• Korean Journal of Geomatics
• /
• v.3 no.1
• /
• pp.53-57
• /
• 2003

As the Korea Multi-Purpose Satellite-I (KOMPSAT-1) satellite can roll tilt up to $\pm$45$^{\circ}$, we have analyzed some KOMPSAT-1 EOC images taken at different tilt angles for this study. The required ground coordinates for bundle adjustment and geometric accuracy are obtained from the digital map produced by the National Geography Institution, at a scale of 1:5,000. Followings are the steps taken for the tilting angle of KOMPSAT-1 to be present in the evaluation of geometric accuracy of each different stereo image data: Firstly, as the tilting angle is different in each image, the characteristic of satellite dynamic must be determined by the sensor modeling. Then the best sensor modeling equation should be determined. The result of this research, the difference between the RMSE values of individual stereo images is mainly due to quality of image and ground coordinates instead of tilt angle. The bundle adjustment using three KOMPSAT-1 stereo pairs, first degree of polynomials for modeling the satellite position, were sufficient.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.518-521
• /
• 2004

Change detection is one of the common research topics in remote sensing. In general, global change detection methods using image difference method, etc, are used in low resolution images and local change detection methods using floating windows, etc, are used in high resolution images. But, these methods have disadvantages in practical use. If changed area images are automatically produced, these images will be used in public area such as regional planning, regional development managements. In this research, we developed new change detection method applicable KOMPSAT EOC images. This method automatically produces subset images in changed area.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.515-517
• /
• 2004

Although sustainable development of a city should in theory be based on updated spatial information like land cover/use changes, in practice there are no effective tools to get such information. However the development of satellite and sensor technologies has increased the supply of high resolution satellite data, allowing cost-effective, multi-temporal monitoring. Especially KOMPSAT-1(KOrea Multi-Purpose SATellite) acquired a large number of images of the whole Korean peninsula and covering some large cities a number of times. In this study land-use patterns and trends of Daejeon from the year 2000 to the year 2003 will be considered using land use maps which are generated by manual interpretation of multi-temporal KOMPSAT EOC imagery and to show the possibility of using high resolution satellite remote sensing data for urban analysis.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.2
• /
• pp.1057-1060
• /
• 2013

Recent investigations have confirmed up-regulation of serum miR-21 and its diagnostic and prognostic value in several human malignancies. In this study, we examined serum miR-21 levels in epithelial ovarian cancer (EOC) patients, and explored its association with clinicopathological factors and prognosis. The results showed significantly higher serum miR-21 levels in EOC patients than in healthy controls. In addition, increased serum miR-21 expression was correlated with advanced FIGO stage, high tumor grade, and shortened overall survival. These findings indicate that serum miR-21 may serve as a novel diagnostic and prognostic marker, and be used as a therapeutic target for the treatment of EOC.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.04a
• /
• pp.265-269
• /
• 2003

최근 인공위성 영상자료는 주기적인 획득 시기를 가지고 있고 수치 지형도에 비해 쉽게 인지할 수 있기 때문에 지형변화 모니터링 분야에서 활발하게 이용되고 있다 그러나 인공위성 영상자료들은 촬영조건 및 센서의 특성에 따라 다른 기하학적인 왜곡을 포함하고 있을 뿐만 아니라 공간, 방사 및 분광 해상도가 상이하기 때문에 정밀한 분석 결과 산출에 어려움이 있다. 즉, 두 개 이상의 영상을 비교 분석하기 위해 기본적인 센서 정보의 차이에서 발생하는 정오차를 소거하고 지형기복에 의해 발생하는 부정오차를 제거하기 위한 정밀 기하보정은 반드시 선행되어야 한다. 따라서, 본 연구에서는 공간해상도가 다르기 때문에 발생하는 정오차 및 부정오차를 제거하기 위해 정밀정합을 실시하였다. 정밀 정합된 kompsat EOC 및 Landsat TM 영상으로 토지피복 변화를 탐지함으로써 위치정확도가 높은 탐지결과를 얻을 수 있었다. 정확한 위치정보를 가지는 탐지 결과는 지형지물의 갱신이나 다양한 GIS 응용의 기본자료로서 사용할 수 있을 것으로 기대된다.

