• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2007년도 공동학술대회 논문집
• /
• pp.245-250
• /
• 2007

The small loop EM method is a fast and convenient geophysical tool which can give shallow subsurface resistivity distribution. It can be a useful alternative of resistivity method in conductive environment. We applied the multi-frequency small loop EM method for the investigation of a soft ground landfill site which was constructed on a tideland since the resistivity of the survey area is extremely low. 3D resistivity distribution was obtained by merging 1D inversion results and shallow subsurface structure can be interpreted. By comparing the result with the drilling log and measured soil resistivity sampled at 16 drill holes, we can get lot of information such as groundwater level, thickness of landfill, salinity distribution, depth to the basement and etc.

• 자원환경지질
• /
• 제31권1호
• /
• pp.53-57
• /
• 1998

Transient electromagnetic (TEM) method is also affected by cultural and natural electromagnetic (EM) noises, since it uses part of the broadband ($10^{-2}$ to $10^5Hz$) spectrum. Especially, predominant EM noise which affects a moving transmitter-receiver TEM system is sensor motion-induced noise. This noise is caused by the sensor motion in the earth magnetic field. The technique for reducing the sensor motion-induced EM noise presented in this paper is based on Halverson stacking. This Halverson stacking is generally used in a time-domain induced polarisation (IP) system to reject DC offset and linear drift. According to spectrum analysis of the vertical component of sensor motion-induced noise, the frequency range affected by the motion of an EM sensor is less than about 700 Hz in this study. With the decrease of the frequency, the spectral power caused by the motion of a sensor increases. For example, at the frequency of 200 Hz, the spectral power of the sensor motion-induced noise is $-90dBVrms^2$ while the spectral power of the EM noise measured with a fixed sensor on the ground is $-105dBVrms^2$, and at the frequency of 100 Hz, the spectral power of the sensor motion-induced noise is $-70dBVrms^2$ while the spectral power of the EM noise measured with a fixed sensor on the ground is $-105dBVrms^2$. With applying Halverson stacking to an artificial noise transient generated by adding a noise-free transient to sensor motion-induced noise measured without pulsing, it is shown that the filtered transient is nearly consistent with the noise-free transient within a delay time of $0.5{{\mu}sec}$. The inversion obtained from this filtered transient is in accord with the true model with an error of 5%.

• Journal of electromagnetic engineering and science
• /
• 제12권1호
• /
• pp.20-25
• /
• 2012

In this paper, the EM wave absorber for ETC system was designed and fabricated. We fabricated several samples in different composition ratios of flaked sendust and CPE(Chlorinated Polyethylene). Absorption abilities were simulated in accordance with different thicknesses of the prepared absorbers and changed complex relative permittivity and permeability according to composition ratio. The optimized mixing ratio of flaked sendust and CPE was found as 60 : 40 wt.% by experiments and simulation. Then the EM wave absorber was fabricated and tested using the simulated data. As a result, the developed EM wave absorber has the thickness of 2.75 mm and absorption ability was 22.5 dB in the case of normal incidence at 5.8 GHz. Therefore, it was confirmed that the newly developed absorber can be used for ETC system.

• 고려인삼학회:학술대회논문집
• /
• 고려인삼학회 2002년도 학술대회지
• /
• pp.317-334
• /
• 2002

Ginsenosides are metabolized (deglycosylated) by intestinal bacteria to active forms after oral administration. 20(S)-Protopanaxadiol $20-O-{\beta}-D-glucopyranoside$ (M1) and 20(S)-protopanaxatriol (M4) are the main intestinal bacterial metabolites (IBMs) of protopanaxadiol- and protopanaxatriol-type glycosides. M1 was selectively accumulated into the liver soon after its intravenous (i.v.) administration to mice, and mostly excreted as bile; however, some M1 was transformed to fatty acid ester (EMl) in the liver. EM1 was isolated from rats in a recovery dose of approximately $24mol\%.$ Structural analysis indicated that EM1 comprised a family of fatty acid mono-esters of M1. Because EM1 was not excreted as bile as Ml was, it was accumulated in the liver longer than M1. The in vitro cytotoxicity of M1 was attenuated by fatty acid esterification, implying that esterification is a detoxification reaction. However, esterified M1 (EM1) inhibited the growth of B16 melanoma more than Ml in vivo. The in vivo antitumor activity paralleled with the pharmacokinetic behavior. In the case of M4, orally administered M4 was absorbed from the small intestine into the mesenteric lymphatics followed by the rapid esterification of M4 with fatty acids and its spreading to other organs in the body and excretion as bile. The administration of M4 prior to tumor injection abrogated the enhanced lung metastasis in the mice pretreated with 2-chloroadenosine more effectively than in those pretreated with anti-asialo GMl. Both EM1 and EM4 did not directly affect tumor growth in vitro, whereas EM1 promoted tumor cell lysis by lymphocytes, particularly non-adherent splenocytes, and EM4 stimulated splenic NK cells to become cytotoxic to tumor cells. Thus, the esterification of IBM with fatty acids potentiated the antitumor activity of parental IBM through delay of the clearance and through immunostimulation. These results suggest that the fatty acid conjugates of IBMs may be the real active principles of ginsenosides in the body.

