• 제목/요약/키워드: EMF Safety Assessment

검색결과 8건 처리시간 0.022초

도시철도용 무선 급집전 시스템 주변의 전자기장 측정 방법 및 안전성 평가 방법 연구 (EMF Measurement and Safety Assessment Method for Wireless Power Transfer System for Urban Railroad)

  • 김윤명;김준희;주영준
    • 한국전자파학회논문지
    • /
    • 제29권12호
    • /
    • pp.942-952
    • /
    • 2018
  • 국내에서 개발되고 있는 도시철도용 무선 전달 공급 시스템은 60 kHz 자기장을 이용하여 객차에 전력을 공급한다. 무선 전력 전송 시 발생되는 전자기장에 인체가 노출될 때, 전자기장 세기는 인체 안전성 기준을 만족해야 한다. 하지만 도시철도용 무선 급집전 시스템에서 발생하는 전자기장에 대한 측정 방법과 인체 안전성 평가 방법이 아직 확립되지 않았다. 본 논문에서는 도시철도용 무선 급집전 시스템에서 발생되는 전자기장 측정 방법 및 인체 안전성 평가 방법을 제안하였다. 제안된 측정 방법에 따라 무선 급집전 시스템 시험선로에서 발생되는 전자기장을 측정하고, 전자기장 인체 보호기준치와 비교하였다.

극저주파 자계의 노출 평가에 대한 연구 (A Study on the Exposure Assessment of Extremely Low Frequency Magnetic Fields)

  • 김응식;김명훈;민석원
    • 한국안전학회지
    • /
    • 제32권1호
    • /
    • pp.33-40
    • /
    • 2017
  • This paper addresses the assessment methods used to evaluate the magnetic exposure of a human to ELF EMF (Extremely Low Frequency Electromagnetic Field) which is caused by the process of power delivery from 60 Hz commercial power. These days the main concern is primarily focused on the magnetic field. For the exposure assessment, both numerical studies and laboratory experiments were studied and the results of the two compared for methodological suitability. The numerical analyses employ the Impedance Method (IM), Boundary Element Method (BEM), and Finite Element Method (FEM) and the laboratory experiments used various human phantom models made with conductivities congruent to human organs and then exposed to uniform/non-uniform magnetic fields to produce eddy currents. Under these conditions a number of examples have been evaluated and the reliability assessed to present the pros and cons of each methodology.

직업인 전자파 노출 평가제도 연구 (Investigation of Occupational EMF Exposure Assessment System)

  • 전상봉;이애경;권용기;장주동;안준오;백정기;김윤명;최형도
    • 한국전자파학회논문지
    • /
    • 제28권11호
    • /
    • pp.843-852
    • /
    • 2017
  • 최근 WHO IARC에서 무선주파수 전자파를 발암 유발 가능 물질(2B 등급)으로 분류함에 따라 전자파로부터의 과다노출로 인한 건강 영향에 대한 우려가 증가하고 있다. 특히 직업인의 경우는 일반인에 비해 전자파에 더 많이 노출될 수밖에 없는 환경에서 근무하게 된다. 이로 인해 유럽에서는 직업인에 대한 전자파 인체보호를 위한 지침을 마련하여 직업인에 대해 엄격히 관리하고 있다. 본 논문에서는 EU의 직업인 보호 관련 법령, 표준 및 지침을 분석하고, 또한 실제 아크용접에 대한 직업인 전자파 노출 평가를 수행하였다. 이를 토대로 직업인 보호를 위한 국내 제도 도입 방안을 제시하였다.

2.4 GHz의 무선전력전송에 사용되는 4 × 8 배열 안테나에 대한 인체안전성평가 (Human Safety Assessment for a 4 × 8 Array Antenna Used for Wireless Power Transfer at 2.4 GHz)

