• Journal of computational fluids engineering
• /
• v.11 no.3 s.34
• /
• pp.8-13
• /
• 2006

The north panel of a geostationary satellite is used as one of the main radiators, on which communication equipment or bus equipment are installed. The thermal control of panel is designed by using embedded heat pipes and surface heat pipes (or external heat pipes) to spread out heat dissipated from equipment all over the radiator evenly and finally to reject the heat to the space through the radiator efficiently. This panel is also divided by several areas based on the operating temperature and dissipation of equipment in order to increase heat rejection capability of radiator. The thermal analysis is carried out for the hot case, Winter Solsitce EOL (End Of Life), in order to validate thermal design of the panel utilized 6 surface heat pipes and 8 embedded heat pipes. The sensitivity studies for the heat pipe failure case and no heat pipe case are performed and compared to its normal state. The heat transport capability of heat pipe is also obtained from these calculations.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.28.1-28.1
• /
• 2011

We deposited the carbon films on Ni substrates by thermal atomic layer deposition (th-ALD), for the first time, using carbon tetrabromide ($CBr_4$) precursors and H2 reactants at two different temperatures (573 K and 673 K). Morphology of carbon films was characterized by scanning electron microscopy (SEM). The carbon films having amorphous carbon structures were analyzed by X-ray photoemission spectroscopy (XPS) and Raman spectroscopy. As the working temperature was increased from 573 K to 673 K, the intensity of C1s spectra was increased while that of O1s core spectra was reduced. That is, the purity of carbon films containing bromine (Br) atoms was increased. Also, the thin amorphous carbon films (ALD 3 cycle) were transformed to multilayer graphene segregated on Ni layer, through the post-annealing and cooling process.

• Bulletin of the Korean Space Science Society
• /
• 2011.04a
• /
• pp.26.1-26.1
• /
• 2011

위성 편대비행 시스템에서 궤도 및 자세의 결정과 제어를 동시에 시뮬레이션 할 수 있는 통합 시스템을 설계하고 개발하였다. 실제 위성에서는 궤도 제어가 수행되는 동안 자세는 계속 변한다. 그러므로 임무수행을 위해 편대위성들의 자세를 동기화하기 위해서는 편대위성들의 자세 결정과 제어가 필요하다. 이와 같이 실제와 같은 시뮬레이션을 위해서, 궤도 및 자세의 결정과 제어를 동시에 수행할 수 있는 통합된 시뮬레이터 시스템이 필요하다. 통합 시뮬레이터 시스템의 개발은 기존에 연세대학교에서 개발한 GPS 시뮬레이터를 이용한 편대비행 테스트베드와 하드웨어 자세 시뮬레이터를 각각 보완한 후 통합하는 방법으로 수행하였다. 이 두 시스템은 서로 독립적으로 개발되었기 때문에 통합을 위하여 하드웨어 인터페이스와 소프트웨어 인터페이스 부분으로 나누어 설계와 개발을 수행하고, 최종적으로 결합하는 절차로 통합을 완료하였다. 마지막으로 개발된 통합 시뮬레이터 시스템과 통합 시나리오를 사용하여 궤도와 자세를 동시에 시뮬레이션 하고, 이를 통해 개발된 통합 시스템을 검증하였다. 이 연구를 통해 개발된 궤도와 자세가 통합된 하드웨어 시뮬레이터 시스템은 실제 위성에 가까운 시뮬레이션을 수행할 수 있을 뿐만 아니라 하드웨어와 소프트웨어 인터페이스에 대한 검증이 가능하고 실제의 하드웨어 특성으로부터 생기는 에러를 고려하여 알고리즘의 실제 성능을 평가할 수 있다.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2005.05a
• /
• pp.938-946
• /
• 2005

We study the firm's strategy to price its products and plan the spare parts manufacturing so as to maximize its profit and at the same time to fulfill its commitment to providing the customers with the key parts continuously over the relevant decision time horizon, i.e., the production plus warrantee period. To examine the research question, we developed and solved a two-stage optimal control theory model. Our analysis suggests that if the cost to produce the spare part during the warrantee period is more expensive than that during the production period, the firm should increase its sales price gradually throughout the production period to control its sales. In addition, during the production period it is optimal for the firm to produce the spare parts more than needed so that the overproduced spare parts can be used to partially meet the demand during the warrantee period. We conducted numerical analysis to investigate the sensitivity dynamics among key variables and parameters such as inventory holding cost, unit spare part production costs, part failure rate, and parameters in the demand function.

