• Proceedings of the Mineralogical Society of Korea Conference
• /
• 2003.05a
• /
• pp.66-66
• /
• 2003

King George island, Antarctica, is mostly covered by ice sheet and glaciers, but the land area is focally exposed for several thousand years after deglaciation. For a mineralogical study of chemical weathering in the polar environment, glacial debris was sampled at the well-developed patterned ground which was formed by long periglaclal process. As fresh equivalents, recently exposed tills were sampled at the base of ice cliff of outlet glaciers and at the melting margin of ice cap together with fresh bedrock samples. Fresh tills are mostly composed of quartz, plagioclase, chlorite, and illite, but those derived from hydrothermal alteration zone contain smectite and illite-smectite. In bedrocks, chlorite was the major clay minerals in most samples with minor illite near hydrothermal alteration zone and interstratified chlorite-smectite in some samples. Smectite closely associated with eolian volcanic glass was assigned to alteration in their source region. Blocks with rough surface due to chemical disintegration showed weathering rinds of several millimeter thick. Comparision between inner fresh and outer altered zones did not show notable change in clay mineralogy except dissolution of calcite and some plagioclase. Most significant weathering was observed in the biotite flakes, eolian volcanic glass, sulfides, and carbonates in the debris. Biotite flakes derived from granodiorite were altered to hydrobiotite and vermiculite of yellow brown color. Minor epitactic kaolinite and gibbsite were formed in the cleaved flakes of weathered biotite. Pyrite was replaced by iron oxides. Calcite was congruently dissolved. Volcanic glass of basaltic andesite composition showed alteration rim of several micrometer thick or completely dissolved leaving mesh of plagioclase laths. In the alteration rim, Si, Na, Mg, and Ca were depleted, whereas Al, Ti, and Fe were relatively enriched. Mineralization of lichen and moss debris is of much interest. They are rich of A3 and Si roughly in the ratio of 2:1 to 3:1 typical of allophane. In some case, Fe and Ti are enriched in addition to Al and Si. Transmission electron microscopy of the samples rich of volcanic glass showed abundant amorphous aluminosilicates, which are interpreted as allophane. Chemical weathering in the King George Island is dominated by the leaching of primary phyllosilicates, carbonates, eolian volcanic glass, and minor sulfides. Authigenesls of clay minerals is less active. Absence of a positive evidence of significant authigenic smectite formation suggests that its contribution to the clay mineralogy of marine sediments are doubtful even near the maritime Antarctica undergoing a more rapid and intenser chemical weathering under more humid and milder climate.

• Horticultural Science & Technology
• /
• v.34 no.3
• /
• pp.355-362
• /
• 2016

This study was carried out to investigate the effects of rain-shelter types on growth, and fruit quality of red pepper (Capsicum annuum, 'Kemmaru') cultured in paddy. Applied rain-shelter types were outfield (control), simple rain-shelter plastic house with 2 rows (2R), simple rain-shelter plastic house with 4 rows (4R), and perfect plastic house (House). The plant height was the highest in Houses treatment. There was no difference in leaf length and width among the rain-shelter treatments. The fresh and dry weight of red pepper was high in order of House > 4R > 2R > Control. The ASTA value is irregular tendency among the treatments. Hunter's color value 'a' and 'b' was not different from among the treatments. Phytophthora blight, powdery mildew, bacterial spot were not occurred in all of treatments, and Anthracnose was only occurred in control. Mite, Microcephalothrips abdominalis, and Bemisia tabaci were not occurred in all of treatments, and aphid, Helicoverpa assulta, and virus were occurred all of treatments as same degree. Our results will provide rain-shelter cultivation of red pepper can be increase dry yield and decrease disease and insects.

• Journal of Korea Society of Industrial Information Systems
• /
• v.13 no.2
• /
• pp.69-79
• /
• 2008

Due to popularization of the wireless Internet and mobile devices the infrastructure of the ubiquitous environment, where users can get information whatever they want anytime and anywhere, is created. Therefore, a variety of fields including the education studies methods for efficiency of information transmission using on-line and off-line contents. In this paper, we propose the Mixed Mobile Education system(MME) that improves educational efficiency using on-line and off-line contents on mobile devices. Because it is hard to input new data and cannot use similar off-line contents in systems used additional tags, the proposed system does not use additional tags but recognizes of-line contents as we extract feature points in the input image using the mobile camera. We use the Scale Invariant Feature Transform(SIFT) algorithm to extract feature points which are not affected by noise, color distortion, size and rotation in the input image captured by the low resolution camera. And we use the client-server architecture for solving the limited storage size of the mobile devices and for easily registration and modification of data. Experimental results show that compared with previous work, the proposed system has some advantages and disadvantages and that the proposed system has good efficiency on various environments.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4354-4359
• /
• 2010

