• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.68-68
• /
• 2010

Electroluminescence (EL) characteristics of green-emission ZnS:Cu,Cl-based ac-type inorganic powder electroluminescent structures were examined by inserting carbon nanotubes (CNTs) into or next to the dielectric layer. For the top-emission type EL structure, where the luminescent light was emitted from the top of the structure, was fabricated by assembling in order, a top electrode, an emitting layer, a dielectric layer, and a bottom electrode from the top. $BaTiO_3$ powder mixed with CNTs was used as a dielectric layer or CNTs were deposited between the bottom electrode and $BaTiO_3$ dielectric layer in order to improve the role of the dielectric layer in the structure. Luminance of an EL structure with CNTs inclusion was greatly enhanced possibly due to the high dielectric constant in the dielectric layer of $BaTiO_3$/CNTs, which is one of hot research topics utilizing nano-objects for intensifying dielectric constant and reducing dielectric loss at the same time. A variation on the CNTs themselves and their inclusion methods in the dielectric layer has been exhorted, and the underlying mechanism for the role of CNTs in the EL structure will be explained in the poster. In order to extend the flexibility of EL devices, EL devices were fabricated on the paper substrate and their performance was compared other EL devices on the plastic-based substrate.

• 대한전자공학회논문지SD
• /
• 제37권6호
• /
• pp.17-23
• /
• 2000

본 연구에서는 Sq색소를 이용하여 적색발광의 디바이스를 제작하고, 발광효율을 증가시키기 위해 OXD7과 $Alq_3$층을 발광층과 음극사이에 삽입하여 그 효과를 관측하고, 기구특성을 검토하였다. 정공운송층으로서 TPD, 발광층 호스트재료로서 $Alq_3$, 게스트 재료로서 Sq를 사용하였다. 그 결과 $Alq_3$층의 삽입은 효율을 증가시킬 수 있었지만, 삽입된 $Alq_3$층에서의 발광 때문에 색순도 높은 적색발광을 얻지 못했다. OXD7층의 삽입은 정공을 블로킹하고 정공을 누적시킨다. 이는 전자와 정공의 재결합확률을 증가시키기 때문에 색순도 높은 적색발광을 유지하면서 휘도 특성과 발광효율이 향상되었다.

• 한국재료학회지
• /
• 제10권4호
• /
• pp.290-294
• /
• 2000

ZnS:Mn TFEL device를 전자선 진공증착법으로 제작하여 전기광학적 특성에 관하여 조사하였다. $Ta_2O_5$ 박막의 산소 결핍에 따른 정전용량을 측정하기 위하여 산소분위기에서 열처리에 따른 AES(Auger electron spectroscopy)와 C-F를 측정하였다. 제작한 EL 소자의 전기장 발광 파장은 550~650nm 였으며 이것은 $Mn^{2+}$ 이온의 $3d^5$ 여기준위인 $^4T_1(^4G)$ 에서 $3d^5$ 기저준위인 $^6A_1(^S)$로의 내각전자전이 피크이다. 열처리를 수행하지 않은 $Ta_2O^5$를 절연층으로 사용한 EL 소자의 발광시작전압은 24~28V이고 색도 좌표값 X=0.5151, Y=0.4202인 황등색 발광을 하였다. $Ta_2O_5$를 절연층으로 사용한 소자가 저전압에서 구동이 가능하므로 EL 소자의 실용화가 기대된다.

• Journal of Information Display
• /
• 제2권3호
• /
• pp.1-5
• /
• 2001

The effect of doping on the energy transfer and charge carrier trapping processes has been studied in organic light-emitting diodes (OLEDs) doped with a fluorescent laser dye. The devices consisted of N,N'-diphenyl-N,N'-bis(3-methylphenyl)-1,1-biphenyl-4,4'-diamine (TPD) as a hole transporting layer, tris(8-hydroxyquinoline) aluminum ($Alq_3$) as the host, and a fluorescent dye, 4-dicyanomethylene-2-methyl-6-[2-(2,3,6,7-tetrahydro-1 H,5H-benzo[i,j]quinolizin-8-yl) vinyl]-4H-pyran) (DCM2) as the dopant. Temperature dependence of the current-voltage-luminescence (I-V-L) characteristics, the electroluminescence (EL) and photoluminescence (PL) spectra are studied in the temperature ranging between 15 K and 300 K. The emission from DCM2 was seen to be much stronger compared with the emission from $Alq_3$, indicative of efficient energy transfer from $Alq_3$ to DCM2. In addition, the EL emission from DCM2 increasd with increasing temperature while the emission from the host $Alq_3$ decreased. The result indicates that direct charge carrier trapping becomes efficient with increasing temperature. The EL emission from DCM2 shows a slightly sublinear dependence on the current density, implying the enhanced quenching of excitons at high current densities due to the exciton-exciton annihilation.

• 한국전기전자재료학회논문지
• /
• 제11권10호
• /
• pp.897-902
• /
• 1998

We prepared Organic LED with a two layer structure by vacuum evaporation. The diode consisted of hole transfer layer (thickness of 30, 50, 70 nm) and electron transfer layer (thickness of 70, 50, 30 nm) material, which was N, N'-diphenyl- N, N'-bis-(3-methyl phenyl)-1,1'-diphenyl-4,4'-diamine)(TPD) and tris(8-hydroxy quinoline) aluminum(Alq3), respectively. We investigated EL properties of the LED with various thickness and cathode electrode. The best results were obtained when thickness of the electron layer is equal to that of emission layer and when AlLi alloy was used as a cathode. The EL intensity, luminance and efficiency of organic LED with equal of layer thick were improved seven, three and two times, respectively. Alq3 was ionized by carrier injection from cathode and could produce exitons. After electron-hole pairs were formed by combination of the electrons and holes at the emission layer, Alq3 layer emitted light.

