• KIEAE Journal
• /
• 제10권4호
• /
• pp.67-73
• /
• 2010

As more and more people desire to live in an apartment complex with a comfortable outdoor space, many construction company became interested in outdoor design. In order to increase the use of outdoor space and create the most pleasant environment, outdoor thermal environment and comfort should be evaluated quantitatively from the design stage. This study utilized ENVI-met 3.1 model to analyze outdoor thermal environment in apartment complex, and evaluated outdoor thermal comfort in 6 points of apartment complex. The physiologically equivalent temperature(PET) was employed as a outdoor thermal index. Playground B had a poor thermal environment with the maximum PET $43^{\circ}C$ (Very hot). Because shading by building and tree didn't affect outdoor thermal environment of playground B. To design comfortable outdoor space from the view point of thermal environment, the factors influencing Mean radiant temperature(MRT) and wind speed should be considered in design stage. Since it is difficult to control outdoor thermal environment compared with indoor environment, we should take into account an assessment for outdoor thermal environment and comfort in outdoor design stage.

• 한국환경복원기술학회지
• /
• 제12권2호
• /
• pp.83-94
• /
• 2009

Environmental pollution becomes a serious problem in urban areas. Moreover, densely constructed strictures can be problematic to cities due to the rising temperature they cause as well as the increasing accumulation of air pollutants they generate by interrupting airflow. In order to improve residential amenity, it is necessary to improve the thermal environment by preserving wind corridors. To do so requires consideration to important aspects such as building arrangement, scale, vegetation, and land cover, which all have an effect on wind corridors. In this study, a typical arrangement-complex, which is the primary form of housing in Korea, was selected as a case ENVI-met. As a result of empirical analysis, the optimal apartment-complex arrangement that is most suitable for mitigating urban heat-islands phenomenon was determined, The outcome of this study can be utilized as a planning technique for apartment-complex construction in consideration to type of buildings, scale of buildings, and land cover.

• 대기
• /
• 제16권3호
• /
• pp.169-185
• /
• 2006

We have investigated the wind speed variations over the leeward region when the strong wind blows. In this study we employ Envi-met numerical model to simulate the effect of surface boundary conditions. This model is applied for three cases which are characterized by land use and terrain height. The base case having natural geographical condition shows the weakest wind speed around lee side of Chunsudae. The others which remove the vegetation and cut off the terrain above 20 m ASL represent the stronger wind speed than base case. The main factor of this result is the surface friction. The distinct variation of wind is found at offshore area between Chunsudae and the southern part of village, but the northern part where is apart from Chunsudae shows a small variation of wind pattern. The weakening of wind speed around residential area is a maximum of 4~10 m/s when the wind blows in the village as strong as 55 m/s. The gust wind speed is weakened about 7~17 m/s in this case if the coefficient of gust wind adapted as 1.75.

• 환경영향평가
• /
• 제20권2호
• /
• pp.133-140
• /
• 2011

A numerical study with Envi-met model is experimented to investigate the characteristics of wind pattern in Gangwon innovation city. In all case, most conditions such as wind speed, temperature, and surface are considered as the same, but wind direction is the only different factor. The wind directions considered in this study have a meaning of prevailing wind direction. When the prevailing wind with the direction of $247^{\circ}$ blows into the city, the ventilation passage toward the outside of city is formed and the stagnation of air is not expressed. In case of having the direction of $270^{\circ}$, most evident ventilation passages are composed. When the inflow wind direction is the north, $0^{\circ}$, there is some possibility of stagnation phenomenon. The case where the representative wind direction of three kind will flow with development, in compliance with the building is caused by with screening effect of some and shows a true stagnation phenomenon, wishes in the park and flowing water and the greens area to be for a long time formed and the wind direction is maintained.

• 한국환경과학회지
• /
• 제30권1호
• /
• pp.19-28
• /
• 2021

To reduce pollution, decrease the production of carbon dioxide, and to maintain a secure supply of energy, interest continues to grow in the area of renewable energy especially since there is a finite supply of cheap oil. Wind energy is one of the most viable options to consider and supply part of the energy needed to reduce dependence on foreign oil. However, it is difficult to predict the wind speed in an environment with many obstacles such as buildings and trees and getting accurate dimensions of those obstacles is difficult particularly on sloped mountainous terrain. In this study a drone was used to create a 3-D map of the campus of the Catholic University of Pusan. The dimensions and elevations for the 3-D map were used to make a model of the school campus in the CFD program Envi-met. Simulations were run for five different wind directions and 4 different elevations to find the location that would give the highest electrical output for a wind turbine. When considering all of these variables it was found that the optimal location was above the Student Union which had a 40% higher wind speed and could produce 274% more electrical power than the original wind speed.

• 한국환경과학회지
• /
• 제29권12호
• /
• pp.1153-1170
• /
• 2020

With global warming and the rapid increase in urbanization accompanied by a concentration of population, the urban heat island effects (UHI) have become an important environmental issue. In this study, rooftop greening and permeable asphalt pavement were selected as measures to reduce urban heat island and applied to a simple virtual urban environment to simulate temperature change using ENVI-met. A total of five measures were tested by dividing the partial and whole area application of each measure. The results showed that the temperature range of the base experiment is 33.11-37.11 ℃, with the UTCI comfort level described as strong heat and very strong heat stress. A case applied permeable asphalt has a greater temperature difference than a rooftop greening case, the larger the area where each condition was applied, the greater the temperature change was.

