• 한국정보과학회논문지:정보통신
• /
• 제36권3호
• /
• pp.184-190
• /
• 2009

WLAN 및 3G의 장점을 고루 갖춘 WiBro 기술이 국제 표준으로 채택됨에 따라, 수많은 관련 연구가 진행되었다. 그러나, WiBro 표준은 종단 간 통신에 대해서는 정의하고 있지 않으며, 따라서 종단간 보안을 제공하기 위해서는 별도의 보안 프로토콜의 적용이 필요하다. 대부분의 관련 연구들은 WiBro 표준 자체에 대한 성능 향상이나 보안 향상 등을 목적으로 진행되었지만, WiBro의 실제적인 응용에 대해서는 연구가 거의 진행되지 않았다. 우리는 WiBro를 IP 네트워크에서 활용하기 위한 방안으로, IPsec, TLS, DTLS와 같은 대표적인 종단 간 보안 프로토콜의 적용을 제안한다. 우리는 WiBro에 대한 종단 간 보안 프로토콜의 적용 가능성을 검토하고 그 성능을 검증하기 위해, NS-2를 이용하여 시뮬레이션을 수행하였다. 시뮬레이션 결과를 분석한 결과, DTLS가 TLS 및 IPsec보다 우수한 성능을 보였으며, 3가지 보안 프로토콜 모두 WiBro에 적용하기에 적합한 것으로 나타났다.

• 한국시뮬레이션학회논문지
• /
• 제14권4호
• /
• pp.69-76
• /
• 2005

To investigate the characteristics of the sound-pipe on the top of King Song-Dok bell, using computer simulation, the throat impedance was evaluated for the straight pipe and conical pipes with varying taper angles. When sound propagates in a rigid walled, unflanged circular pipe with wavelength larger than radius, the acoustic motion is planar, much as in a bar. The incident sound waves are reflected at the end of pipe and some of them are transmitted. The reflection coefficient and radiation impedance of the sound-pipe of King Song-Dok bell were calculated, and the results demonstrated that the high frequency sound is radiated through the sound-pipe. It behaves like a frequency filter.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.89-98
• /
• 2005

Preliminary pile load tests for the design of large diameter drilled shaft were performed on two of reduced scale(D=1370mm) test piles. The maximum loads of 2350 tonf in each direction were applied using bi-directional hydraulic jacks(Osterberg Cell) at toe. Neither of the test piles yielded in terms of skin friction and end bearing. Comparisons of the test results with several methods that estimate pile capacity show that the method of Horvath and Kenney(1979) for skin friction and Zhang and Einstein(1998) for end bearing were most appropriate for the site. The test results were directly applied to pile design in case RQD of skin and toe was larger than that of the test pile. It is desirable, therefore, to consider not only unconfined compression strength but also rock mass properties(i.e. TCR, RQD) for skin friction and end bearing evaluation in the future.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2023년도 춘계학술대회
• /
• pp.110-110
• /
• 2023

• Journal of Positioning, Navigation, and Timing
• /
• 제6권1호
• /
• pp.1-8
• /
• 2017

In this study, to design a multi-GNSS receiver using single RF front-end, the receiving performances for various frequency plans were evaluated. For the fair evaluation and comparison of different frequency plans, the same signal needs to be received at the same time. For this purpose, two synchronized RF front-ends were configured using USRP X310, and PC-based software was implemented so that the quality of the digital IF signal received at each front-end could be evaluated. The software consisted of USRP control, signal reception, signal acquisition, signal tracking, and C/N0 estimation function. Using the implemented software and USRP-based hardware, the signal receiving performances for various frequency plans, such as the signal attenuation status, overlapping of different systems, and the use of imaginary or real signal, were evaluated based on the C/N0 value. The results of the receiving performance measurement for the various frequency plans suggested in this study would be useful reference data for the design of a multi-GNSS receiver in the future.

• 한국농촌간호학회지
• /
• 제16권2호
• /
• pp.60-68
• /
• 2021

Purpose: This case report was attempted to present the process of the end of life nursing care provided by the visiting nurse. Methods: The subject was a person who was decided the long-term care Grade 1 and received a visiting nursing service, and the service was terminated on the death, and then was selected as a case with the consent of his family. The data were collected through long-term care benefit provision records and interviews with the visiting nurse. The nursing process was presented by applying the Omaha System. Results: The subject had digestion-hydration problems and respiration problems in the physiological domain, and the problems of role change, caretaking/parenting, spirituality, and grief in the psychosocial domain were identified. Depending on the problem, the end of life nursing care was provided to the subject and family members through activities on physical symptoms/signs, dietary management, end-life care, and coping skills. Conclusion: We expect that if the visiting nurse provides anticipatory guidance on the death process, the subject will be able to prepare for death comfortably with the family at home instead of vague fear of death.

• 대한수학회지
• /
• 제49권6호
• /
• pp.1163-1174
• /
• 2012

This paper examines a temperature dependent Stokes flow in a semi-infinite cylinder. Under appropriate initial and boundary conditions the author establishes exponential decay of solutions in energy norm with distance from the finite end of the cylinder.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.513-514
• /
• 2008

• Clinical and Experimental Pediatrics
• /
• 제56권9호
• /
• pp.396-400
• /
• 2013

Purpose: The purpose of this study was to share our experience of transcatheter closure of small patent ductus arteriosus (PDA) by using an Amplatzer vascular plug (AVP). Methods: We reviewed the medical records of 20 patients who underwent transcatheter closure at Samsung Medical Center and Sejong General Hospital from January 2008 to August 2012. The size and shape of the PDAs were evaluated by performing angiograms, and the PDA size and the AVP devices size were compared. Results: The mean age of the patients was $54.9{\pm}45.7$ months old. The PDAs were of type C (n=5), type D (n=12), and type E (n=3). The mean pulmonary end diameter of the PDA was $1.7{\pm}0.6$ mm, and the aortic end diameter was $3.6{\pm}1.4$ mm. The mean length was $7.3{\pm}1.8$ mm. We used 3 types of AVP devices: AVP I (n=5), AVP II (n=7), and AVP IV (n=8). The ratio of AVP size to the pulmonary end diameter was $3.37{\pm}1.64$, and AVP size/aortic end ratio was $1.72{\pm}0.97$. The aortic end diameter was significantly larger in those cases repaired with AVP II than in the others (P=0.002). The AVP size did not significantly correlate with the PDA size, but did correlate with smaller ratio of AVP size to aortic end diameter ($1.10{\pm}0.31$, P=0.032). Conclusion: Transcatheter closure of small PDA with AVP devices yielded satisfactory outcome. AVP II was equally effective with smaller size of device, compared to others.

• 한국정밀공학회지
• /
• 제19권2호
• /
• pp.79-86
• /
• 2002

In end milling process the undeformed chip thickness and the cutting force components vary periodically with phase change of the tool. In this study, up end milling process is transformed to the equivalent oblique cutting. The varying undeformed chip thickness and the cutting force components in end milling process are replaced with the equivalent average ones. Then it can be possible to analyze the chip-tool friction and shear process in the shear plane of the end milling process by the equivalent oblique cutting system. According to this analysis, when cutting Inconel 718, 61, 64 and 55% of the total energy is consumed in the shear process with the helix angle 30$^{\circ}$, 40$^{\circ}$ and 50$^{\circ}$ respectively, and the balance is consumed in the friction process. With the helix angle of 40$^{\circ}$ the specific cutting energy consumed is smaller than with the helix angle 30$^{\circ}$ and 50$^{\circ}$.