• Structural Engineering and Mechanics
• /
• v.21 no.6
• /
• pp.737-765
• /
• 2005

This paper presents a theoretical model for the behavior of partially confined axi-symmetric reinforced concrete members subjected to axial load. The analysis uses the theories of elasticity and plasticity to cover the full range of the concrete behavior. Analysis of the elastic range of the problem involves boundary conditions that are defined along a relatively simple geometry. However, extending the analysis into the plastic range involves difficulties that arise from the irregular geometry of the boundary between the plastic zone and the elastic zone, a boundary which is also changing as the axial load increases. The solution is derived by replacing the discrete steel ties with an equivalent tube of thickness $t_{eq}$ and by analyzing the concrete cylinder, which is uniformly confined by the equivalent tube. The equivalency criterion initiates from a theoretical analysis of the problem in its elastic range where further finite element analysis shows that this criterion is valid also for the plastic range of the cylinder material. According to the proposed model, the efficiency of the lateral reinforcement can be evaluated by the equivalent thickness $t_{eq}$. Comparison with published test results of confined reinforced concrete stress-strain curves shows good agreement between the test and the analytical results.

• Membrane and Water Treatment
• /
• v.3 no.4
• /
• pp.253-266
• /
• 2012

In this work, the effect of hybrid salts precipitation-nanofiltration (SP-NF) process on the scale deposits in thermal and membrane desalination processes has been studied. The analysis was carried out to study the scale formation from the Arabian Gulf seawater in MSF and RO reference processes by changing the percentage of pretreatment from 0 to 100%. Four different SP-NF configurations were suggested. A targeted Top Brine Temperature (TBT) of $130^{\circ}C$ may be achieved if 30% portion is pretreated by SP and/or NF processes. As a rule of thumb, each 1% pretreatment portion increases the reference TBT of $115^{\circ}C$ by $0.6^{\circ}C$. For both MSF and RO, parallel pretreatment of certain percentage of the feed by SP and the rest by NF, showed the lowest scale values. The case showed the best values for sulfate scale prevention and the highest values of increasing the monovalent ions relative to the divalent scale forming ions. Sulfate scale is significant in MSF process while carbonate scale is significant in RO. Salt precipitation was suggested because it is less costly than nanofiltration, but nanofiltration was used here because it is efficient in sulfate ions removal.

• Proceedings of the KIEE Conference
• /
• 2005.10c
• /
• pp.17-19
• /
• 2005

Variety of methods were discussed to reduce the cogging force in tubular permanent magnet type linear single phase AC generator. In paticular, the proposed methods depend on the variations of the permanent magnet construction. These methods Include two approaches in the form of sloped magnets, and conical magnets in addition to the conventional method of varying the magnet length. The undesired cogging force ripples were calculated by a two dimensional Finite Element Method(FEM). Moreover, the generated electromotive force in the stator coils was calculated fur each configuration of the permanent magnet. The experimental results agreed well with those obtained from the FEM-based simulations. Sufficient reduction in the cogging force was achieved over the range of 40% while the root mean square of the output voltage was maintained. It was found that the sloping the permanent magnet decreased the cogging force and at the same time increased the generated rms voltage of the AC generator. The performance of the designed linear AC generator was evaluated in terms of its efficiency, total weight, losses, and power to weight ratio.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.4
• /
• pp.797-808
• /
• 2021

This study examines the interaction between internal auditors' personality traits and the internal audit function effectiveness. It also investigates the effect of such interacted variables on financial reporting quality. This study employed a questionnaire survey to collect data from 193 internal auditors of Jordanian companies listed on the Amman Stock Exchange. The study model is validated and tested using the partial least squares structural equation modelling. The results reveal that all the examined personality traits of internal auditors significantly impact internal audit function effectiveness except for the extraversion trait. The results also show that personality traits have indirect effects on financial reporting quality via internal audit function effectiveness. These results suggest that internal auditors with high scores on openness to experience, emotional stability, and conscientiousness traits can be among the most significant contributors to the internal audit function effectiveness. The results also suggest that internal auditors' personality traits can be regarded as an internal audit function intangible resource that enhances effectiveness. The study's findings might be of interest to many different parties interested in enhancing internal audit function effectiveness and boosting the financial reporting quality, such as external and internal auditors, auditees, human resource departments, and Chief Internal Audit Executives.

