• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1629-1631
• /
• 2007

Significant process in the performance and commercialization of full-color thin-film electroluminescent(EL) displays has been achieved. This is due to the remarkable progress made in the performance of exiting EL phosphors, development of new phosphor materials, and design of new EL phosphor structures. In this paper, we fabricated thinfilm EL devices with ZnS buffer and $BaTiO_3$ electric layer with on top and bottom of phosphor layer. The effect of ZnS and $BaTiO_3$ layer on the luminance of EL device were studied.

• Journal of the Korean institute of surface engineering
• /
• v.29 no.5
• /
• pp.449-453
• /
• 1996

In order to improve EL performance, anthracene was doped into the 8-hydroxyquinoline-aluminum (Alq$^3$) light-emitting layer of organic double layered EL cells. The EL cells were fabricated on ITO glass substrates by vacuum deposition. Doping of anthracene to the light-emitting $Alq^3$layer was performed by means of co-evaporation. The doping concentration was changed in the range of 5 to 30 wt.%. It was confirmed that anthracene doping of appropriate concentration increased the available current density and brightness of the EL cells. Carrier mobility of the $Alq^3$ layer was measured by time of flight method. The influence of anthracene doping on the cell performance was discussed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.351-354
• /
• 2006

We developed highly efficient fluorescent dopants for full-color OLEDs. For blue, green and red OLEDs, current efficiencies of 8.7cd/A, 20.5 cd/A and 11.4 cd/A at $10mA/cm^2$ were achieved, respectively. Lifetime of the blue device was estimated to be 23,000hours at an initial luminance of $1,000cd/m^2$. Moreover, long lifetime over 100,000 hours was estimated in the green and red devices. Furthermore, we obtained a three-component white OLED by using these new fluorescent materials. This white OLED shows a current efficiency of 16.1cd/A with extrapolated lifetime over 70,000 hours at $1,000cd/m^2$, and more excellent color reproducibility for full-color displays with color filters and general lighting, compared to previous fluorescent white OLEDs.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.3
• /
• pp.65-74
• /
• 2006

This study was attempted to Kinematical characteristics of the Endo $360^{\circ}$El-grip Swing on the horizontal bar. To do this, we selected and analyzed the performance of two athletes who did Endo $360^{\circ}$El-grip Swing in the horizontal bar competition of male artistic gymnastic in the 22nd Universiad Games 2003 Daegu. We drew the conclusions from the kinematical factors that were came out through analyzing three-dimensional cinematography of the athletes' movements, by using two video cameras. In point of analyzing the actual competition situation, it is expected that gymnastics and coaches have the effective informations, and the following conclusion had resulted. 1. When performing Endo $360^{\circ}$El-Grip, the average for entire required time was $1.93{\pm}0.06sec$. The average for descent phase time was $0.24{\pm}0.02sec$, ascent phase time was 0.22${\pm}0.07sec$, connecting phase time was $0.87{\pm}0.07sec$, and El-Grip phase time was $0.61{\pm}0.02sec$. The descent phase need short period of time but however to have a stable performance, ensuring ascent and connecting phase time are needed. El-Grip phase need short period of time to have a stable re-grasp. 2. To have a convenient preparation for El-Grip in descent and ascent phase, lowering CM, and ease up in sway and plunge from the High Bar would make descent and ascent even more faster and would have increase effect in trunk rotation. 3. In descent and ascent phase, if shoulder angle and arm slope is dwindling then it would effect rotation angle so might risk it from hitting a Bar when putting legs in and out. 4. In connecting phase, it requires some time to show stable performance when El-Grip phase is continued by using hip angle which would make trunk rotation angle bigger and make descent and ascent time slower. 5. In El-Grip phase, when doing motions like hand standing. using hip angle more than maximum would make CM even faster and it is stable position while performing.

• Journal of Climate Change Research
• /
• v.34 no.20
• /
• pp.8257-8271
• /
• 2021

This study presents the ability of seasonal forecast models to represent the observed midlatitude teleconnection associated with El Niño-Southern Oscillation (ENSO) events over the North American region for the winter months of December, January, and February. Further, the impacts of the associated errors on regional forecast performance for winter temperatures are evaluated, with a focus on 1-month-lead-time forecasts. In most models, there exists a strong linear relationship of temperature anomalies with ENSO, and, thus, a clear anomaly sign separation between both ENSO phases persists throughout the winter, whereas linear relationships are weak in observations. This leads to a difference in the temperature forecast performance between the two ENSO phases. Forecast verification scores show that the winter-season warming events during El Niño in northern North America are more correctly forecast in the models than the cooling events during La Niña and that the winter-season cooling events during El Niño in southern North America are also more correctly forecast in the models than warming events during La Niña. One possible reason for this result is that the remote atmospheric teleconnection pattern in the models is almost linear or symmetric between the El Niño and La Niña phases. The strong linear atmospheric teleconnection appears to be associated with the models' failure in simulating the westward shift of the tropical Pacific Ocean rainfall response for the La Niña phase as compared with that for the El Niño phase, which is attributed to the warmer central tropical Pacific in the models. This study highlights that understanding how the predictive performance of climate models varies according to El Niño or La Niña phases is very important when utilizing predictive information from seasonal forecast models.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.68-68
• /
• 2010