• Korean Journal of Remote Sensing
• /
• v.18 no.1
• /
• pp.25-33
• /
• 2002

In 1799, Korea has become a country that holds Earth observation satellite in orbit as they had succeeded in the launch of KOPMSAT-1, the first Korean Earth observation satellite for the practical purpose. For the wide application of the satellite imagery, various application techniques are required, and topographic mapping is essential technique for the application in various fields. Moreover, considering that the main mission of the KOMPSAT-1 is to provide the satellite imagery for the mapping of Korean peninsula, the topographic mapping using KOMPSAT-1 EOC imagery is very significant. In this paper, we showed the possibility of digital plotting using KOMPSAT-1 EOC stereo images to produce topographic map. For the purpose, we implemented experimental stereo plotting using digital photogrammetric workstation and analyzed the procedure. As a result of this paper, we showed that some elements consist in 1:25,000 scale map can be plotted from KOMPSAT-1 Stereo images.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2003.04a
• /
• pp.340-348
• /
• 2003

비접근지역이나 넓은 지역의 3차원 위치정보를 취득하기 위하여 본 연구에서는 KOMPSAT-1호 EOC 스트립 영상과 헤더자료를 이용한 3차원 기하모델링 기법을 개발하고 오차특성을 분석하였다. ECEF 좌표계로 제공되는 위성 헤더자료를 위성궤도 모델링에서 일반적으로 사용되는 ECI 좌표계로 모델링하는 경우와 ECEF 좌표계로 모델링하는 경우에 대해 비교 분석하고 단영상으로 제공되는 KOMPSAT-1호 EOC 영상을 스트립영상으로 재구성한 후 기준점 배치에 따른 오차보정기법을 제시하고 오차특성을 분석하였다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.10 s.241
• /
• pp.1156-1162
• /
• 2005

In this study, a noble method is proposed to prevent the edge overcoating (EOC) that may develop near the edge of the steel strip in the gas wiping process of continuous hot-dip galvanizing. In our past study (Trans. of the KSME (B), Vol. 27, No. 8, pp. $1105\~1113$), it was found that EOC is caused by the alternating vortices which are generated by the collision of two opposed jets in the region outside the steel strip. When the two opposed jets collide at an angle much less than $180^{o}$, non-alternating stable vortices are established symmetrically outside the steel strip, which lead to nearly uniform pressure on the strip surface. In order to deflect both jets downward by a certain angle, a cylinder with small diameter is installed tangentially to the exit of the lower lip of the two-dimensional jet. In order to find an optimum cylinder diameter, the three dimensional flow field is analysed numerically by using the commercial code, STAR-CD. And the coating thickness is calculated by using an integral analysis method to solve the boundary layer momentum equation. In order to compare the present noble method with the conventional baffle plate method to prevent the EOC, the flow field with a baffle plate is also calculated. The calculation results show that the tangentially installed cylinder at the bottom lip of the jet exit is more effective than the baffle plate to prevent EOC.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.22 no.1
• /
• pp.81-90
• /
• 2004

Because satellite images include geometry distortions according to photographing conditions and sensor property, and their spatial and radiational resolution and spectrum resolution are different, it is so difficult to make a precise results of analysis. For comparing more than two images, the precise geometric corrections should be preceded because it necessary to eliminate systematic errors due to basic sensor information difference and non-systematic errors due to topographical undulations. In this study, we did sensor modeling using satellite sensor information to make a basic map of change detection for artificial topography. We eliminated the systematic errors which can be occurred in photographing conditions using GCP and DEM data. The Kompsat EOC images relief could be reduced by precise rectification method. Classifying images which was used for change detections by city and forest zone, the accuracy of the matching results are increased by 10% and the positioning accuracies also increased. The result of change detection using basic map could be used for basic data fur GIS application and topographical renovation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.4
• /
• pp.88-94
• /
• 2004

The electrical design of the Ka-band antenna for the domestic Communications and Broadcasting Satellite (CBS) is described. The antenna has the offset Gregorian structure and is installed on the Earth-facing panel of the satellite. The electrical performance specifications for the antenna were determined from the required EIRP and G/T through the payload level performance analysis. This paper utilized the reflector shaping technology for the trade-off among the major performance parameters, resulting in compliance of all the parameters. The designed antenna shows 37.95 dBi EOC (End of Coverage) gain and 28.7 dB sidelobe isolation for transmit band, and 37.49 dBi EOC gain and 31.1 dB sidelobe isolation for receive band, The electrical performances of the antenna have been verified via the electrical testing of a manufactured EQM (Engineering Qualification Model) antenna.