• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.4
• /
• pp.426-433
• /
• 2014

The high-altitude electromagnetic pulse(HEMP) generated by a high-altitude nuclear explosion. This paper presents the comparison of electric field penetration in Bell laboratories and IEC 61000-2-9 standard when HEMP source penetrates through Naval Warship conducted coupling path and radiated coupling path. Also we analyze the effects of two kinds of coupling and propose Protective measures. Simulation results confirm IEC 61000-2-9 standard is more strict than the Bell Laboratories standard except for a lower frequency band, so we proposed IEC 61000-2-9 standard as a Naval HEMP standard. Finally, we offer the protective measures such as the shielding coating, Honeycomb ventilation, TVS in order to meet the military criteria.

• Transactions on Electrical and Electronic Materials
• /
• v.16 no.1
• /
• pp.29-33
• /
• 2015

This paper presents the results of the optical characteristics of ITO thin film with different buffer layer thicknesses of $SiO_2$ and $Nb_2O_5$ for touch sensor application. $SiO_2$ and $Nb_2O_5$ buffer layers were deposited using RF magnetron sputtering equipment. The buffer layers were inserted between glass and ITO layers. In order to compare with the experimental results, the Essential Macleod Program (EMP) was adopted. Based on EMP simulation, the [$Nb_2O_5{\mid}SiO_2{\mid}ITO$] multi-layered thin film exhibited high transmittance of more than 85% in the visible region. The actual experimental results also showed transmittance of more than 85% in the visible region, indicating that the simulated results were well matched with the experimental results. The sheet resistance of ITO based film was about $340{\Omega}/sq$. The surface roughness maintained a relatively small value within the range of 0.1~0.4 nm when using the $Nb_2O_5$ and $SiO_2$ buffer layers.

• Microbiology and Biotechnology Letters
• /
• v.24 no.1
• /
• pp.27-36
• /
• 1996

The aim of the present research program was to identify and develop strains of actinomycetes producing antifungal antibiotics which inhibit cell wall biosynthesis. 860 strains of Actinomycetes were isolated from various soil samples. Three isolates, EMS4, EMP22, and L234 were selected as the strains producing antifungal antibiotics inducing abnormal morphology against Penicillium cyclopium, Cryptococcus laurentii, and Aspergillus flavus, respectively. Taxonomic unit characters of the strains were tested and the data were analyzed numerically using TAXON program. EMS4, EMP22, and L234 were indentified to be a member of Streptomyces lavendulae, Streptomyces willmorei, and Streptomyces aburaviensis, respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.8
• /
• pp.764-768
• /
• 2006

For the possible application of pearl pigment, multi-layered $TiO_2/Al,\;Cr/TiO_2$ thin film were deposited on $SiO_2$ substrate by using sputtering method, $TiO_2$ and Al or Cr was selected as a possible high and low refraction material at the film interface respectively. Optical properties including color effect were systematically studied in terms of different film thickness and film layers by using spectrometer. In order to expect the experimental results, the simulation program, the Essential Macleod Program(EMP) was adopted and compared with the experimental data. The film consisting of $TiO_2/Al,\;Cr/TiO_2$ layers shows a wavelength range of $430{\sim}760nm$, typically color ranges between bluish purple and red. It was confirmed that this experimental result was quite well consistent with the experimental one.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.37-43
• /
• 2017

This review investigates the basic principle of physical interactions and failure mechanisms introduced in the materials and inner parts of semiconducting components under electromagnetic pulses (EMPs). The transfer process of EMPs at the semiconducting component level can be explained based on three layer structures (air, dielectric, and conductor layers). The theoretically absorbed energy can be predicted by the complex reflection coefficient. The main failure mechanisms of semiconductor components are also described based on the Joule heating energy generated by the coupling between materials and the applied EMPs. Breakdown of the P-N junction, burnout of the circuit pattern in the semiconductor chip, and damage to connecting wires between the lead frame and semiconducting chips can result from dielectric heating and eddy current loss due to electric and magnetic fields. To summarize, the EMPs transferred to the semiconductor components interact with the chip material in a semiconductor, and dipolar polarization and ionic conduction happen at the same time. Destruction of the P-N junction can result from excessive reverse voltage. Further EMP research at the semiconducting component level is needed to improve the reliability and susceptibility of electric and electronic systems.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.8
• /
• pp.735-741
• /
• 2016

Increasing the total length of waveguide-below-cutoff array(WBCA) as it is used to the duct in order to enhance shielding effectiveness, the design could cause higher cost, higher levels of difficulties in construction and the interruption a flow velocity. The multi-layered WBCA can compensate for this problem, which can be designed by crossing each waveguide layer. By conducting simulations from 2-layer to 8-layer structure, it can be observed that the shielding effectiveness increases from 52 dB to 75 dB. Comparing with the original WBCA in a shape of mono layer rectangular, our proposed waveguide becomes similar with the original value as the number of crossing layer increases. In addition, the analysis with the flow of fluid in the duct installed multi-layered WBCA are required. We demonstrate this analysis by doing the flow of fluid simulation, and concluded that the multi-layered WBCA has loss of flow of fluid less than unit rectangular WBCA.

