• Journal of dental hygiene science
• /
• v.22 no.3
• /
• pp.191-198
• /
• 2022

Background: The purpose of this study was to evaluate the composition of the crystal phases of various calcium silicate-based materials (CSMs): ProRoot white MTA^Ⓡ (mineral trioxide aggregate) (WMTA), Ortho MTA^Ⓡ (OM), Endocem MTA^Ⓡ (EM), Retro MTA^Ⓡ (RM), Endocem Zr^Ⓡ (EN-Z), Biodentine^TM (BD), EZ-seal^TM (EZ), and OrthoMTA III (OM3). Methods: In a sample holder, 5 g of the powder sample was placed and the top surface of the material was packed flat using a sterilized glass slide. The prepared slides were mounted on an X-ray diffraction (XRD) instrument (D8 Advance; Bruker AXS GmbH, Germany). The X-ray beam 2θ angle range was set at 10~90° and scanned at 1.2° per minute. The Cu X-ray source set to operate at 40 kV and 40 mA in the continuous mode. The peaks in the diffraction pattern of each sample were analyzed using the software Diffrac (version 2.1). Then, the peaks were compared and matched with those of standard materials in the corresponding Powder Diffraction File (PDF-2, JCPDS International Center for Diffraction Data). A powder samples of the materials were analyzed using XRD and the peaks in diffraction pattern were compared to the Powder Diffraction File data. Results: Eight CSMs showed a similar diffraction pattern because their main component was calcium silicate. Eight CSMs showed similar diffraction peaks because calcium silicate was their main component. Two components were observed to have been added as radiopacifiers: bismuth oxide was detected in WMTA, OM, and EM while zirconium oxide was detected in RM, EN-Z, BD, EZ, and OM3. Unusual patterns were detected for the new material, OM3, which had strong peaks at low angles. Conclusion: It was caused by the presence of Brushite, which is believed to have resulted in crystal growth in a particular direction for a specific purpose.

• Journal of Software Engineering Society
• /
• v.24 no.3
• /
• pp.111-115
• /
• 2011

With the emergence of the smart grid era, the interest in green energy which reduce carbon emissions and environment-friendly smart grid which combines the advantages of power and IT technology is increasing around the world. To use the smart grid effectively heterogeneous systems such as EMS, MOS and WIS must be linked together. However, additional interface should be developed to link EMS and heterogeneous systems since IEC has only defines the interface for EMS. Especially, to link legacy system and new system, some software might need to be designed and developed because separate interfaces for connection can be developed depending on each system and environment. In this paper, we propose an integrated interface based on CIM for interconnection between systems. A proposed interface can integrate messages of heterogeneous system and will be able to reduce costs that could be incurred by the removal of the existing system and the addition of the new system.

• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.11
• /
• pp.537-542
• /
• 2017

Aggressive driving is a major cause of car accidents. Previous studies have mainly analyzed young driver's aggressive driving tendency, yet they were only done through pure clustering or classification technique of machine learning. However, since elderly people have different driving habits due to their fragile physical conditions, it is necessary to develop a new method such as enhancing the characteristics of driving data to properly analyze aggressive driving of elderly drivers. In this study, acceleration data collected from a smartphone of a driving vehicle is analyzed by a newly proposed ECA(Enhanced Clustering method for Acceleration data) technique, coupled with a conventional clustering technique (K-means Clustering, Expectation-maximization algorithm). ECA selects high-intensity data among the data of the cluster group detected through K-means and EM in all of the subjects' data and models the characteristic data through the scaled value. Using this method, the aggressive driving data of all youth and elderly experiment participants were collected, unlike the pure clustering method. We further found that the K-means clustering has higher detection efficiency than EM method. Also, the results of K-means clustering demonstrate that a young driver has a driving strength 1.29 times higher than that of an elderly driver. In conclusion, the proposed method of our research is able to detect aggressive driving maneuvers from data of the elderly having low operating intensity. The proposed method is able to construct a customized safe driving system for the elderly driver. In the future, it will be possible to detect abnormal driving conditions and to use the collected data for early warning to drivers.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.4
• /
• pp.468-474
• /
• 2006

Real time ultrasound data was generated on 10,596 live Hanwoo cows to study genetic variation on ultrasonic beef quality traits and to assess the best model to estimate genetic parameters on these traits. Pedigree stacking and data validation was done using the SAS statistical software and the genetic parameter estimates were obtained by EM-REML algorithm. Out of the five different multi-trait mixed animal models constructed, the optimal model included fixed effects of herd, year-season-appraisal, body condition score, linear and quadratic covariates for chest girth, the linear covariate effect of age and the random animal and residual effect of the five models studied. The heritability of longissimus muscle area (LMA), $12^{th}$ rib measurement of back fat thickness (BF) and marbling score (MS) was 0.11, 0.17 and 0.15, respectively. Genetic correlation of LMA vs. BF, LMA vs. MS and BF vs. MS was -0.15, 0.06 and 0.61, respectively. The results showed presence of genetic variation in these ultrasonic beef quality traits in Hanwoo cows and suggest that the selection of Hanwoo cows may be possible by performing ultrasonic scans on live animals, which will ultimately be helpful in reducing the generation interval and the cost of selection procedure.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.10
• /
• pp.1021-1030
• /
• 2009