• Journal of electromagnetic engineering and science
• /
• 제8권3호
• /
• pp.110-113
• /
• 2008

In this paper, we designed and fabricated an electromagnetic(EM) wave absorber for automotive radar in cars using $TiO_2$ as a dielectric material and chlorinated polyethylene(CPE) as a binder. First of all, we confirmed that the optimum composition ratio of $TiO_2$ was about 70 wt.%. The complex relative permittivity of a sample containing $TiO_2$: CPE=70:30 wt.% was calculated from S-parameter. The EM wave absorption abilities were simulated for the EM wave absorbers of different thickness using the calculated relative permittivity, and the EM wave absorber was manufactured based on the simulated design. A comparison of simulated and measured results is in good agreement. Measurement shows that a 1.85 mm thick absorber has absorption ability higher than 20 dB in the frequency range of $76{\sim}77$ GHz for automotive radars.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 후기학술대회논문집
• /
• pp.67-68
• /
• 2005

This thesis is concerned with basic research for development of EM wave absorbers in sheet type for mobile phones. By controlling the sendust ratio, the $Al(OH)_3$ coating, the thickness, the kind of binders, EM wave absorbers were prepared and examined. Centeral frequency shifts toward lower with increasing thickness of the absorber, and absorption ability controlled to adjust Sendust amount. The absorption band of the EM wave absorber coated with $Al(OH)_3$ becomes larger than that of non-coated one. Sendust composite microwave absorbers mixed with CPE were prepared at $70^{\circ}C$ in temperature. The fabricated EM wave absorbers show a reflection coefficient 5.56 dB at 1.8 GHz in thickness of 0.85 mm.

• 지구물리와물리탐사
• /
• 제2권3호
• /
• pp.142-148
• /
• 1999

확장된 Born 근사법에 의한 반무한 공간에서의 전자탐사(EM) 3차원 모형반응 알고리듬을 개발하였다. 이 근사법의 정확성을 검토하기 위하여 수직 자기쌍극자(VMD, vertical magnetic dipole)원을 사용하여 자기장의 수평 및 수직성분에 대한 확장된 Born 근사법의 결과를 적분방정식법의 결과와 비교하였다. 그 결과 확장된 Born 근사법과 적분방정식법은 송신원의 주파수가 20 kHz보다 작고 전도도비가 1:10이하에서 정확한 결과를 보였다. 이보다 더 큰 전도도비를 갖는 경우 확장된 Born 근사법의 결과는 적분방정식법의 결과와 약간의 차이를 나타낸다. 따라서, 확장된 Born 근사법의 정확한 결과를 얻기 위해서는 전도도비가 1:10보다 작은 범위에 있어야 한다. 그러나 20 kHz부터 100 kHz의 송신원의 주파수 범위에서는 두 값의 차가 비교적 작기 때문에 확장된 Born 근사법은 EM 3차원 모형반응 알고리듬으로 사용 가능한 것으로 판단된다.

• 지구물리와물리탐사
• /
• 제1권3호
• /
• pp.155-160
• /
• 1998

확장된 Born 근사법을 사용하는 2.5차원 EM 모델링 알고리듬을 이용하여 2차원 역산에 근거한 EM 토모그래피 기법을 개발하였다. 역산법은 평활화 제한을 가한 감쇠최소자승법을 사용하였으며, 측정값은 2차 자기장의 수직성분으로 제한하였다. 적분방정식법에 근거한 3차원 EM 모델링 프로그램을 이용하여 단순한 형태를 갖는 모형에 대한 이론 자료를 계산하고, 이 자료를 측정값으로 EM 토모피래피 영상을 획득하였다. 거의 모든 경우에 EM 토모그래피 영상은 이상체의 위치는 비교적 정확히 추정하였으나, 전도도는 실제 값보다 상당히 낮게 추정하였다. 해상도 분석결과 수직해상도가 수평해상도에 비하여 월등히 뛰어난 것으로 나타났다.

• 한국식품영양학회지
• /
• 제32권6호
• /
• pp.620-629
• /
• 2019

To examine the possibility of ear mushroom (EM) as a source of natural vitamin D, the UVB (ultraviolet B) was treated according to sample drying status, drying methods before UVB treatment and harvest time. And then, vitamin D₂ and ergosterol contents were investigated. According to the sample drying status, the vitamin D₂ contents of fresh and freeze-dried EM (whole) increased to 4,634.4~4,780.9 ㎍/100 g D.W. (dry weight) under UVB dose 52.5~70.0 kJ/㎡ and above 18,693.1 ㎍/100 g D.W. under above 105 kJ/㎡, respectively. By drying methods before UVB treatment, vitamin D₂ contents of EM powder (below 500 ㎛) that dried in the vinyl house and freeze-dryer increased to 4,886.2~5,132.9 ㎍/100 g D.W. under above 105 kJ/㎡ and 17,103.7 ㎍/100 g D.W. under 70 kJ/㎡, respectively. Ergosterol content decreased with increasing UVB dose in all experiments. According to the harvest time, vitamin D₂ content under UVB dose 210 kJ/㎡ showed marked difference and in order of June, July, August, October and April. As for the results, the optimum harvest time, drying method before UVB treatment, sample size, UVB dose for the EM contained high vitamin D₂ content were June, freeze-drying, whole, and 105 kJ/㎡, respectively.

• 지구물리와물리탐사
• /
• 제3권1호
• /
• pp.13-18
• /
• 2000

적분방정식 전자탐사 모델링에서 종종 애매모호하게 받아 들여온 특이 요소에 대한 Green 텐서 적분을 명확히 해결하고자, 전자탐사 적분방정식에서의 특이치의 개념을 전자기 이론에서 사용되는 전기장의 적분식 표현에서의 특이치 문제와의 비교를 통해 설명하였다. 또한 적분방정식 전자탐사 모델링에서 수치해의 정확도를 좌우하는 가장 중요한 요소인 특이 적분을 3차원, 2.5차원 및 2차원, 그리고 얇은 판 적분방정식의 경우에 대해 유도하고 정리하였다.