• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.20 no.44
• /
• pp.323-332
• /
• 1997

This study evaluated the compression force at the L5/S1 disc using EMG(Electromyography). EMG signals were analyzed under the condition of fixed vertical factor (20Cm∼80Cm), two horizontal factors (35Cm, 55Cm), and two weight factors (10Kg, 25Kg) 2 times per minute for each posture. Also, the result was compared with the compression force of each posture which computated by the equation of NIOSH(National Institute for Occupational Safety and Health) guide to manual lifting(1991). The experimental result show that EMG signals have more an effect on the Weight than the Horizontal factors. Also, there are not significant differences on the analysis result of EMG signals between Health members and not, because the body buildings which doing Health members are not enhanced the motor unit due to the MMH(Manual Material Handing).

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.3
• /
• pp.527-535
• /
• 2008

Many signal processing techniques have been described in the literature for estimating amplitude, frequency and duration variables of the surface EMG signal detected during constant voluntary contractions. They have been used in different application areas for the non-invasive assessment of muscle function. The main purpose of our research is to compare the most frequently used algorithms for information extraction from surface EMG signals under varying conditions in terms of the different window lengths, muscle contraction levels, muscles and subjects. In particular we focus on the issue of estimating the slope and intercept to resolve an linear regression line with utilizing real SEMG signals which represents voluntary contractions during thirty seconds.

• Journal of Biomedical Engineering Research
• /
• v.17 no.3
• /
• pp.395-401
• /
• 1996

In this paper a new neural network model, time delayed counterpropagation neural networks (TDCPN) which have high recognition rate and short total learning time, is proposed for electromyogram(EMG) recognition. Signals the proposed model increases the recognition rates after learned the regional temporal correlation of patterns using time delay properties in input layer, and decreases the learning time by using winner-takes-all learning rule. The ouotar learning rule is put at the output layer so that the input pattern is able to map a desired output. We test the performance of this model with EMG signals collected from a normal subject. Experimental results show that the recognition rates of the suggested model is better and the learning time is shorter than those of TDNN and CPN.

• Journal of IKEEE
• /
• v.24 no.1
• /
• pp.269-274
• /
• 2020

This paper is to study the exoskeleton robot for the walking of the elderly and the disabled. We developed and tested an Exoskeletal robot with two axes of freedom for joint motion. The EEG and EMG signals were used to move the joints of the Exoskeletal robot. By analyzing the EMG signal, the control signal was extracted and applied to the robot to facilitate the walking operation of the walking assistance robot. In addition, the brain-computer interface technology is applied to perform the operation of the robot using brain waves, spontaneous electrical activities recorded on the human scalp. These two signals were fused to study the walking recognition method of the supporting robot leg.

• Journal of the Institute of Convergence Signal Processing
• /
• v.24 no.1
• /
• pp.51-56
• /
• 2023

This study investigates the effect of sEMG sampling frequency on CNN learning performance at Korean finger number recognition application. Since the bigger sampling frequency of sEMG signals generates bigger size of input data and takes longer CNN's learning time. It makes making real-time system implementation more difficult and more costly. Thus, there might be appropriate sampling frequency when collecting sEMG signals. To this end, this work choose five different sampling frequencies which are 1,024Hz, 512Hz, 256Hz, 128Hz and 64Hz and investigates CNN learning performance with sEMG data taken at each sampling frequency. The comparative study shows that all CNN recognized Korean finger number one to five at the accuracy of 100% and CNN with sEMG signals collected at 256Hz sampling frequency takes the shortest learning time to reach the epoch at which korean finger number gestures are recognized at the accuracy of 100%.

