• 제목/요약/키워드: END OF SONG

검색결과 1,038건 처리시간 0.067초

일본의 자동차 리싸이클 기술동향 (Technology Trends of Recycling for ELV in Japan)

  • 이현용;송준엽;강재훈
    • 대한안전경영과학회:학술대회논문집
    • /
    • 대한안전경영과학회 2005년도 추계학술대회
    • /
    • pp.411-417
    • /
    • 2005
  • In the last year, the number of registered vehicles in Korea surpassed the 15 million mark, and increase in number continuously. Nowdays, this tendency has raised some problems inevitably in the view of expansion of ELV(End of Life Vehicles) and earth environment pollution resulted from it. A foreign country is strengthening law about a car recycling for to solve this problem. Car recycling technology in Japan was introduced in this paper.

  • PDF

실시간 미디어 전송을 위한 응용계층 멀티캐스트 트리 구성 알고리즘 (Application Layer Multicast Tree Constructing Algorithm for Real-time Media Delivery)

  • 송황준;이동섭
    • 한국통신학회논문지
    • /
    • 제29권11B
    • /
    • pp.991-1000
    • /
    • 2004
  • 최근까지 네트워크 계층에서 수행되는 IP 멀티캐스트는 많은 관심과 연구가 진행되고 있다. 하지만 유니캐스트 라우터들로 구성된 현재의 인터넷 망에서 IP 멀티캐스트의 적용은 불가능한 상태이다. 때문에 응용계층 멀티캐스트가 IP 멀티캐스트의 대안으로 제시되고 있다. IP 멀티캐스트가 네트워크 라우터들에 의존적인 반면 응용계층 멀티캐스트는 네트워크 계층과 독립적으로 수행된다. 본 논문에서는 실시간 미디어의 효과적인 전송을 위한 source에서 end-system들에 이르는 평균 지연 시간을 최소화하는 응용계층 멀티캐스트 트리 구성 알고리즘을 제안한다. 제안하는 알고리즘은 제어 변수로써 각 end-system들의 계산 수행능력과 네트워크 조건을 고려하며 트리를 구성하는 몇몇 end-system들에게만 부하가 집중되는 현상을 방지하도록 구성되었다. 제안하는 알고리즘에 의한 응용계층 멀티캐스트 트리는 clustering과 변형된 Dijkstra 알고리즘에 의해 구성된다. 즉, source와 proxy-sender들 사이의 트리와 각 cluster안에서 트리를 구성함으로써 전체 트리를 생성한다. 실험을 통하여 제안하는 알고리즘이 기존 알고리즘 보다 효과적임을 보였다.

POWER AWARE ROUTING OPTIMIZATION: AN ENHANCEMENT

  • Nguyen, VanDong;Song, Joo-Seok
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2004년도 춘계학술발표대회
    • /
    • pp.1453-1456
    • /
    • 2004
  • PARO, a power-aware routing optimization mechanism, is proposed in [1] to minimize the transmission power needed to forward packets between wireless devices in ad hoc network. The mechanism works by redirecting the route to pass through one or more intermediate nodes on behalf on source-destination pairs, then reducing the end-to-end transmission power. This paper will show an extension of this model and provide an analysis of the geometrical area lying between source and destination in which the intermediate node elects to perform redirection. The duration the intermediate node stays in that area is also computed.

  • PDF

마이크로 엔드밀링에서 공구변형 가공오차 보상에 관한 연구 (A Study on Compensation for tool deformation machining errors in micro end-milling)

  • 손종인;송병욱
    • Design & Manufacturing
    • /
    • 제17권4호
    • /
    • pp.24-32
    • /
    • 2023
  • In this study, we introduce research aimed at minimizing machining errors without compromising productivity by compensating for the machining errors caused by tool deformation. Our approach experimentally establishes the direct correlation between cutting depth and machining error, and creates predictive models using mathematical functions. This method allows for the prediction of compensated cutting depths to obtain the desired cutting profiles, thereby maximizing the compensation of machining errors in the cutting process.

Interoperable DRM Framework for Multiple Devices Environment

  • Hwang, Seong-Oun;Yoon, Ki-Song
    • ETRI Journal
    • /
    • 제30권4호
    • /
    • pp.565-575
    • /
    • 2008
  • As networks increase and cross-convergence occurs between various types of devices and communications, there is an increasing demand for interoperable service in the business environment and from end users. In this paper, we investigate interoperability issues in the digital rights management (DRM) and present a practical framework to support interoperability in environments with multiple devices. The proposed architecture enables end users to consume digital content on all their devices without awareness of the underlying DRM schemes or technologies. It also enables DRM service providers to achieve interoperability without costly modification of their DRM schemes.

