• The Journal of Korea Robotics Society
• /
• v.13 no.4
• /
• pp.265-271
• /
• 2018

The recent prosthetic technologies pursue to control multi-DOFs (degrees-of-freedom) hand and wrist. However, challenges such as high cost, wear-ability, and motion intent recognition for feedback control still remain for the use in daily living activities. The paper proposes a multi-channel knit band sensor to worn easily for surface EMG-based prosthetic control. The knitted electrodes were fabricated with conductive yarn, and the band except the electrodes are knitted using non-conductive yarn which has moisture wicking property. Two types of the knit bands are fabricated such as sixteen-electrodes for eight-channels and thirty-two electrodes for sixteen-channels. In order to substantiate the performance of the biopotential signal acquisition, several experiments are conducted. Signal to noise ratio (SNR) value of the knit band sensor was 18.48 dB. According to various forearm motions including hand and wrist, sixteen-channels EMG signals could be clearly distinguishable. In addition, the pattern recognition performance to control myoelectric prosthesis was verified in that overall classification accuracy of the RMS (root mean squares) filtered EMG signals (97.84%) was higher than that of the raw EMG signals (87.06%).

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.3
• /
• pp.176-181
• /
• 2016

In this paper, the autonomous mobile robot control system for detecting fire was proposed using the wearable device based on EMG(Electromyogram) signal. Myo armband is used for detecting the user's EMG signal. The gesture was classified after sending the data of EMG signal to a computer using Bluetooth communication. Then the robot named 'uBrain' was implemented to move by received data from Bluetooth communication in our experiment. 'Move front', 'Turn right', 'Turn left', and 'Stop' are controllable commands for the robot. And if the robot cannot receive the Bluetooth signal from a user or if a user wants to change manual mode to autonomous mode, the robot was implemented to be in the autonomous mode. The robot flashes the LED when IR sensor detects the fire during moving.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2687-2689
• /
• 2002

본 연구는 환자의 근육 상태를 표면 근전도(EMG, Electrocardiogram)를 통해 정량적으로 평가한 결과를 기반으로 적응 전기치료를 수행 시, 근전도 정량평가에 영향을 주는 심전도 신호를 독립요소 해석(ICA, Independent Component Analysis)을 이용하여 획득된 신호로부터 분리함으로써, 정확한 근전도 정량평가를 할 수 있도록 하는 것을 목적으로 한다. 실험 방법은 소스(source)를 근전도와 심전도 2개로 가정하고, 4 채널을 통하여 획득된 신호를 10 Hz-500 Hz의 대역통과 필터를 이용하여 필터링한 후, 1000 sample/sec로 샘플링하여 센서로 사용하였으며, JADE(Joint Approximate Diagonalization of Eigen-matrices) 알고리즘을 통하여 근전도 신호와 심전도 신호를 분리하였다. 알고리즘의 permutation ambiguity와 scaling ambiguity 특성 문제를 해결하기 위하여, 분리된 신호의 주파수 분석을 통하여 심전도와 근전도 신호로 구분하였으며, 인식된 근전도 신호의 크기를 센서 신호를 기준으로 복원하였다. 결론적으로 아날로그 및 디지털 필터와 달리 근전도의 신호의 왜곡을 극소화하면서도 심전도 신호를 분리해 냄으로써, 근전도를 통한 근육상태의 효과적인 평가가 가능하게 되었다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.478-480
• /
• 2011

As the recent games industry grows slowly, the consumers come to have interests in new types of games which has different types from the conventional games. While the conventional games play with a simple interfaces such as a joystick and buttons, the new games are designed to have acceleration sensors, infrared sensors and video motion detection sensing using several types of sensors and allow users to play more actively. In this paper, we propose a method which uses the electromyogram(EMG) signals in interface.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.15 no.2
• /
• pp.87-94
• /
• 2020

This paper introduces a method to control an industrial robot arm to imitate the movement of the human arm and hand using electromyography (EMG) signals. The proposed method is implemented on the UR3 robot that is a popular industrial robot and a MYO armband that measure the EMG signals generated by human muscles. The communications for the UR3 robot and the MYO armband are integrated in the robot operating system (ROS) that is a middle-ware to develop robot systems easily. The movement of the human arm and hand is detected by the MYO armband, which is utilized to recognize and to estimate the speed of the movement of the operator's arm and the motion of the operator's hand. The proposed system can be easily used when human's detailed movement is required in the environment where human can't work. An experiments have been conducted to verify the performance of the proposed method using the teleoperation of the UR3 robot.