Electroluminescence (EL) characteristics of green-emission ZnS:Cu,Cl-based ac-type inorganic powder electroluminescent structures were examined by inserting carbon nanotubes (CNTs) into or next to the dielectric layer. For the top-emission type EL structure, where the luminescent light was emitted from the top of the structure, was fabricated by assembling in order, a top electrode, an emitting layer, a dielectric layer, and a bottom electrode from the top. $BaTiO_3$ powder mixed with CNTs was used as a dielectric layer or CNTs were deposited between the bottom electrode and $BaTiO_3$ dielectric layer in order to improve the role of the dielectric layer in the structure. Luminance of an EL structure with CNTs inclusion was greatly enhanced possibly due to the high dielectric constant in the dielectric layer of $BaTiO_3$/CNTs, which is one of hot research topics utilizing nano-objects for intensifying dielectric constant and reducing dielectric loss at the same time. A variation on the CNTs themselves and their inclusion methods in the dielectric layer has been exhorted, and the underlying mechanism for the role of CNTs in the EL structure will be explained in the poster. In order to extend the flexibility of EL devices, EL devices were fabricated on the paper substrate and their performance was compared other EL devices on the plastic-based substrate.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.12
• /
• pp.1267-1271
• /
• 2012

Demand for optical glass device used for lighting could increase rapidly because of LED lighting market growth. The optical glass devices that have been formed by hot press molding process the desired optical performance without being subjected to mechanical processing such as curve generation or grinding. EL-Max material has been used for many engineering applications because of their high wear resistance, high compressive strength, corrosion resistant and very good dimensional stability. EL-Max is very useful for a glass lens mold especially at high temperature and pressure. The performance and reliability of optical components are strongly influenced by the surface damage of EL-Max during grinding process. Therefore, the severe process condition optimization shall be necessary for the highly qualified EL-Max glass lens mold. To get the required qualified surface of EL-Max, the selection of type of the diamond wheel is also important. In this paper, we report best grinding conditions of ultra-precision grinding machining. The grinding machining results of the form accuracy and surface roughness have been analyzed by using Form Talysurf and NanoScan.

• Journal of Electrochemical Science and Technology
• /
• v.4 no.2
• /
• pp.47-56
• /
• 2013

Inhibition performance of Lornoxicam & Tenoxicam against corrosion of carbon steel in 1M $H_2SO_4$ solutions was investigated by weight loss, potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) measurements. The inhibition efficiency increased with increasing inhibitor's concentration, but decreased with increase in temperature. Potentiodynamic polarization curves showed that, the inhibitors were of mixed type. The apparent activation energy ($E^*_a$) and other thermodynamic parameters for the corrosion process have also been calculated and discussed. The inhibition of carbon steel corrosion is due to the adsorption of the inhibitor molecules on the surface, which follows Temkin adsorption isotherm. The mechanism of inhibition was discussed in the light of the chemical structure of the undertaken inhibitors.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.1
• /
• pp.51-62
• /
• 2003

This study was attempted to kinematical characteristics of the El-grip swing with 1turn to el-grip in elite horizontal bar for the purpose of improving performance. The subjects were three males who were 2002 Busan Asian Games in men's team. The three dimensional motion analysis with DLT method was executed using three video cameras of analyzing the actual competition situation. In point of analyzing the actual competition situation, it is expected that gymnastics and coaches have the effective informations, and the following conclusion had resulted. 1. In case of release, It is impotant to make fast horizontal velocity of CM, high vertical position of CM, large hip and shoulder angle. Also It should be performed release motion of trunk rotation angle(+). 2. During LHR the action should be made at higher position than the CM and the shoulder joint is moving within $127{\pm}16.82$. It is important to make large lunk rotation angle. 3. During Hop, the RHR motion should be done in high position with short time and fast twisting action and to reduce the vertical speed is important.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.2
• /
• pp.271-276
• /
• 2017

The triple-gate tunnel FETs encapsulated with an epitaxial layer (EL TFETs) is proposed to lower the subthreshold swing of the TFETs. Furthermore, the band-to-band tunneling based on the maximum electric-field can occur thanks to the epitaxial layer wrapping the Si fin. The performance and mechanism of the EL TFETs are compared with the previously proposed TFET based on simulation.