• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1563-1565
• /
• 1997

Electroluminescence(EL)devices based on organic thin layers have attracted lot of interests because of their possible application as large-area light-emitting display. One of the problems of such devices is lifetime of the cell, where the degradation of the cell is partially due to the crystalliyzation of organic layers. In large part, this problem can be solved by using a multilayer device structure prepared by vapor deposition technique. In this study, blue lightemitting multilayer organic electroluminescence devices were fabricated using Poly (9-vinyl-carbazole) (PVK) and 2-(4'-tert-butylpheny])-5-(4"-bis-phenyl)1,3,4-oxadiazole (PBD) as hole trasport and electron transport material, respectively, where tris(8-hydroxyquinolinate) aluminum (Alq3) was used as a luminescenct material. A cell structure of glass substrate/indume-tin-oxide(ITO)/PVK/$Alq_3$/PBD/Mg:In was employed.

• Journal of the Korean Ceramic Society
• /
• v.54 no.6
• /
• pp.449-469
• /
• 2017

The development of quantum dots (QDs) has had a significant impact on various applications, such as solar cells, field-effect transistors, and light-emitting diodes (LEDs). Through successful engineering of the core/shell heterostructure of QDs, their photoluminescence (PL) quantum yield (QY) and stability have been dramatically enhanced. Such high-quality QDs have been regarded as key fluorescent materials in realizing next-generation display devices. Particularly, electrically driven (or electroluminescent, EL) QD light-emitting diodes (QLED) have been highlighted as an alternative to organic light-emitting diodes (OLED), mostly owing to their unbeatably high color purity. Structural optimizations in QD material as well as QLED architecture have led to substantial improvements of device performance, especially during the past decade. In this review article, we discuss QDs with various semiconductor compositions and describe the mechanisms behind the operation of QDs and QLEDs and the primary strategies for improving their PL and EL performances.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.798-802
• /
• 2009

New blue emitting materials of o,p-TP-EPY and m,m-TP-EPY were synthesized using two terphenyl units with different structures in the new core of indenopyrazine. EL spectrum of o,p-TP-EPY was more blue shifted than m,m-TP-EPY, and external quantum efficiency of o,p-TP-EPY was showed improvement of about 60% compared to efficiency of m,m-TP-EPY.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.263-266
• /
• 1999

Electrolunlinescent devices based on conjugated polymer emitting materials have been much attracted possible applications for multicolor flat panel display, since the conjugated polymers have a small band gap emitting obtained at a low driving voltage. In this paper, we fabricated the single layer EL device using poly(3-hexylthiophene) as emitting material Electroluminescence(EL) and I-V-L characteristics of indium-tin-oxide[ITO]P3HT/AI device with a various thickness were investigated. It was demonstrate that the I-V characteristics depend, not the voltage but the electric- field strength, The current is dependent on the electric filed and not on the applied voltage, indicating that the carriers are injected by a tunneling process. In the device, the barrier to hole injection is only 0.5eV and the barrier to electron injection is 1.5eV.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.147-150
• /
• 1998

Since P-ELD(powders type electroluminescent device) phenomena were found by G.Destriau at first In 1936, lots of studying was performed in order to realize surface emission devices and flat panel display as a backlight. Due to the problem of low luminance and color and so on, it was delayed. Recently using electric field and thermal effect which can change it\`s molecular arrangement, it can be developed using photoelectric properties of P-ELD. P-ELD in this study was prepared by casting method. Basic structure is ITO/Phosphor/insulator/Al sheet, each layer was mixed by binder, which concentration 11p(poise) for phosphor, 8p(poise) fort insulator. Dielectric properties was investigated first and emission properties of P-ELD based on ZnS:Mn,Cu/ZnS:Cu,Br mixture. P-ELD prepared in this work exhibits about 100cd/㎡ 1-kHz simusoidal excitation.