  • 주영준;김준희;이유리;김윤명;임용석
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2018년도 추계학술대회
    • /
    • pp.338-341
    • /
    • 2018
  • Beam-forming 방식을 적용한 배열 안테나의 무선전력전송(WPT)은 송신기와 수신기를 접촉하지 않고 서로 떨어져도 높은 효율의 무선전력전송이 가능하다. 하지만 이 방식은 송신기와 수신기의 떨어진 거리에 따른 전자파에 대한 인체안전기준을 만족해야 사용할 수 있다. 본 논문에서는 시뮬레이션을 통해 2.4 GHz용 $4{\times}8$ 배열 안테나를 모델링하고 배열 안테나의 단일 안테나에 각각 1W의 2.4 GHz 정현파를 인가하여 배열 안테나로부터 떨어진 거리에 따른 전기장 세기 및 머리에 대한 10 gram 평균 SAR (Specific Absorption Rate)를 구하였다. 그리고 이 값들과 2018 ICNIRP (International Commission on Non-Ionizing Radiation Protection) 가이드라인 초안의 인체안전기준치와 비교하였다. 그 결과, 원거리장의 전기장 세기로부터 도출된 전력밀도가 $33.257W/m^2$로 직업인에 대한 전력밀도의 인체안전기준치는 만족하나 일반인에 대한 전력밀도의 인체안전기준치를 초과하였다. 10 gram 평균 SAR 또한 인체안전 기준치를 초과하였다.

  • PDF

A New Method to Estimate the Induced Electric Field in the Human Child Exposed to a 100 kHz-10 MHz Magnetic Field Using Body Size Parameters

  • Park, Young-Min;Song, Hye-Jin;Byun, Jin-Kyu
    • Journal of Magnetics
    • /
    • 제19권2호
    • /
    • pp.174-180
    • /
    • 2014
  • In this paper, a new and simple method is proposed to quickly estimate the induced electric field in the human child exposed to a 100 kHz-10 MHz magnetic field, for the sake of electromagnetic field (EMF) safety assessment. The quasi-static finite-difference time-domain (FDTD) method is used to calculate the induced electric fields in high resolution 3D human child models with various body size parameters, in order to derive the correction factor for the estimation equation. The calculations are repeated for various frequencies and incident angles of the magnetic field. Based on these calculation results, a new and simple estimation equation for the 99th percentile value of the body electric field is derived that depends on the body size parameters, and the incident magnetic field. The estimation errors were equal to or less than 5.1%, for all cases considered.

150 MHz 대역에서의 SAR 측정시스템의 유효성 연구 (A Study on the SAR Measurement System Validation at 150 MHz Band)

  • 최동근;김기회;최재훈
    • 한국전자파학회논문지
    • /
    • 제24권10호
    • /
    • pp.1008-1016
    • /
    • 2013
  • 한국전파법에서 휴대전화에만 적용되었던 전자파흡수율(SAR: Specific Absorption Rate) 측정 대상기기가 2012년 1월 이후 인체로부터 20 cm 이내에 위치하는 휴대용 송신 무선통신기기로 확대됨에 따라 150 MHz 대역의 무전기가 포함되어 이에 대한 SAR 적합성 평가를 위한 SAR 측정방법이 필요하다. 그러나 현재 SAR 측정방법에 대한 국제표준(IEC 62209-2)에서는 300 MHz 대역 이상의 주파수에 대해서 적용하고 있으며, 상용 SAR 측정시스템에서도 300 MHz 대역 이상의 주파수에 대해서만 측정이 가능하도록 되어 있는 실정이다. 본 논문에서는 150 MHz 대역의 SAR 측정 유효성 평가를 위한 기준 다이폴 안테나(복사체 길이: 760 mm, 반사 손실 : -25.48 dB) 및 평면형 모의인체의 크기($1,300 mm(L){\times}900 mm(W){\times}200 mm(H)$), 수치해석 SAR 목표값(1 g: 1.08 W/kg, 10 g: 0.77 W/kg)을 제시하였다. 제시된 기준 다이폴 안테나 및 평면형 모의인체를 제작하여 상용 SAR 측정시스템의 적합성 여부를 확인하였다. 측정된 1 g 및 10 g SAR 값은 각각 1.13 W/kg, 0.81 W/kg으로, IEC 국제 표준의 유효 범위인 ${\pm}10$ % 이내를 만족하였다. 본 연구를 통해 도출된 규격들은 국내 SAR 측정방법 및 IEC 국제 표준으로 반영될 수 있을 것으로 기대된다.

