• 한국항공우주학회지
• /
• 제34권4호
• /
• pp.102-109
• /
• 2006

본 논문에서는 검증위성(KoDSat)의 시스템 레벨 전자기파(EMC) 환경시험 및 전자기파(EMC) 규격을 초과한 시험결과에 대해서 발사체에 대한 영향성 분석 및 하드웨어 개선 방법에 대하여 논하고, EMC2000 소프트웨어 해석을 통해 KSLV-1 발사체의 비행종단시스템(FTS : Flight Termination System)에 영향을 줄 수 있는 검증위성의 전자기파 노이즈원을 도출하였다. 또한 도출된 전자기파(EMC) 노이즈원은 EMI 필터, 접지, 쉴딩(Shielding) 처리 기법을 데이터획득장치(DAU) 전력보드(Power Board)에 적용하여 미약한 값으로 제거되었다. 그리고 이와 같은 일련의 분석과정에 의해 새로 설계된 전력보드는 검증차원에서 데이터획득장치(DAU)에 장착되어 박스자체 전자기파(EMC) 시험 및 최종 2차 검증위성 시스템 레벨 전자기파 시험을 통해 확인되었고, 측정 결과는 저주파대역과 UHF 주파수대역(430Mhz)에서 만족할 만한 감쇄레벨 값을 나타내었다.

• 한국전자파학회논문지
• /
• 제22권1호
• /
• pp.1-8
• /
• 2011

본 논문에서는 전자파 장해 측정용 야외시험장과 전자파 내성 시험장인 GTEM 셀과의 상관계수를 이용하여 GTEM 셀에서 전자파 허용 기준을 제시하였다. 실험적인 상관계수를 도출하기 위해서 피시험 기기를 제작하였으며, 제작된 피시험 기기의 전기장 세기를 10 m 야외시험장과 GTEM 셀에서 측정하였다. 또한, GTEM 셀의 3방위법을 역변환함으로써 GTEM 셀에서 복사 전력에 대한 허용 기준을 도출하였다. GTEM 셀의 3방위법과 15방위법에 대한 이론치를 프로그램화 하였으며, 프로그램을 통한 결과 값과 시험장에서 측정한 값을 비교 분석하였다. GTEM 셀에서 전자파 허용 기준을 새롭게 제시함으로써 GTEM 셀이 야외시험장의 전자파 방사(EMI) 대체 시험장으로서 활용될 수 있음을 확인하였다.

• 한국항해학회지
• /
• 제20권3호
• /
• pp.107-115
• /
• 1996

With the rapid advance of electronic equipments and the frequent, use of them, the electromagnetic environments including EMC or EMI problems are very complicated. The radiation of electromagnetic waves from electronic equipments has strictly been controlled by the authorities concerned from many years ago. Though it is the most proper to test EMI or EMC in the open area test site, we have used the anechoic chamber in place of the test site because of its various restrictions. To achieve the purpose, in this paper, the performances of a few anechoic chambers according to absorbing materials are analyzed for horizontal and vertical polarizations respectively. Furthermore, the calculated and the measured site attenuations in semi-anechoic chamber made with ferrite grid are compared. The obtained results are to be valuable for designing an anechoic chamber.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 추계학술대회 논문집
• /
• pp.167-170
• /
• 2003

This paper presents the results of a series of performance tests for the Stilting cryocooler. A free piston and free displacer(FPFD) Stilting cryocooler for cooling infrared and cryo-sensors is currently under development at KIMM. Our coolers are specifically designed to work in the thermal imaging device and to meet requirements such as cooling capacity, COP and high reliability. In this work, Stilting cryocooler is designed, manufactured and fabricated, and performance characteristics for the vibration, acoustic noise, EMI and leak rate are evaluated. Vibration outputs are measured to 20KHz for compressor and expander, respectively. And, the objective of noise test is a noise level, less than 30㏈ at 5 m. EMI tests are carried out according to the standard MIL-STD-461C tests RE01 and RE02. Leak test for the Stilting cryocooler is performed by bombing method.

• 대한전기학회논문지:전력기술부문A
• /
• 제51권1호
• /
• pp.23-28
• /
• 2002

In order to survey the radiation characteristics of pure line noise of unwanted noise from overhead high voltage AC transmission lines, a disk type gap noise generator was manufactured. Disk size which decides capacitance between the noise generator and earth was selected through preliminary indoor experiments and analysis by using surface charge method. The capacitance is one of principal parameters related to the injection of a proper noise current into lines. On the basis of the capacitance obtained from calculation, 5mm of space was given to the gap of the noise generator to be installed o test line and an aluminum disk of 60cm radius was made. The field experiments were performed with the noise generator hung on the Kochang 765 kV full scale test line. As the results, the useful data which can be used to analysis the radiation characteristics of noise from transmission lines were obtained. Those are the directivity of antenna toward the line, lateral profiles, frequency spectra, height pattern and so on.