• Proceedings of the KIEE Conference
• /
• 2002.06a
• /
• pp.110-113
• /
• 2002

Organic EL has been expected to adopt to a new styles of technology that make flat display after Tang & Vanslyke made good electric luminescence device in late 1980s. Their studies based on multi layer structure that consists of emitting layer and carrier transporting layer using proper organic material. In this study. we made multi layer device using $Eu(TTA)_3(phen)$ as a luminescence material by PVD and investigate luminous properties of each device. But oxidization of organic layer by ITO. energy walls in both pole interface. contaminations of ITO surface, importance of protecting membrane, diffusive dimming of light to cathode organic layer. these causes of degradations are common facts of a macromolecule and micromolecule. We think these degradation caused by the impact of heat and electro-chemical factor, bulk effect and interface phenomenon. and raise a question.

• Journal of the Korean Chemical Society
• /
• v.48 no.4
• /
• pp.371-378
• /
• 2004

The $SrGa_2S_4:Eu^{2+}$ green emitting phosphor has been studied as a luminous device for CRT (Cathode Ray Tube) or FED (Field Emission Display) and EL (Electroluminescence). This phosphor, also, is under noticed for LED (Lighting Emitting Diode) phosphor, which makes use of excitation characteristics of long wavelength region. The $SrGa_2S_4:Eu^{2+}$ phosphor was prepared generally conventional synthesis method using flux. However, this method needs high heat-treated temperature, long reaction time, complex process and harmful $H_2S$or $CS_2$ gas. In this works, therefore, we have synthesized $SrGa_2S_4:Eu^{2+}$ using SrS, $Ga_2S_3$, and EuS as starting materials, and the mixture gas of 5% H2/95% N2 was used to avoid the $H_2S$or $CS_2$. We investigated the luminescence characteristic of $SrGa_2S_4:Eu^{2+}$ phosphor prepared in various synthesis conditions, performed post-treatment and sieving process for application to LED.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.6
• /
• pp.17-23
• /
• 2000

In this study, we prepared red organic light-emitting-diode(OLED) with a fluorescent dye(Sq)-doped and inserted between emission and cathode layer 1,3-bis(5-p-t-butylphenyl)-1,3,4-oxadiazol-2-yl)benzene (OXD7) or/and tris(8-hydroxyquinoline) aluminum ($Alq_3$) layers for increasing electroluminescent(EL) efficiency. This inserting effect has been observed and EL mechanism characteristics have been examined. The hole transfer layer is a N,N'-diphenyl-N,N'-bis-(3-methyl phenyl)-1,1'-diphenyl-4,4'-diamine (TPD), and the host and guest materials of emission layer is $Alq_3$ and bis[1-methyl-3,3'-dimethyl-2-indorindiylmethyl] squaraine (Sq), respectively. For the inserting of $Alq_3$, emission efficiency increased. But we can not obtained highly pure red emission owing to the emission of inserting $Alq_3$ layer. The inserting of OXD7 makes hole block and accumulate. Because of increasing recombination probability of electron and hole, highly pure red color can be held. Simultaneously brightness characteristics and emission efficiency could improve.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2001.08a
• /
• pp.157-158
• /
• 2001

We synthesized Bis(3-N-ethylcarbazolyl) terephthalidene(BECP) and Bis(3-N-ethylcarbazolyl) cyanoterephthalidene (BECCP) and characterized EL properties of these materials. Our device shows a strong blue emission at 472 nm with a luminance efficiency of 0.9 lm/Wat a voltage, a current density. and a brightness of 8 V, 5.7 $mA/cm^2$, and 130 $cd/m^2$, respectively.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1093-1095
• /
• 2006

An orange-emitting phosphor for inorganic electroluminescent device has been studied. Cu and Cl were co-doped in Mn-doped ZnS for a high-performing phosphor. The effect of $Mn^{2+}-doping$ concentration as well as $Mg^{2+}-sensitizer$ addition on the luminescence characteristics has been investigated.