• Journal of Korean Institute of Industrial Engineers
• /
• v.19 no.4
• /
• pp.87-96
• /
• 1993

Spectrum analysis of surface electromyogram (FMG) signals is an effective approach to the study of localized muscular fatigue during isometric contraction. Many investigators have con firmed the frequency of the EMG signals being lowered during sustained contaction. In this study, the cyclic loading tasks were performed, and a comparison was made for the median power frequency shift pattern of the EMG signals with the sustained contraction of the same load. The median power frequency shift of the EMG signals for the cyclic loading task was found to be a part of that for the sustained contraction. Based on this result, a new muscle fatigue index was computed by normalizing the duration of the sustained contraction. A fatigue index was obtained as a function of exertion level and the work/rest schedule. With the proposed fatigue index, it is possible to evaluate or predict the degree of muscular fatigue for a physically demanding task.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.8
• /
• pp.260-267
• /
• 2018

Surface electromyography (sEMG) is mainly used as an on/off switch in the early stage of the study and was then expanded to navigational control of powered-wheelchairs and recognition of sign language or finger gestures. There are difficulties in communication between people who know and do not know sign language; therefore, many efforts have been made to recognize sign language or finger gestures. Recently, use of sEMG signals to recognize sign language signals have been investigated; however, most studies of this topic conducted to date have focused on Chinese finger number gestures. Since sign language and finger gestures vary among regions, Korean- and Chinese-finger number gestures differ from each other. Accordingly, the recognition performance of Korean finger number gestures based on sEMG signals can be severely degraded if the same muscles are specified as for Chinese finger number gestures. However, few studies of Korean finger number gestures based on sEMG signals have been conducted. Thus, this study was conducted to identify potential forearm muscles from which to collect sEMG signals for Korean finger number gestures. To accomplish this, six Korean finger number gestures from number zero to five were investigated to determine the usefulness of the proposed muscles and electrode placements by showing that CNN technique based on sEMG signal after sufficient learning recognizes six Korean finger number gestures in accuracy of 100%.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.161-164
• /
• 2008

A realization for EMG signal sensing and vertical control system of robotizing arm is presented in this paper. The system is realized that a fine EMG bio-signals of humans' arm muscle are detected by surface electrode sensor, making a high performance amplifier and filtering, converting analog into digital signal and driving a servomotor for robotizing arm. The system is experimented by monitoring multiple step vertical control angles of robotizing arm corresponding to EMG signals in moving arm muscles. The experimental result are that the vertical control level is measured to around 2 degrees and mean error is 5% approximately.

• Journal of Biomedical Engineering Research
• /
• v.26 no.4
• /
• pp.243-249
• /
• 2005

The number of people who have lost limbs due to amputation has increased due to various accidents and diseases. Numerous attempts have been made to provide these people with prosthetic devices. These devices are often controlled using myoelectric signals. Although the success of fitting myoelectric signals (EMG) for single device control is apparent, extension of this control to more than one device has been difficult. The lack of success can be attributed to inadequate multifunctional control strategies. Therefore, the objective of this study was to develop multifunctional myoelectric control strategies that can generate a number of output control signals. We demonstrated the feasibility of a neural network classification control method that could generate 12 functions using three EMG channels. The results of evaluating this control strategy suggested that the neural network pattern classification method could be a potential control method to support reliability and convenience in operation. In order to make this artificial neural network control technique a successful control scheme for each amputee who may have different conditions, more investigation of a careful selection of the number of EMG channels, pre-determined contractile motions, and feature values that are estimated from the EMG signals is needed.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.5 no.1
• /
• pp.95-101
• /
• 2011

In this paper, we propose the gaussian mixture model based pattern classification algorithm of forearm electromyogram. We define the motion of 1-degree of freedom as holding and unfolding hand considering a daily life for patient with prosthetic hand. For the extraction of precise features from the EMG signals, we use the difference absolute mean value(DAMV) and the mean absolute value(MAV) to consider amplitude characteristic of EMG signals. We also propose the D_DAMV and D_MAV in order to classify the amplitude characteristic of EMG signals more precisely. In this paper, we implemented a test targeting four adult male and identified the accuracy of EMG pattern classification of two motions which are holding and unfolding hand.