The study performed questionnaire to the patients receiving implant operation, who visited dental clinics and hospitals(2 hospitals and 5 clinics) from Jul. 1, 2009 to Sep. 12, 2009 in order to study the factors giving effects to patient's satisfaction in the selection of implant. 145 questionnaire papers collected from patients were analyzed with SPSS12.0 program. The result revealed that the satisfaction with implant operation was usually normal when implant was operated because of tooth extraction due to dental caries and periodontal disease and it was usually high when implant was operated because of wound(P<0.05). When considering each cause of tooth extraction, the satisfaction with pronunciation function was usually normal(P<0.001), the satisfaction with functional part including foreign body sense was very low when the cause of operation was periodontal disease(P<0.01). The satisfaction with hospital environment depending on the cause of hospital selection was usually high when hospital was selected because of doctor's fame. It was low when hospital was selected because it was close to home(P<0.001). The satisfaction with the number of hospital visits depending on the number of implanted teeth was usually low when many teeth were implanted(P<0.01). The analysis on the satisfaction with tooth shape and color showed that the satisfaction was high when '1~2' teeth and 'more than 6' teeth were implanted(P<0.05). In order to improve patient's satisfaction with implant, it is necessary to recognize individual's oral status and request correctly. It is determined that proposal of operation period, number of hospital visits, function and expected aesthetic satisfaction degree will contribute to the improvement of mutual reliance between doctor and patient and post-operation satisfaction degree.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.358-365
• /
• 2017

In this paper, we propose an object recognition method using image information to improve the efficiency of visual servoingfor industrial manipulators in industry. This is an image-processing method for real-time responses to an abnormal situation or to external environment change in a work object by utilizing camera-image information of an industrial manipulator. The object recognition method proposed in this paper uses the Otsu method, a thresholding technique based on separation of the V channel containing color information and the S channel, in which it is easy to separate the background from the HSV channel in order to improve the recognition rate of the existing Harris Corner algorithm. Through this study, when the work object is not placed in the correct position due to external factors or from being twisted,the position is calculated and provided to the industrial manipulator.

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.10
• /
• pp.383-392
• /
• 2014

The research for coatings is one of the most popular and active research in the polymer industry. For the coatings, electronics industry, medical and optical fields are growing more important. In particular, the trend is the increasing of the technical requirements for the performance and accuracy of the coatings by the development of automotive and electronic parts. In addition, the industry has a need of more intelligent and automated system in the industry is increasing by introduction of the IoT and big data analysis based on the environmental information and the context information. In this paper, we propose an optimization model for the design of experiments based coating formulation data objects using the Internet technologies and big data analytics. In this paper, the coating formulation was calculated based on the best data analysis is based on the experimental design, modify the operator with respect to the error caused based on the coating formulation used in the actual production site data and the corrected result data. Further optimization model to correct the reference value by leveraging big data analysis and Internet of things technology only existing coating formulation is applied as the reference data using a manufacturing environment and context information retrieval in color and quality, the most important factor in maintaining and was derived. Based on data obtained from an experiment and analysis is improving the accuracy of the combination data and making it possible to give a LOT shorter working hours per data. Also the data shortens the production time due to the reduction in the delivery time per treatment and It can contribute to cost reduction or the like defect rate reduced. Further, it is possible to obtain a standard data in the manufacturing process for the various models.

• Cross-Cultural Studies
• /
• v.27
• /
• pp.59-79
• /
• 2012

China and Japan are geographically close and the two countries had shared the Chinese Character Culture and the thoughts of Confucianism, Buddhism and Taoism since the ancient age. They also actively exchanged culture in various areas. Some cultural exchanges had been caused by surrounding environment and culture had been introduced to other country in a natural way; while some cultural exchanges had been forcibly introduced through artificial process. It is believed that such cultural phenomenon must have had impact on the make-up cultures of the two countries and it was assumed that there must have been commons and differences in the make-up cultures of the two countries. This study explored the historical background of the Ching dynasty of China and the Edo Age in Japan, which are in the same time frame, and studied the aesthetic consciousness of the two countries at the time. Then the make-up style of ladies in the two countries had been studied to find out how their aesthetic consciousnesses had been expressed in the make-ups of the two countries. Then the commons and differences in make-up skills between the two countries had been identified. According to the study results, the main stream of aesthetics during the Ching dynasty in China can be classified into Confucianism aesthetics and Taoism aesthetics. On the other hand, the main stream of aesthetics during the Edo Age in Japan can be classified into "mitate(見立)", "ikki(いき)" and "garumi(かるみ). The skin care in the make-up culture of Ching dynasty in China was based on "rouge (?脂, yanzhi)" and "powder(粉, fen)". The Ching ladies loved the make-up style using rouge. It had been same both in the high society and common people. The eyebrow care was delicate and curved so that the feminine beauty with elegant spirit could be emphasized. The lips had been expressed to be smaller and the ladies tried to express elegance and reliability, rather than frail and tender feminine image. The skin care in the make-up culture of Edo Age in Japan focused on even applying of white powder so that the face would look soft. The eyebrow make-up was a very important part of the make-up. The shapes of eyebrow had been advanced in various styles and there had been eyebrow make-up styles such as "crescent-shaped brow (三日月), "crane style brow (鶴眉) and "Tang style brow (唐眉). The lips had been applied of thick red color, imitating the make-up skill of the ladies in the entertainment business. The lips make-up skill expressing the lips in two colors had been quite popular. Among the make-up skills during the Edo Age in Japan, the "black teeth (齒黑)" can be said as the most unique make-up style of Edo Age.