• Nuclear Engineering and Technology
• /
• v.54 no.4
• /
• pp.1456-1463
• /
• 2022

The aim of this work is to study the radiation shielding properties of cement samples with waste glass incortated into its composition. The mass attenuation coefficient (MAC) of the samples were experimentally determined to evaluate their radiation shielding ability. The experimental coefficient was evaluated using NaI detector for gamma energies between 59.53 keV and 1408.01 keV using different radioactive point sources Am-241, Eu-152, Co-60, and Cs-137, and the gamma transmission parameters half-value layer, mean free path, and transmission factor were calculated. The theoretical coefficient of the composites was determined using Geant4 and XCOM software. The results were also compared against Geant4 and XCOM simulations by calculating the relative deviation between the values to determine the accuracy of the results. In addition the mechanical properties (including Compressive and porosity) as well as the thermogravimetric analysis were tested for the present samples. Overall, it was concluded that the cement sample with 50% waste glass has the greatest shielding potential for radiation shielding applications and is a useful way to reuse waste glass.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.10
• /
• pp.4761-4767
• /
• 2016

Objective: The use of Shamma (smokeless tobacco) by certain groups is giving rise to health problems, including cancer, in parts of Saudi Arabia. Our objective was to determine metals levels in Shamma using inductively coupled plasma mass spectrometry (ICP-MS). Methods: Thirty-three samples of Shamma (smokeless tobacco) were collected, comprising four types: brown Shamma (n = 14.0), red Shamma (n = 9.0), white Shamma (n = 4.0), and yellow Shamma (n = 6.0). All samples were collected randomly from Shamma users in the city of Najran. Levels of 11 elements (Al, As, Cd, Co, Cr, Cu, Li, Mn, Ni, Pb, and Zn) were determined by ICP-MS. Results: A mixed standard (20 ppb) of all elements was used for quality control, and average recoveries ranged from 74.7% to 112.2%. The highest average concentrations were found in the following order: Al ($598.8-812.2{\mu}g/g$), Mn ($51.0-80.6{\mu}g/g$), and Ni ($23.2-53.3{\mu}g/g$) in all four Shamma types. The lowest concentrations were for As ($0.7-1.0{\mu}g/g$) and Cd ($0.0-0.06{\mu}g/g$). Conclusions: The colour of each Shamma type reflects additives mixed into the tobacco. Cr and Cu were showed significant differences (P < 0.05) among Shamma types. Moreover, Pb levels are higher in red and yellow Shamma, which could be due to use (PbCrO4) as yellow colouring agent and lead tetroxide, Pb3O4 as a red colouring agent. The findings from this study can be used to raise public awareness about the safety and health effects of Shamma, which is clearly a source of oral exposure to metals.