• Journal of the Korean Ceramic Society
• /
• v.23 no.2
• /
• pp.43-49
• /
• 1986

By simple substitution of divalent cobalt nickel copper ion in the calcium-fluorapatite the ability to produce color was explored. To determine the solubility limit of cobalt nickel copper in the calcium-fluorapatite and the absorption spectrum with the addition of each transition elements XRD and visible range Spectroscopy were emp-loyed.

• Defense and Technology
• /
• no.10 s.272
• /
• pp.52-57
• /
• 2001

미래 전쟁에서 정보작전의 전 범위에 걸쳐 정보우세를 성취하기 위하여, 실시간 전투원의 공격 혹은 방어적인 조치를 가능하게 하기 위하여 실시간 탐지/타격 체계(sensor to shooter systems)의 기반구조가 국방정보통신체계로 구성되어야 한다. 또한 이러한 아군의 국방정보통신체계를 적의 공격으로부터 보호할 수 있는 능력을 구비하여야 하며, 반면에 유사시 적의 국방정보통신체계를 마비시킬 수 있는 정보공격 무기인 해커, 바이러스, 전자기파 폭탄(electromagnetic pulse bomb : EMP), 기타 사이버 무기 등을 확보하여야 할 것이다.

• Journal of Convergence Society for SMB
• /
• v.6 no.4
• /
• pp.25-30
• /
• 2016

This paper presents on the development of a compact anti-lost device requested recently. The proposed device consists of the master and slave modules based on Bluetooth4.1 technology. To implement a low-power characteristic, an algorithm has been also developed. The transmitting and receiving circuits are designed by using BoT CLE110 module supporting Bluetooth 4.1. The ATmega 328P-AU was used for the control and LP3874EMP was used as a linear regulator. Power consumption of the fabricated product in operating mode is only 10mAh and 35mAh for MCU operating state. Alarm operation distance is $10m{\pm}30%$, the effective radiated power is less than 10mW, the frequency band is designed to operate in the Bluetooth band with 26MHz bandwidth. And algorithms have been developed to extend the battery life. The size of the product was obtained as $45{\times}45{\times}15mm$ for master and $35{\times}35{\times}10mm$ fr slave. After the optimization process, it is expected to be commercialized as a wristwatch for anti-lost device.

• The Microorganisms and Industry
• /
• v.25 no.1
• /
• pp.2-9
• /
• 1999

A study was made on enzymes of carbohydrate metabolism in T. concretivorus grown with and without glucose. The present results show that T. concretivorus possesses high activities of pentose shunt pathway and related enzymes, glucokinase, G-6-P dehydrogenase, 6-PG dehydrogenase, and phosphoglucoisomerase, but low activities of enzymes unique to EMP(fructose-1,6-diphosphate aldolase). Although the synthesis of the latter enzymes remains largely unaffected by the growth enviroment, that of the former is stimulated by glucose. And the failure to detect ED pathway enzymes in cells grown in thiosulate or thiosulfate-glucose medium eliminates the ED pathway as a significant route of glucose catabolism in T.concretivorus. These results suggest that pentose shunt pathway performs an energetic role in glucose metabolism by T.concretivorus with EMP as a subway. The absence of ED pathway and the presence of pentose shunt pathway which is the major route of catabolism in T.concretivorus are similar to those of other obligately chemolitho-trophic thiobacilli. The G-6-P and 6-PG dehydrogenase are both NAD and NADP specific, but MAD predominant. However, the 3-PGAL dehydrogenase is only NAD specific. Since the specific activity of 3-PGAL generated from glucose is converted mainly into pyruvate which is channeled into the TCA cycle. All enzymes of the TCA cycle tested and NADH oxidase are detected in the cells of T.concretivorus grown in thiosulfate. The specific activities of fumarase and isocitrate dehydrogenase are high and others are low. The presence of two isocitrate dehydrogenase (NAD-and NADP-linked) may have important regulatory function for this organism. The activity of NAD-oxidase, which is implicated in the energy generating metabolism, was very high in the crude cell-free extract of T.concretivorus, recording 55.11 m.mu. mole/min/mg protein. This well coincides with the fact that activities of NAD-linked G-6-P dehydrogenase, 6-PG dehydrogenase and 3-PGAL dehydrogenase were high.