• 한국지구과학회지
• /
• 제41권2호
• /
• pp.111-128
• /
• 2020

본 연구에서는 복잡한 도심의 구조로 인한 미세먼지 농도의 강화 가능성에 대하여 데이터 마이닝 기술과 군집분석을 이용해 조사하였다. 데이터 마이닝 분석에서 미세먼지 농도와 서울지역 도시용도 데이터 사이에는 유의한 상관관계를 보이지 않았다. 그러나 전국 공공데이터를 기반으로 한 군집분석에서는 건물의 높이(층수)에서 특히 PM₁₀과 강한 상관관계가 나타났다. 단일 케노피 모델(Single Canopy Model) 및 미기상 도시모델링 프로그램(ENVI-Met.4)을 사용한 모델링 분석을 실시하여 도시지역에서 모사된 대기 대류가 건물 분포 및 높이 유형의 배열에 따라 다양한 난류의 패턴을 구현함을 확인하였다. 도시 건물의 복잡한 구조는 대류활동을 제어하여 정체상태를 유도하고 지표 부근의 미세먼지 강화가능성을 초래 하였다. 따라서 도심 구조와 형태에 따른 열환경의 변화로 인한 정체 효과는 미세먼지 산정에 있어서 반드시 고려되어야 한다. 복잡한 도시지역의 미세먼지 잔류확률에 대한 정보를 제공하기 위해서는 대기정체 현상이 중요한 의미로 해석될 수 있다.

• 환경영향평가
• /
• 제28권1호
• /
• pp.23-34
• /
• 2019

지구온난화는 해수면 상승이나 전 세계의 변덕스러운 기후와 같은 심각하면서 부차적인 문제를 야기한다. 2015년 여름에 심각한 폭염이 있은 이래로, 도시열섬에 대한 큰 관심이 모아졌다. 폭염 자체에 대한 연구뿐만이 아니라, 많은 연구가 온난화된 기후와 미시 기후에 적응하는 방법에 중점을 둔다. 기존 연구들의 상당부분은 도시열섬 효과를 완화하는 것인데, 이는 다양한 활동을 하고 있는 인구가 많은 도시 지역에 거대한 불침투성 표면이 존재하고 있기 때문이다. 또한 이 열 환경이 열 취약성에 의한 사망을 초래할 가능성이 높다는 것은 심각한 문제이다. 여름철 그린인프라의 냉각효과에 대한 논문이 많이 있어왔지만, 본 연구는 도시 협곡과 인접한 그린인프라 유형을 고려하여 가로수의 냉각 효과를 측정하는 데에 집중했다. 이 정량적 접근은 ENVI-met 시뮬레이션을 통해 서울의 상업지역 블록에서 진행되었다. 연구결과로 밀도가 높은 2열 식재가 단열식재보다 온도 변화에 더 민감하다는 것을 발견했다. 2열 식재 시나리오 중 가로수와 지표면 사이의 공간이 좁은 관목은 주간에 열을 저장하여 야간에 저장열 방출을 막아 더 높은 온도를 유지하는 것으로 밝혀졌다. 식생 공간의 냉각 효과를 정량화하면 미래의 비용 및 편익 평가 연구에 기여할 것으로 기대된다.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2009년도 추계학술발표대회 논문집
• /
• pp.104-108
• /
• 2009

Rapid urbanization resulted in expansion of urban area and increase of population bringing deepened housing shortage. Supply-oriented housing policy made apartment a representative residential space in Korea in spite of the short history of apartment. This study analyzed the shape and arrangement of main building by year and the microclimate in the complex depending on the number of floors. The purpose of this study was to present the basic data in developing apartment complex to solve problems like the stagnation of pollution source and the rise of temperature due to the declined ventilation in apartment complex, and the worsened urban heat island phenomenon due to the impeded flow of wind. This study rearranged the shape and arrangement of main building by year and the tendency of the number of floors by year in the process of change, by generalizing the process of change of apartment complex, a representative modern residential space through preliminary research. Based on it, 8 object lot by age was selected and simulated by using Envi-met. Simulation identified that the change of apartment complex takes place having a positive effect on microclimate in the apartment complex and the microclimate in the apartment complex is influenced a lot by the shape of complex. If in future apartment complex plan, a systematic legal criteria of design is made about the shape and arrangement of main building, it might have a positive effect on the improvement of microclimate in the apartment complex, a representative residential space in Korea.

• Spatial Information Research
• /
• 제20권1호
• /
• pp.27-38
• /
• 2012

최근 CFD 기술 발전과 보편화를 통해 소규모 지역에서의 수치기상모의 영향평가와 설계반영 기법이 단지계획과 엔지니어링 설계에 반영되는 추세이지만 수치지도에서의 건물이나 지물 높이정보 부재와 그에 따른 입력방법의 부정확성 등으로 인해 수치기상모의 결과의 신뢰성이 저하되어, 산업 현장에서 실험적 연구로만 진행될 뿐 일반 업무로는 확대되고 있지 않는 실정이다. 따라서 본 연구는 현재 대도시를 중심으로 구축되고 있는 항공 LiDAR 기술을 통해 수집된 데이터들로부터 수치기상모의에 필요한 기본 입력 자료를 자동 추출 및 구축하여 수치기상모의에 활용하고자 기존의 수치지도 및 현장조사 자료를 기반으로 하는 수치모의와 비교한 결과, 모의 범위 및 해상도가 증가할수록 초기입력자료(.in)의 생상효율성이 증가하였으며, 자료의 품질 및 해상도 또한 향상된 결과를 얻을 수 있었다. 이를 통해 향후, 도시 재개발로 인해 발생하는 입체적인 도시의 물리적 구조 변화를 항공 LiDAR 데이터를 이용함으로써 환경변화예측을 위한 수치모의에 빠르게 이용할 수 있을 것이다.