• Journal of Biomedical Engineering Research
• /
• v.40 no.6
• /
• pp.223-229
• /
• 2019

The number of knee-related disease patients and knee joint surgeries is steadily increasing every year, and for knee rehabilitation training for these knee joint patients, it is necessary to strengthen the muscle of vastus medialis and quadriceps femoris. However, because of the cost and time-consuming difficulties of receiving regular hospital treatment in the course of knee rehabilitation, we developed knee exoskeleton using rapid prototype for knee rehabilitation with feedback from the electromyogram (EMG) and inertia motion unit (IMU) sensor. The modules was built on the basis of EMG and an IMU sensor applied complementary filter, measuring muscle activity in the vastus medialis and the range of joint operation of the knee, and then performing the game based on this measurement. The IMU sensor performed up to 97.2% accuracy in experiments with ten subjects. The functional game contents consisted of an exergaming platform based on EMG and IMU for the real-time monitoring and performance assessment of personalized isometric and isotonic exercises. This study combined EMG and IMU-based functional game with knee rehabilitation training to enable voluntary rehabilitation training by providing immediate feedback to patients through biometric information, thereby enhancing muscle strength efficiency of rehabilitation.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.3
• /
• pp.181-189
• /
• 2015

Powered prosthesis is used to assist walking of people with an amputated lower limb and/or weak leg strength. The accurate gait phase classification is indispensable in smooth movement control of the powered prosthesis. In previous gait phase classification using physical sensors, there is limitation that powered prosthesis should be simulated as same as the speed of training process. Therefore, we propose EMG signal based gait phase recognition method to classify stairs ascending and stairs descending into four steps without using physical sensors, respectively. RMS, VAR, MAV, SSC, ZC, WAMP features are extracted from EMG signal data and LDA(Linear Discriminant Analysis) classifier is used. In the training process, the AHRS sensor produces various ranges of walking steps according to the change of knee angles. The experimental results show that the average accuracies of the proposed method are about 85.6% in stairs ascending and 69.5% in stairs descending whereas those of preliminary studies are about 58.5% in stairs ascending and 35.3% in stairs descending. In addition, we can analyze the average recognition ratio of each gait step with respect to the individual muscle.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.12
• /
• pp.129-137
• /
• 2013

As the usage of computer based systems continues to increase in our normal life, there are constant efforts to enhance the accessibility of information for handicapped people. For this, it is essential to develop new interface ways for physical disabled peoples by means of human-computer interface (HCI) or human-machine interface (HMI). In this paper, we developed HMI using electromyogram (EMG) and electrooculogram (EOG) for people with physical disabilities. Developed system is composed of two modules, hardware module for signal sensing and software module for feature extraction and pattern classification. To maximize ease of use, only two skin contact electrodes are attached on both ends of brow, and EOG and EMG are measured simultaneously through these two electrodes. From measured signal, nine kinds of command patterns are extracted and defined using signal processing and pattern classification method. Through Java based real-time monitoring program, developed system showed 92.52% of command recognition rate. In addition, to show the capability of the developed system on real applications, five different types of commands are used to control ER1 robot. The results show that developed system can be applied to disabled person with quadriplegia as a novel interface way.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.5
• /
• pp.533-539
• /
• 2012

The purpose of this study is to estimate a validity of control signal through a design of Exoskeleton Robot Arm's capable of intelligent recognition as a human arm's motion by using realtime processed data of generated EMG signals. By an intelligent algorithm, the EMG output value of human biceps and triceps muscles contraction can be recognized and used for the control over exoskeleton arm corresponding to human's recognition and judgement. The EMG sensing data of muscles contraction and relaxation are used as the input signal from human's body to operate the Exoskeleton Robot Arm thus copying human arm motion. An intelligent control of Exoskeleton Robot Arm is to design the analog control circuit which processes the input data, and then to manufacture an integrated control board. And then abstracted signal is passed by DSP signal processing, Fuzzy logic algorithm is designed for a accurate prediction of weight or load through the intelligent algorithm, and design an Exoskeleton Robot Arm to express a human's intention.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.8 no.4
• /
• pp.259-265
• /
• 2014

The aims of this study are to investigate the walking intention detection of a rollator based on Infraed (IR) sensor measuring knee joint anterior displacement and leg muscle activities. We used Active Walker attached IR sensor to measure the knee joint anterior displacement and EMG signal of leg muscles(rectus femoris, biceps femoris, tibialis anterior, gastrocnemius) were taken by Delsys bagnli-8ch. Subjects were eight healthy males(age $23.7{\pm}0.5years$, height $175.4{\pm}2.3cm$, weight $70.6{\pm}5.6kg$) and they were involved in experiments which had been proceeded 30 minutes a week, during 3 weeks. This system indicates that the knee joint anterior displacement had the distinction increases according to the gait slope and velocity. We showed the increase of the femoral muscle activities along the anterior tilt and the increase of the crural muscle activities along the posterior tilt.