일부 용접공의 극저주파 자계노출평가 (Exposure Assessment of Welders to Extremely Low Frequency Magnetic Fields)

  • 정연준;홍승철
    • 한국산업보건학회지
    • /
    • 제24권4호
    • /
    • pp.509-517
    • /
    • 2014
  • Objectives: This study was conducted to investigate the patterns of exposure of welders to strong magnetic fields for extended periods of time on the basis of their daily activities as recorded in a logbook. Methods: Male workers whose main job is welding, specifically seven welders occupied with gas tungsten arc welding(GTAW), two performing shielded metal arc welding(SMAW), and ten engaged in gas metal arc welding(GMAW), were measured in terms of the degree to which they were exposed to extremely low frequency(ELF) magnetic fields over 24 hours by using an electromagnetic field meter(EMF meter), as well as based on a daily activity log. Results: The welders were exposed to $1.25{\pm}4.95{\mu}T$ of magnetic field per day on average. For those who spent more than half a day-735.26 minutes, or 51.1% of the day-at work, the figure averages $3.88{\pm}8.85{\mu}T$ with a maximum value of $221.28{\mu}T$. The subject welders spent $338.14{\pm}154.95$ minutes per day at home. During their stays at home, they were exposed to an average of $0.17{\pm}0.06{\mu}T$ with a maximum value of $3.50{\mu}T$. The maximum exposure of $221.28{\mu}T$ occurred when welders performed GMAW. The average exposure reached its highest at $17.71{\pm}6.96{\mu}T$ when conducting SMAW. Magnetic field exposure also depends upon posture: welders who sat while welding were exposed five times more than those who stood during work, and this difference is statistically significant. As for the relationship between distance from the welding power supply and maximum magnetic field exposure, maximum magnetic field exposure decreases as the distance increases. The average magnetic field exposure, in the meantime, showed no significant difference depending on distance. Conclusions: The following were observed through this study: 1) welders, while conducting jobs, are exposed to magnetic fields not only from the welding machine, but also from the surrounding base material due to the current flowing between the welding machine and base material, meaning that they are continuously exposed to a magnetic field; and 2) welders are more exposed to magnetic fields while they sit at a job compared to when they stand up.

835 MHz 및 1,800 MHz 대역에서 인체의 전기적 특성을 가지는 한국인 손 모양의 팬텀 제작 (Manufacturing of a Korean Hand Phantom with Human Electrical Properties at 835 MHz and 1,800 MHz Bands)

  • 최동근;김윤명;최재훈
    • 한국전자파학회논문지
    • /
    • 제24권5호
    • /
    • pp.534-540
    • /
    • 2013
  • 휴대전화의 이용이 증가하면서, 손에 미치는 전자파의 영향에 대한 관심이 증가하고 있다. IEC TC106에서도 휴대전화의 전자파 인체 노출량 평가 방법 표준에 손 영향을 반영하기 위하여 국제적인 교류 연구가 활발하게 진행되고 있다. 현재 상용화된 손 팬텀은 평균 서양인 손을 이용하고 있을 뿐만 아니라, 한 가지 형태의 파지(把持)만 가능하기 때문에, SAR 측정 결과에 대한 분석에 제한이 많은 실정이다. 손의 영향을 제대로 분석하기 위해서는 다양한 형태의 파지가 가능한 손 팬텀이 필요하다. 또한, 국내 환경에 맞는 손 팬텀의 개발이 필수적이다. 본 논문에서는 다양한 형태의 파지가 가능한 835 MHz 대역과 1,800 MHz 대역의 한국인의 젤리형 손 팬텀을 제작하였다. 제작된 손 팬텀의 전기적 특성은 비유전율과 도전율이 CTIA(미국이동통신산업협회) 권고 기준 값의 ${\pm}10%$이내로서, CTIA에서 제시하는 오차 기준(${\pm}20%$)보다 더 우수한 특성을 나타냈다. 또한, 손 팬텀의 3D CAD(3차원 컴퓨터 이용 설계) 파일을 개발하여 손에 의한 SAR 영향 분석을 위한 시뮬레이션에서 활용할 수 있도록 하였다. 본 연구를 통해 제작된 젤리형 손 팬텀과 3D 파일은 휴대 전화의 손 영향에 대한 연구에 유용하게 이용될 수 있을 것으로 본다.