• Journal of agriculture & life science
• /
• v.45 no.3
• /
• pp.43-51
• /
• 2011

This project was conducted to measure actual temperature, relative humidity (RH), and light intensity at different apartment floors and to suggest suitable indoor plants by investigating morphological changes of Treophelosparmum asiatioum and Fittonia verchaffeltii var. argyroneura as affected by light intensity. Temperature and RH in apartment verandas were measured in three different (2nd, 9th, and 16th) floors on three different buildings for 30 days seasonally. The light intensity, temperature, and RH were recorded outside (parking area) and inside apartment verandas for 24 hours on a selected sunny summer day (between Aug. 19 and Sept. 14, 2008). Based on the first study, we investigated effect of simulated light intensity (40, 70, 100, and $600{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$) on changes in growth and development of T. asiatioum and F. verchaffeltii var. argyroneurain growth chambers. However, daily mean light intensity of 2nd, 9th, and 16th floors was different each other as it was about 40, 70, and $100{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, respectively. In the growth chamber experiment, plant height, internode length, and leaf length and width were not affected significantly by light intensity, but changes in leaf color were apparent in the new leaves with the increasing light intensity. The results suggest that T. asiatioum could be best fit to high, and F. verchaffeltii var. argyroneura to lower floor verandas, considering their aesthetic values.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.6
• /
• pp.345-350
• /
• 2006

Recently we have interest on rice products developed by environment-friendly management. The technology of paper mulching was practised without herbicide in machine transplanting cultivation of paddy. A field experiment was conducted on Gangseo series (coarse loamy, mixed, nonacid, mesic family of Aquic Fluventic Eutrochrepts) at the National Institute of Crop Science (NICS), RDA, Suwon, Gyeonggi province, Republic of Korea in 2004. This experiment was carried out to evaluate rice growth, weed control and nitrogen efficiency by the different controlled-release fertilizer levels in paper mulching transplanting. Treatments consisted of conventional fertilization, controlled-release fertilizer (100%, 80%, 60%) compared with nitrogen amount ($110kg\;ha^{-1}$) of conventional fertilization and no nitrogen plot. Mulching paper consisted of recycled paper which was coated with biodegradable plastics. There were no differences between conventional rice transplanting and paper mulching on missing hills. Weed occurrence and control were diverse and low as fertilizer amount increased. Plant height and tiller number per hill increased as fertilizer amount decreased. There were no difference between controlled-release fertilizer 80% and conventional fertilization plot on rice growth traits. Leaf color and $NH_4{^+}-N$ in soil had similar trends. There was no difference in yield between controlled-release fertilizer 80% and conventional fertilization plot. Agronomic nitrogen-use efficiency was high as fertilizer amount decreased. Therefore, these results suggested controlled-release fertilizer 80% should be optimum amount under paper mulching transplanting of rice considering weed control, rice growth and nitrogen efficiency.

• Journal of Digital Convergence
• /
• v.19 no.9
• /
• pp.189-199
• /
• 2021

In order to increase the self-reliance rate of new and renewable energy in order to respond to the mandatory domestic zero-energy buildings, the taller the building, the more limited the site area, and installing PV modules on the roof is not enough. Therefore, BIPV (Building integrated photovoltaic, hereinafter BIPV) is the industry receiving the most attention as a core energy source that can realize zero-energy buildings. Therefore, this study conducted a survey on the problems of the BIPV industry in a self-discussing method for experts with more than 10 years of experience of designers, builders, product manufacturers, and maintainers in order to suggest the right direction and revitalize the BIPV industry. Industrial problems of BIPV adjustment are drawn extention range of standard and certification for products, range improvement for current small condition of various kind productions, need to revise standards for capable of accomodating roof-type, color-module and louver-module, necessary of barrier in flow of foreign modules into korea through domestic certification mandatory, difficulty in obtaining BIPV information, request to prevent confusion among participants by exact guidelime about architectural application part of BIPV, and lack of the BIPV definition clearness, support policy, etc. Based on the improvements needed for the elements, giving change and competitiveness impacts aims to present and propose counter measures and direction.