We propose optimization method of two-inductor loaded small loop antennas using simple genetic algorithm. To optimize the loop antennas for the RFID and the mobile phone band, we changed positions and values of the two inductors in the loop antenna. Visual basic was used to make genetic algorithm and to calculate fitness values by controlling the commercial EM software. The bandwidth of the optimized RFID loop antenna is 10 MHz at the center frequency of 922 MHz and that of the mobile phone antenna are 84 MHz and 266 MHz at the center frequency of 948 MHz(GSM band) and 1.81 GHz(DCS band), respectively.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.2
• /
• pp.786-799
• /
• 2018

Recently, NFV has attracted attention as a next-generation network virtualization technology for hardware -independent and efficient utilization of resources. NFV is a technology that not only virtualize computing, server, storage, network resources based on cloud computing but also connect Multi-Tenant of VNFs, a software network function. Therefore, it is possible to reduce the cost for constructing a physical network and to construct a logical network quickly by using NFV. However, in NFV, when a new VNF is added to a running Tenant, authentication between VNFs is not performed. Because of this problem, it is impossible to identify the presence of Fake-VNF in the tenant. Such a problem can cause an access from malicious attacker to one of VNFs in tenant as well as other VNFs in the tenant, disabling the NFV environment. In this paper, we propose Auto-configurable Security Mechanism in NFV including authentication between tenant-internal VNFs, and enforcement mechanism of security policy for traffic control between VNFs. This proposal not only authenticate identification of VNF when the VNF is registered, but also apply the security policy automatically to prevent malicious behavior in the tenant. Therefore, we can establish an independent communication channel for VNFs and guarantee a secure NFV environment.

• Journal of Korea Multimedia Society
• /
• v.23 no.2
• /
• pp.351-360
• /
• 2020

If various unreasonable safety standards are preemptively and effectively readjusted, the risk of accidents can be reduced. In this paper, we proposed a machine reading comprehension-based safety standard Q&A system to secure supporting technology for effective search and analysis of safety standards for integrated and systematic management of safety standards. The proposed model finds documents related to safety standard questions in the various laws and regulations, and then divides these documents into provisions. Only those provisions that are likely to contain the answer to the question are selected, and then the BERT-based machine reading comprehension model is used to find answers to questions related to safety standards. When the proposed safety standard Q&A system is applied to KorQuAD dataset, the performance of EM 40.42% and F1 55.34% are shown.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.1
• /
• pp.104-109
• /
• 2012

In this paper, we propose a way to improve the quality of L-band wireless communication from unfriendly influential factors lying in the neighboring RF bands. The UHF-band system has resonator components and they generate harmonics as the spurious in the L-band. Therefore, a metamaterial CRLH bandpass filter is designed for the purpose of system miniaturization and smaller insertion loss, and its spurious phenomenon is observed in the frequency domain. And its harmonics in the L-band are suppressed by a compact bandstop filter whose equivalent circuit is newly developed. The design methodology is validated by the equivalent circuit to be compared with commercial full-wave EM software simulations, where the spurious is dropped by 20dB. Also, the advantage of the proposed design is presented by the comparison where our filter is much smaller than the conventional parallel edge coupled filter by over 50%, with excellent harmonic suppression.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.4
• /
• pp.97-101
• /
• 2021

In this study, Insertion loss according to the structural variant of interposer to Through Silicon Via (TSV) and Redistributed Layer (RDL) was studied through design of experiment. 3-Factors was considered as a variant, TSV depth, TSV diameter, RDL width with factor arrangement method and the response surface method from 400 MHz to 20 GHz. As a result, it was confirmed that as the frequency increased, the effect of RDL width was decreased and the effect of TSV depth and TSV diameter was increased. Also within the analysis range, to increasing RDL width, decreasing TSV depth, and fixing TSV diameter about 10.7 ㎛ was observed optimal result of Insertion loss.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.13 no.3
• /
• pp.295-301
• /
• 2008

Bathymetric data collected using a multi-beam echo sounder during marine scientific survey is essential for geologic and oceanographic research works. Accurate measurment of sound velocity profile(SVP) in water-column is important for bathymetric data processing. SVP can vary at different locations during the survey undertaken for wide areas. In addition, an observational error can occur when different equipments(Sound Velocity Profiler, Conductivity Temperature Depth, eXpendable BathyThermograph) are used for measuring SVP at the same water column. In this study, we used an MB-system software to show changes in bathymetry caused by variation of SVP. The analyses showed that the sound velocity(SV) changes due to the depth and thickness of thermocline had more significant effects on the resulting bathymetric data than those of surface mixed layer. The observational errors between SVP measuring instruments did not cause much differneces in the processed bathymetric data. Bathymetric survey line is better to be established to the direction that the change of temperature can be minimize to reduce the variation of SVP during the data acquisition along the survey line.