• Current Industrial and Technological Trends in Aerospace
• /
• v.6 no.1
• /
• pp.124-134
• /
• 2008

The rising demand for the high efficiency and high covertness in UAV motivates the miniature design of the high performing mission sensors, or payloads. One of the promising payload sensors, EO/IR sensor has evolved satisfying its demands and became the main stand-alone mission sensor for 200kg-range UAV. One aspect in development of EO/IR sensor concerns lack of specification criterions to represent its performance. Even though the high demand and competition among each manufacturer caused EO/IR features subject to rapid change collateral to new technology, the datasheets maintained the conventional outdated formats which leave some of the major components in ambiguity. Making comparisons or predicting actual performance with such datasheets is hardly worthwhile; yet, they could be important reference guide for the potential customers what to expect for the upcoming EO/IR. According to UAS Roadmap 2007-2032 published by DoD, one of the main potential customers as well as a main investor of EO/IR technology, EO/IR is expected to play key roll in solving urgent problems, such as see and avoid system. This paper will examine the recent representative EO/IR specialized in UAS missions through datasheets to find out current trend and eventually extrapolate the possible future trend.

• Current Optics and Photonics
• /
• v.3 no.1
• /
• pp.8-15
• /
• 2019

We describe a common optical system that merges a LADAR system, which generates a point cloud, and a more traditional imaging system operating in the LWIR, which generates image data. The optimum diameter of the entrance pupil was determined by analysis of detection ranges of the LADAR sensor, and the result was applied to design a common optical system using LADAR sensors and LWIR sensors; the performance of these sensors was then evaluated. The minimum detectable signal of the $128{\times}128-pixel$ LADAR detector was calculated as 20.5 nW. The detection range of the LADAR optical system was calculated to be 1,000 m, and according to the results, the optimum diameter of the entrance pupil was determined to be 15.7 cm. The modulation transfer function (MTF) in relation to the diffraction limit of the designed common optical system was analyzed and, according to the results, the MTF of the LADAR optical system was 98.8% at the spatial frequency of 5 cycles per millimeter, while that of the LWIR optical system was 92.4% at the spatial frequency of 29 cycles per millimeter. The detection, recognition, and identification distances of the LWIR optical system were determined to be 5.12, 2.82, and 1.96 km, respectively.

• Journal of Aerospace System Engineering
• /
• v.15 no.6
• /
• pp.42-49
• /
• 2021

To develop a high-resolution electro-optical/infrared (EO/IR) payload to be mounted on a high-speed and performance fighter aircraft in an external POD for acquiring daytime and nighttime image information on tactical targets, simulations, including flight environments and maneuvers, should be performed. Such simulations are pertinent to predicting the performance of several variables, such as aerodynamic force and inertia load acting on the payload. This paper describes the development of a flight data acquisition and analysis system based on flight simulation software (SW) for mission simulation of super-maneuverability fighter equipped with EO/IR payload. The effectiveness of the system is verified through comparison with actual flight data. The proposed flight data acquisition and analysis system based on FlightGear can be used as an M&S tool for system performance analysis in the development of the EO/IR payload.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.10a
• /
• pp.225-226
• /
• 2012

• Journal of Advanced Navigation Technology
• /
• v.21 no.6
• /
• pp.638-642
• /
• 2017

FOD is a generic term for substances with potential threats that can pose a fatal risk to aircraft. Therefore, FOD should be noted in all areas of the airport. Especially, the method of detecting and collecting FOD in runway and aircraft movements is very low efficiency and economical efficiency of airport operation, so it is essential to develop FOD automatic detection system suitable for domestic environment. As part of the aviation safety technology development project, the development of an automatic detection system for foreign matter in the moving area of the aircraft inside the airport is underway. In this paper, it is confirmed that EO / IR camera is used for detection of foreign objects at Taean Airfield of Hanseo University. EO camera is used during the day and IR camera is used at night.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.5
• /
• pp.613-617
• /
• 2016

Development-concerned parties, business managers and test evaluators have experienced conflicts among themselves due to the absence of standardized criteria for military electro-optical(EO) and infrared(IR) devices in test evaluation planning and evaluation phases. Therefore, establishment of objectified test and evaluation criteria for EO/IR devices is required. This paper applies South Korea's weather measurement average of minimum 15 km for visibility range, 3 bar from Johnson criteria for EO device and 4 bar from NATO's STANAG-4347 for IR device for target type, and 50 % probability for evaluation criteria, respectively. Based upon these criteria, this paper will establish suitable criteria that are improved for development weapon system in consideration of required capability of demanding forces and field environment.

• Journal of Advanced Navigation Technology
• /
• v.22 no.6
• /
• pp.522-529
• /
• 2018

FOD refers to various metals and non-metallic foreign substances that pose a risk to aircraft. FODs occur in all areas and time zones, including runways, taxiways, and maintenance facilities, and pose a fatal hazard to aircraft safety during aircraft movements and take-off and landing. Rapid and effective detection and removal of FODs in the runway is required. As part of recent developments in aviation safety technologies, automatic detection of debris in runways in airports is under way. In this paper, we conducted an automated detection test using the EO/IR camera and radar at the Taean campus of Hansu University to confirm normal detection during the day and night.

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.9
• /
• pp.813-820
• /
• 2014

This paper presents design and performance validation of a method for motion compensation using fast steering mirror. First of all, the schematics of the Electro Optical/Infra-Red (EO/IR) and step-stare image gathering system for an aerial reconnaissance are introduced. Because of the steering mirror with low inertia so called Back scan mechanism (BSM), the fast step-stare image gathering technique that is required for taking a high-definition still image will be realized. After then, the BSM hardware includes motors and feedback sensors are introduced. Also, the motion profile for BSM will be designed to compensate roll scan motion of the gimbals. At the end of this paper, designed profile and tracking performance of the EO/IR system with BSM will be validated through experiments.

• Journal of Aerospace System Engineering
• /
• v.17 no.5
• /
• pp.28-33
• /
• 2023

In this research, the isolator and the inner gimbal inside of typical EO/IR equipment were replaced with a spring stabilizer. This Spring stabilizer system revealed an internal platform capable of external vibration damping and 6-DOF driving. This system was designed based on machined springs and spring modules of the spring stabilizer, structure, and other fixture. Through modal vibration analysis, suitable material for the spring was determined. Structural stability of the spring stabilization device was determined through random vibration analysis.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.4
• /
• pp.291-299
• /
• 2021

This paper presents the control logic for the momentum wheel and gimbals in the CMG system. First, the design of the control logic for the momentum wheel is described in consideration of the power consumption and stability. Second, the design of the control logic for the gimbals considering the resonance of the vibration absorber and stability is explained. Third, the measurement configuration for the force and torque generated by the CMG is described. Fourth, the results of the frequency and time response test of the momentum wheel and gimbals are shown. Last, the measurements of the force and the torque generated through the CMG are explained.