• Solar Energy
• /
• v.17 no.2
• /
• pp.23-33
• /
• 1997

This paper reviews the advanced solar cell structures used in space. These are the structures which incorporate the back surface field and reflectors with very shallow and lightly doped emitters. Their use in space has shown that the thinner cells are more resistive to radiation damage than the thicker ones. It has been found that the charged particles affect both the surface and bulk of the cells used in space. This causes degradation in the output power, which in effect, can be explained by the degrading diffusion length of the cells. The PERL cells showed higher BOL(beginning of life) efficiency and almost the same EOL(end of life) efficiency as structures with wrap-around contact configuration fabricated on 10 ${\Omega}cm$ resistivity substrates. This observation lead to a conclusion that, the space cells do not necessarily need to have very high BOL efficiency except in specific missions which require such.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1015-1019
• /
• 2007

The necessity of diagnosis of the rotating machinery which is widely used in the industry is increasing. Because vibration diagnosis can avoid sudden breakdown of machine and reduce the maintenance costs. In chemical factory, Air-compressor and refrigerator which can affect the performance and capacity of output is important machine. Therefore, in this paper, the vibration of reassembled air-compressor and refrigerator after explosion is measured for checking the machine condition. The result of diagnosis and solution is discussed in this paper.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.7
• /
• pp.1-5
• /
• 2007

This paper presents the new detection method for the end of life on fluorescent lamps. At the end of lamp life, the lamp voltage and current asymmetrically increase and decrease more than normal state. If the ballast system does not have the protection function especially for T4 and T5 lamps, we may see the melting socket which is connected to the end of the lamp. To protect from this kind of abnormal status is the most important thing in the ballast system that has very old lamps.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1535-1538
• /
• 2008

Carbon nanotube arrays were fabricated using micro molding in capillary (MIMIC) process. Patterns remained on the surface in the pattern complementary to that present in the mold. CNTs were selectively grown on the MIMIC patterned sites with a triode PECVD. And turn on field for $10\;{\mu}A/cm^2$ electron emission current was $2.2\;V/{\mu}m$ turn on field.

• Korean Journal of Ichthyology
• /
• v.18 no.2
• /
• pp.148-150
• /
• 2006

Two specimens of Apogon cookii of the family Apogonidae were collected from the coastal waters of Dokdo, Korea, and described as the first record from Korea. Specimens were caught by SCUBA diving using scoop net (length 33 cm, depth 63 cm) on October, 1997. The species differs from A. endekataenia in having 5 longitudinal stripes and a small black spot on the base of caudal fin. The new Korean name, "Da-seot-jul-eol-ge-bi-neul" as new Korean name of Apogon cookii.

• Journal of Sasang Constitutional Medicine
• /
• v.21 no.3
• /
• pp.193-201
• /
• 2009

1. Objectives: The purpose of this study is to evaluate the effects of Yangkyuksanhwa-tang which is based on sasang constitutional medicine for dermatitis as psoriasis, atopic dermatitis. 2. Methods: This two patients were treated by Soyangin's constitutional medications according to the result of sasang constitutional diagnosis. We evaluated the severity in dermatitis that two methods ; doctor's view and patient's subjective itching. 3. Results & Conclusoins: This cases study shows an efficent result of using Yangkyuksanhwa-tang in treatment of dermatitis as psoriasis, atopic dermatitis.