• E2M - 전기 전자와 첨단 소재
• /
• 제8권6호
• /
• pp.752-758
• /
• 1995

Red emitting CaS:Eu,S electroluminescent(EL) device prepared at 550.deg. C by an electron-beam evaporation technique, demonstrated luminance of 175cd/m$\^$2/ and efficiency of 0.311m/W with 3kHz drive. Luminance was increased with the increase of applied voltage and frequency. From the results of the PL spectrum and the EL spectrum, the CaS:Eu, S device showed emission peak near 640nm resulted from the transition of EU$\^$2+/ 4f$\^$6/5d.rarw.4f$\^$7/. The capacitance of the phosphor layer from the Sawyer-Tower circuit was 10.5nF/cm$\^$2/.

• 센서학회지
• /
• 제8권2호
• /
• pp.177-183
• /
• 1999

동일한 발광기능기를 가진 고분자물질, PU-BCN과 저분자물질 D-BCN은 다양한 구조의 EL소자에서 평가되었다. 발광기능기의 분자구조는 전자주입과 수송을 위한 두 개의 시아노기와 정공주입과 수송을 위한 두 개의 triphenylamin기로 구성된다. 두 개의 다른 종류의 물질인 PU-BCN과 D-BCN을 사용하여 다양한 종류의 EL소자가 만들어 졌는데 소자의 종류로는 Indium-tin oxide(ITO)/PU-BCN or D-BCN/MgAg 로 구성된 단층형 소자(SL) 그리고 ITO/PU-BCN or D-BCN/oxadiazole derivative/MgAg로 구성된 적층형 소자(DL-E) 그리고 OTO/triphenylamine derivative/D-BCN/MgAg 로 구성된 적층형 소자(DL-H)이다. 두종류의 물질, PU-BCN과 D-BCN은 높은 전류밀도에서 동일한 발광특성을 보였으며 단층형자에서 조차 뛰어난 EL특성을 보였다. 최대 EL 피이크는 약 640 nm 의 적색발광을 나타냈으며 형광 피이크와 일치했다.

• 한국재료학회지
• /
• 제9권6호
• /
• pp.564-568
• /
• 1999

The 8-hydroxyquinoline Zinc(Znq2) were prepared successfully from zinc chloride and zinc acetate as two kinds of starting material. The organic electroluminescent devices(ELDs) were fabricated by the structure of ITO/TPD/Znq2/Al with N-N'-diphenyl-N-N'-bis(3-methylphenyl)-1,1'-biphenyl-4,4'-diamine(TPD) which acts hole trasporting layer and bis(8-oxyquinolino) zinc(II)(Znq2) which acts as emission and electron transporting layer. EL efficiency of Znq2 prepared by heating was investigated. The 570nm of main emission peak which is yellowich green was investigated by photo luminesence(PL) and this results shows that electro luminescence(EL) is from Znq2. The V-J curve shows that carrier injection were investigated from 4V. Maximum luminance and luminance efficiency were 1600cd/$\m^2$, 0.9lm/W. From this results, the Znq2 can be one of the useful organic EL material.

• 한국응용과학기술학회지
• /
• 제21권1호
• /
• pp.24-30
• /
• 2004

New electroluminescent materials based on anthracene chromophore with naphthylethenyl substituent, 9,10-bis($\alpha$-naphthylethenyl)anthracene (a-BNA), as well as four kinds of its derivatives were synthesized, and luminescent properties of these materials were investigated. Electrolumineecent(EL) emission band was discussed based on their substituent structure differences. It was found that the emission band strongly depends on the molecular structure of introduced substituent. It can be tuned from 557 nm to 591 nm by changing the substituent structures. On the other hand, the anthracene chromophore with bulky substituent possessed high melting point and they gave stable films through vacuum-sublimation. The double layer EL device of ITO/TPD/emission layer/Mg:Ag was employed, and exhibited efficient orange light originating from emitting materials. EL emission with a maximum luminance was observed in the b-BNA emitting material, : maximum luminance was about 8,060 cd $m^{-2}$ at an applied voltage of 10 V and current density of 680 $mA/cm^2$. In conclusion, the electroluminescent properties also showed good difference with their substituent structure.

• 한국전기전자재료학회논문지
• /
• 제15권5호
• /
• pp.429-434
• /
• 2002

In this paper, multiheterostructure white organic light-emitting device was fabricated by vacuum evaporation. The structure of white organic light-emitting device is ITO/CuPc/TPD/DPBi:DPA/$Alq_3/Alq_3$:DCJTB/BCT/$Alq_3$/Ca/Al. Three primary colors are implemented with DPVBi, Alq$_3$and DCJTB. The maximum EL wavelength of the fabricated white organic light-emitting device is 647nm. And the CIE coordinate is (0.33, 0.33) at 13 V. In the fabrication of white organic light-emitting devices with DCJTB, $Alq_3$, DPVBi, the EL spectrum has two peaks at 492nm, 647nm. Two peaks appeared because the blue light is combined with green light. The maximum wavelength of red light is not changed with applied voltage. After voltage applied, for the first time, the electrons met the holes in the red emission layer and emitted red light. And then the electrons moved to the green emission layer, and blue emission layer continuously. Finally, when all of the emission layer activated, the white light is emitted.