• 한국통신학회논문지
• /
• 제25권3A호
• /
• pp.417-423
• /
• 2000

A broadband antenna available in the range of 30MHz for electromagnetic interference (EMI) test is proposed in this paper, This antenna is configurated in a disk-loaded cylindrical dipole (DLCD) connected to an 180。 hybrid balun consisting of two coaxial feeders. The performance of EMI antenna is characterized with its accurate antenna factor. The antenna factor for this antenna is obtained by using the method of moments and the calculated results are compared with the measured ones. Normalized site attenuation (NSA) is also measured by using this antenna. The results present that the propose antenna could be used for a reference antenna having measurement reproducibility and represented by a theoretically accurate analysing model in EMI measurement.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 추계학술대회 논문집 전력기술부문
• /
• pp.494-496
• /
• 2008

Tilting train has been developed to increase the operational speed of the trains on conventional lines which have many curves. This train are tilted at curves to compensate for unbalanced carbody centrifugal acceleration to a greater extent than compensation produced by the track cant so that passengers do not feel centrifugal acceleration and thus trains can run at higher speed at curves. This paper developed tilting train to evaluate electromagnetic interference(EMI) performance of TTX(tilting train express) with maximum operation speed 160 km/h on Ho_nam Conventional Rail[1].

• Journal of electromagnetic engineering and science
• /
• 제4권2호
• /
• pp.51-55
• /
• 2004

With the progress of the electronics industry and radio communication technology, certain problems, such as electromagnetic interference(EMI), have arisen due to the increased use of electromagnetic(EM) waves. International organizations such as CISPR, FCC, and ANSI have provided the standards for the EM wave environment and for the countermeasure of the electromagnetic compatibility(EMC). EM wave absorbers are used for constructing an anechoic chamber to test and measure EMI and electromagnetic susceptibility(EMS). In this paper, we have designed an one-body EM(electromagnetic) wave ferrite absorber, based on the equivalent material constants method for both normally and obliquely incident waves, whose absorption abilities are superior to that of the conventional ones. The fabricated absorber has a thickness of 27.68 mm and shows an absorption ability over 20 ㏈ in the frequency from 30 MHz to 6 ㎓.

• 한국항해학회지
• /
• 제21권4호
• /
• pp.29-38
• /
• 1997

Because of the result of a large use of electronic equipments, the occupation density of microwave frequency band is highly increased, and electromagnetic environment is getting more seriously bad. It is sometimes reported that electronic machines are not normally operated on account of the influence of undesired electromagnetic wave, which often gives fatal blow to even human life and thus becomes serious social problems. OATS(Open Area Test Site) is principally used to measure EMI or examine elelctromagnetic emission. Because of various restrictions we often build semi-anechoic chamber which has the function of OATS to measure EMI or EMS other than OATS. If the difference of the site attenuation between semi-anechoic chamber and OATS is within ${\pm}3dB$, the semi-anechoic chamber is recognized as adequate facility to measure EMI or EMS. Accordingly authors evaluate and analyze site attenuation due to absorbent materials, polarization, mutual coupling effects, etc. The calculated and the measured site attenuation in semi-anechoic chamber are compared. As a result good agreement is obtained.

• Journal of Power Electronics
• /
• 제19권5호
• /
• pp.1326-1335
• /
• 2019

Common mode (CM) chokes are a crucial part in EMI filters for mitigating the electromagnetic interference (EMI) of switched-mode power supplies (SMPS) and for meeting electromagnetic compatibility standards. However, the parasitic capacitances of a CM choke deteriorate its high frequency filtering performance, which results in increases in the design cycle and cost of EMI filters. Therefore, this paper introduces a negative capacitance generated by a negative impedance converter (NIC) to cancel the influence of equivalent parallel capacitance (EPC). In this paper, based on a CM choke equivalent circuit, the EPCs of CM choke windings are accurately calculated by measuring their impedance. The negative capacitance is designed quantitatively and the EPC cancellation mechanisms are analyzed. The impedance of the CM choke in parallel with negative capacitances is tested and compared with the original CM choke using an impedance analyzer. Moreover, a CL type CM filter is added to a fabricated NIC prototype, and the insertion loss of the prototype is measured to verify the cancellation effect. The prototype is applied to a power converter to test the CM conducted noise. Both small signal and EMI measurement results show that the proposed technique can effectively cancel the EPCs and improve the CM filter's high frequency filtering performance.