  • PDF

양성 식도협착에 대한 단단문합술 치험 2예 (End-to-End Anastomosis for Benign Esophageal Stricture-2 Cases)

  • 이송암;김광택;손호성;이성호;선경;김태식;김요한
    • Journal of Chest Surgery
    • /
    • 제37권7호
    • /
    • pp.617-621
    • /
    • 2004
  • 양성 식도협착에 대한 분절절제술 및 단단문합술은 식도-장관 문합술에 비해 수술침습도가 적고 식도 고유기능을 보존할 수 있으므로, 짧은 분절의 식도협착에서 수술방법으로 고려해야 하지만 임상 보고나 분석에 대한 연구는 매우 적은 실정이다. 본원 흉부외과에서는 수술 후 문합부 협착이 있는 13개월 여아와 부식성 식도협착이 있는 27세 여자를 대상으로 단단문합술을 적용한 임상경험을 하였기에 보고하는 바이다. 생후 2일째 식도무형성증-식도기관누공에 대한 수술 후 발생한 문합부 협착인 경우는 결과가 좋았으나, 경부 식도의 고도 부식성협착에서는 단단문합술 후 다시 협착이 재발하여 인후-대장-위 문합술을 시행하게 되었다. 양성 식도협착에 대한 단단문합술은 협착의 범위와 원인에 따라 적응증을 선택하여 사용된다면 좋은 치료 방법이라고 생각하나 더 많은 연구가 필요하리라 생각한다.

표본건물 계측에 의한 공동주택 세대에서의 용도별 에너지사용량 및 CO2 배출량 연간 원단위 (2016 - 2017) 분석 (Annual Intensities (2016-2017) Analysis of Energy Use and CO2 Emission by End Use based on Measurements of Sample Apartment Units)

  • 진혜선;임한영;이수진;김성임;임재한;송승영
    • 대한건축학회논문집:구조계
    • /
    • 제34권7호
    • /
    • pp.43-52
    • /
    • 2018
  • In this study, annual site and primary energy use intensities (EUIs) and CO2 emission intensities (CEIs) per area by end use were estimated based on the measurement data from June 2016 to May 2017 of 50 sample apartment units in Seoul. In addition, estimated site EUIs by end use were compared to the U.S. Residential Energy Consumption Survey (RECS) 2009 data. Site EUIs by end use were found to be in the order of heating > electric appliance > domestic hot water > cooking > lighting > cooling > air movement. In the case of primary EUIs and CEIs by end use, electric appliance was found to be the largest. As results of comparison with the RECS 2009 data, it was found that site EUIs were very similar for heating, domestic hot water and electric appliance, etc., but slightly different for cooling. The number of sample apartment units will continue to increase until 2020 (total number of samples 200) and intensities data by end use will be continuously updated through continuous collection of measurement data.

Molecular Cloning of the 3'-Terminal Region of Garlic Potyviruses and Immunological Detection of Their Coat Proteins

  • Song, Sang-Ik;Song, Jong-Tae;Chang, Moo-Ung;Lee, Jong-Seob;Park, Yang-Do
    • The Plant Pathology Journal
    • /
    • 제15권5호
    • /
    • pp.270-279
    • /
    • 1999
  • cDNAs complementary to the 3'-terminal regions of two potyvirus genomes were cloned and sequenced. The clone G7 contains one open reading frame (ORF) of 1,338 nucleotides and a 3' untranslated region (3'-UTR) of 403 nucleotides at the 3'-end excluding the 3'end poly(A) tail. The putative viral coat protein (CP) shows 55%-92% amino acid sequence homology to those of Allium potyviruses. The genome size of the virus was analyzed to be about 9.0 kb by Northern blot analysis. Five cDNA clones were screened out using GPV2 oligonucleotide as a probe. One of these clones, DEA72, which has a longest cDNA insert, contains one ORF of 1,459 nucleotides and a 3'-UTR of 590 nucleotides at the 3'-end excluding the 3'-end poly(A) tail. The putative viral CP shows 57%-88% amino acid sequence homologies to those of Allium potyviruses. The genome size of the virus was analyzed to be about 9.6 kb by Northern blot analysis. The results of immunoblot and Northern blot analyses suggest that almost all of the tested garlic plants showing mosaic or streak symptoms are infected with DEA72-potyvirus in variable degrees but rarely infected with G7-potyvirus in variable degrees but rarely infected with DEA72-potyvirus in variable degrees but rarely infected with G7-potyvirus. Immunoelectron microscopy using anti-DEA72 CP antibody shows that this potyvirus is about 750 nm long and flexuous rod shaped.

  • PDF