• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.583-584
• /
• 2015

Energy Storage System(ESS) can be used as several purposes such as uninterruptible power supply (UPS), frequency regulation, maximum load cut, and etc. This paper analyzes and simulates the reclosing operation in distribution system with ESS for frequency regulation and maximum load cut. To solve the effect from ESS, two sequences in reclosing process are added to conventional reclosing. The modelings and simulations of reclosing operation using EMTP/ATPDraw are performed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.561-563
• /
• 2003

This paper deals with simulation of lightning overvoltage generated by back flashover entering 345[kV] Gas Insulated Substation. In order to protect the substation equipment against lightning surge, insulation coordination is performed with the lightning arrester. This paper suggests optimal location of lightning arrester using the EMTP/ATPDraw to mere economically and effectively reduce the lightning surge incoming overhead lines.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.740-741
• /
• 2007

This paper analyses the transient state of underground distribution system against single line to ground fault in underground transmission systems, when underground transmission systems and distribution systems are made of common grounding. Underground transmission systems and distribution systems are modeled by EMTP/ATPDraw. Simulation is carried out considering variation of parameters such as value of common grounding, balance load and unbalance load.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1936-1937
• /
• 2007

본 논문은 EMTP / ATPDRAW를 이용하여 II-등가모델을 이용한 DC 전원 가압 시 과도현상 분석 결과를 제시하였다. T-등가모델 보다 II-등가모델이 정확히 우리가 원하는 고조파를 완전히 제거하지는 못하지만 간단한 직렬연결을 통하여 제거할 수 있는 고조파의 종류를 늘릴 수 있다는 장점 때문에 송전 설비의 추가적인 건설이 어려운 우리나라의 상황에 송전 설비를 최적으로 사용할 수 있는 적절한 방법이 됨을 알 수 있다.

• 대한전기학회논문지:전력기술부문A
• /
• 제51권5호
• /
• pp.247-254
• /
• 2002

This paper describes a fault location algorithm in real combined transmission systems with underground power cable. The algorithm to calculate the fault location was developed using DWT wavelet transform and travelling wave occurred at fault point. And the proposed algorithm is also used the transient signal of one end in stead of the signal information of two ends. On the other hand, in this papers, the method to discriminate fault point between overhead line and cable section is also Proposed. Variety simulations were carried out to verify the accuracy and effectiveness of the proposed algorithm using EMTP/ATFDraw and Matlab. Simulation results show that the proposed method has the excellent ability for discrimination of fault section and fault location in combined transmission systems with power cables.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.87-88
• /
• 2011

전기 자동차는 내연기관 차량을 대체할 차세대 그린카의 대표 차종으로 부각되고 있다. 전기 자동차가 상용화되기 위해서는 전기자동차 자체의 성능뿐만 아니라 충전 인프라 발전이 함께 이뤄져야 한다. 현재 개발된 전기 자동차의 경우 충전 시간이 긴 반면 주행 거리가 짧기 때문에 효용성이 크게 떨어진다. 따라서 충전 시간을 최대한 단축 시키기 위한 급속 충전 시스템 개발이 활발하게 진행되고 있다. 본 논문에서는 전기 자동차용 급속 충전기에 적용되는 실제적인 DC-DC 컨버터를 ATPDraw/MODELS를 이용해 모델링하고 검증하였다.

• 전기학회논문지
• /
• 제58권3호
• /
• pp.450-454
• /
• 2009

This paper analyzes a asymmetry current with SFCL (Superconducting Fault Current Limiter) operation during transient period, when a fault occurs in power systems. The principle of asymmetry current nature is reviewed and asymmetry components reduction with SFCL operation is explained. To verify the performance of SFCL, a EMTP/ATPDraw model of SFCLs using MODELS language developed and simulated. Throughout the simulation, results presents the main factors for reducing the asymmetry component of fault current are not a quenching time, but a limiting resistance of SFCL and fault initiated angle.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.387-389
• /
• 2005

Scott 결선 변압기는 3상전원에서 단상부하를 공급해야하는 계통에서 많이 사용되고 있다. 특히 전기철도가 이에 해당되며 국내에서는 전기철도의 화장으로 Scott변압기가 154kV급의 송전계통에 연계되어 설치 운전되고 있다. Scott변압기의 특성상 단상인 부하측 또는 3상인 전원측에서 사고 발생시 각상에 흐르는 불평형 사고전류의 예측이 어려워 관련기기의 선정과 각종 보호계전기의 정정이 쉽지 않았으며 과도현상 해석도 쉽지않았다. ATP(Alternative Transient Program)는 전력계통의 과도현상뿐만 아니라 단락 및 지락과 같은 정상상태 해석 및 고조파 분석도 가능하며 그래픽 유저 인터페이스를 위한 ATPDraw도 개발되어 데이터 입력과 사용법이 보다 간편하게 되었으며, 출력파형을 위한 PlotXY도 개발되어 계산결과를 다양한 형태의 그래프로 출력할 수 있게 되었다. 무엇보다도 User Group에 가입하면 무료로 모든 프로그램을 사용할수 있는 장점도 있다. 본고에서는 ATP를 사용하여 Scott변압기의 모델링과 이를 통한 단락 및 지락 사고 둥의 해석 사례를 소개하였다.

• 전기학회논문지
• /
• 제57권5호
• /
• pp.773-782
• /
• 2008

This paper describes the method for proper location of protective equipment in underground distribution cable through field test and analysis at testing lines. To prove the reliability for analysis simulated by EMTP/ATPDraw, the testing results obtained by the real test and the analysis for the same test lines were compared each other. The accuracy of analysis was proved by the comparison. Over voltages were measured and analyzed at each point of cable and switches in case of which lightning surge current was applied. The analysing method was applied to real distribution systems to select the proper location of protective equipment. It is evaluated that the location of protective equipment was properly selected.

• 전기학회논문지
• /
• 제62권6호
• /
• pp.737-743
• /
• 2013

This paper describes the overvoltage through lightning surge analysis on underground system in DC combined distribution systems. It is considered that operating micro grid including distributed generation with smart grid can make possibility of composing new distribution system different from existing one. However, there are many papers about low voltage DC distribution in grids or buildings but not many about replacement or distributing 22.9kV AC distribution system to DC system. Among many research need for DC system development, overvoltage is studied in this paper. Overvoltage is simulated on DC cable when lightning strikes to overhead grounding wire which is installed at the nearest location from power cable section. Analysis as well as modeling is performed in EMTP/ATPDraw. It is evaluated that analysis results can be used to design of DC underground distribution power cable system.