmed that the slump decreased as the amount of mixed carbon fib er (CF) increased, and increased when milled carb on (MCF) was mixed. As for the compressive strength, it was confirmed that EOS enhanced the strength compared to NA, and it was confirmed that the strength decreased when CF and MCF were mixed. As the thickness of the EMP shielding measurement increases, the shielding rate increases, and it was confirmed that the type of conductive material and the thickness of the test specimen have a greater influence on the shielding rate than the Amount of conductive material added. As a result of a comparative evaluation, EOS CF 0.2 is considered suitable for EMP shield concrete formulation.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.3
• /
• pp.114-123
• /
• 2020

PURPOSE. The aim of this study was to evaluate the corrosion resistance of the specimens produced by five different commercial metal laser sintering (MLS) systems with their recommended Co-Cr alloy powders. MATERIALS AND METHODS. The MLS machines and the alloy powders used were, ProX 100-ST2724G (St-Pro), Mysint 100-EOS SP2 (SP2-Mys), EOSINT 270-EOS SP2 (SP2-EOS), SLM 100-Starbond CoS (SB-SLM), and MLab Cusing-Remanium^® Star (RS-MLab), respectively. Eight specimens from each group were prepared. Open circuit potential (E_ocp) and electrochemical impedance spectroscopy (EIS) measurements of polished surfaces of the specimens were conducted in a three-electrode cell using a potentiostat-galvanostat in Fusayama-Meyer artificial saliva (AS). Specimens from each group were immersed in AS and de-ionized water for seven days. E_ocp, charge transfer resistance (R_ct) values, and released ions (㎍/㎠ × 7d) in different solutions were determined. The specimen surfaces were observed with SEM/EDS. Results were analyzed statistically. RESULTS. E_ocp values have shifted to potentials that are more positive over time. Steady-state E_ocp values were from high to low as follows, SB-SLM, SP2-Mys, SP2-EOS, RS-MLab, and ST-Pro, respectively. After 60 mins, RS-MLab specimens had the highest R_ct value, followed by SP2-Mys, SB-SLM, SP2-EOS, and ST-Pro. In all groups, ion release was higher in AS than that in de-ionized water. CONCLUSION. There were small differences among the corrosion resistances of the Co-Cr alloy specimens produced with MLS systems; meanwhile, the corrosion resistances were quite high for all specimens.

• The Journal of the Korea Contents Association
• /
• v.12 no.5
• /
• pp.81-90
• /
• 2012

Since the Canon EOS 5D Mark II with which the Full HD video shooting is possible was launched in 2008, the utilization of the DSLR cameras has been increasing in the video production field. In this thesis, the shortages and advantages of the video functions that the 5D Mark II cameras have will be analysed and they will be compared with the RED cameras that are most widely used in the video production field today. Through this, the utilization of the DSLR camera in the film production field will be investigated. The DSLR camera has the advantage of having good clear picture since it uses the image sensor of big size, and of being able to utilize the various lenses of good quality, and is small in size and light in weight compared to the conventional HD cameras. Although, there are some limitations that there are parts to be improved such as the sound recording problems and development of various additional equipments, the excellent usage that the DLSR cameras have is presenting a new possibility for the film production.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.5D
• /
• pp.869-876
• /
• 2006

In the case of earthenware cultural heritages that are found in the form of fragments, the major task is quick and precise restoration. The existing method, which follows the rule of trial and error, is not only greatly time consuming but also lacked precision. If this job could be done by three dimensional scanning, matching up pieces could be done with remarkable efficiency. In this study, the original earthenware was modeled through three-dimensional pattern scanning and photogrammetry, and each of the fragments were scanned and modeled. In order to obtain images from the photogrammetry, we calibrated and used a Canon EOS 1DS real size camera. We analyzed the relationship among the sections of the formed model, efficiently compounded them, and analyzed the errors through residual and color error map. Also, we built a web-based three-dimensional simulation environment centering around the users, for the virtual museum.

• International Journal of Aerospace System Engineering
• /
• v.3 no.1
• /
• pp.30-38
• /
• 2016

The The turbulent mixing characteristics of Kerosene-LOx in a coaxial swirl injector 100 bar have been numerically investigated. Turbulent model is based on large eddy simulation with real-fluid transport and thermodynamics. The effects of equation of state (EOS), chamber pressure are evaluated in a point of the mixing efficiency and pressure fluctuations. The dominant frequency is same as the hairpin vortex shedding frequency generated by film wave at the LOx post.

• Korean Chemical Engineering Research
• /
• v.47 no.5
• /
• pp.599-607
• /
• 2009

This study was conducted to derive the five correlations which could predict specific gravity(or heating value), compression factor, density, etc., if we know heating value or specific gravity only. To make a sufficient number of raw data for regression, SGERG EOS was modified into equation of heating value. Based on these raw data, five correlations were obtained and the uncertainties of the correlations were evaluated. The results showed that the uncertainties were near 0.1% in most conditions of natural gas and so the correlations could be used in natural gas industry and academic fields.