• Electrical & Electronic Materials
• /
• v.15 no.12
• /
• pp.3-10
• /
• 2002

유기 전계발광 소자는 발광성 유기화합물을 양극과 음극사이에 형성한 후 전기적으로 여기시켜 그 발광을 이용하는 디스플레이로 1960년도에 처음 전기 적 발광현상이 안트라센 물질에서 처음 보고되었다[1]. 그 후 1987년에 코닥(Kodak)사의 Tang에 의해 적층형 유기 전계발광 소자가 처음 연구되어 소개된 후 실용화를 목표로 활발히 연구되기 시작하였으며[2], 1990년도 들어서는 유기물 재료 중에 전도성 고분자형 재료의 전기적 발광현상이 영국의 케임브리지 대학에서 보고되어 고분자형 유기 전계발광 소자연구가 진행되기 시작하였다[3]. 유기 전계발광 디스플레이는 평판 디스플레이의 한 종류로서 저전압 구동, 박형, 자체발광에 인한 고인식성 및 넓은 시야각, 빠른 응답속도 등의 많은 장점을 갖고 있어 현재 널리 사용되는 액정 디스플레이의 결점을 해결해줄 수 있는 차세대 디스플레이로 최근 들어 매우 높은 관심을 받고 있으며 연구개발 또한 가장n 활발한 분야로 알려져 있다 현재는 저분자형 유기물을 사용하는 저분자 유기 전계발광 소자와 전도성 고분자를 사용하는 고분자 유기 전계발광 소자가 전자발광 디스플레이 연구의 두 분야로 경쟁하면서 연구가 진행되고 있다. 이에 1990년도 후반부터 디스플레이로의 연구가 일본에서부터 활발히 진행되면서 수동형 (Passive Matrix) 구동의 유기 EID가 일본의 Pioneer,한국의 삼성 SDI등에 의해서 상업화되었다. 현재는 카오디오나 핸드폰 등에 이미 채용이 되고 있으며 일반인들이 쉽게 볼 수 있는 디스플레이로 바뀌어가고 있다. 또한 향후 중대형 디스플레이로 상업화하기 위하여 일본의 Sony, Sanyo, Toshiba, 한국의 삼성 SDI 등에서 능동구동 유기 EL (Active Matrix OLED (AM OLED))를 경쟁적으로 개발하고 있다. (그림 1 참조)유기 ELD는 이와 같이 빠른 속도로 발전하고 있으며, 향후 몇 년 내에 우리 주변의 일상적 인 디스플레이로 등장할 것으로 판단된다. 본 보고서에서는 현재 실용화가 급속히 진전되고 있는 유기 전계발광 디스플레이의 소자구조, 발광기구. 소자특성, 각종 재료, 풀컬러화 기술, 구동방법등에 대한 기술개요와 국내외 기술동향에 대하여 소개하고자 한다.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.6
• /
• pp.1164-1169
• /
• 2008

We developed multiplex RT-PCR assays that can detect and identify 12 hemagglutinin (H1-H12) and 9 neuraminidase (N1-N9) subtypes that are commonly isolated from avian, swine, and human influenza A viruses. RT-PCR products with unique sizes characteristic of each subtype were amplified by multiplex RT-PCRs, and sequence analysis of each amplicon was demonstrated to be specific for each subtype with 24 reference viruses. The specificity was demonstrated further with DNA or cDNA templates from 7 viruses, 5 bacteria, and 50 influenza A virus-negative specimens. Furthermore, the assays could detect and subtype up to $10^5$ dilution of each of the reference viruses that had an original infectivity titer of $10^6\;EID_{50}/ml$. Of 188 virus isolates, the multiplex RT-PCR results agreed completely with individual RT-PCR subtyping results and with results obtained from virus isolations. Furthermore, the multiplex RT-PCR methods efficiently detected mixed infections with at least two different subtypes of influenza viruses in one host. Therefore, these methods could facilitate rapid and accurate subtyping of influenza A viruses directly from field specimens.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.23
• /
• pp.10433-10438
• /
• 2015

Background: Acute lymphoblastic leukemia (ALL) is the most common cancer diagnosed in children and represents approximately 25% of cancer diagnoses among those younger than 15 years of age. Aim and Objectives: This study investigated substitutions in the ATP synthase subunit 6 gene of mitochondrial DNA (mtDNA) as a potential diagnostic biomarker for early detection and diagnosis of acute lymphoblastic leukemia. Based on mtDNA from 23 subjects diagnosed with acute lymphoblastic leukemia, approximately 465 bp of the ATP synthase subunit 6 gene were amplified and sequenced. Results: The sequencing revealed thirty-one mutations at 14 locations in ATP synthase subunit 6 of mtDNA in the ALL subjects. All were identified as single nucleotide polymorphisms (SNPs) with a homoplasmic pattern. The mutations were distributed between males and females. Novel haplotypes were identified in this investigation: haplotype (G) was recorded in 34% in diagnosed subjects; the second haplotype was (C) with frequency of 13% in ALL subjects. Neither of these were observed in control samples. Conclusions: These haplotypes were identified for the first time in acute lymphoblastic leukemia patients. Five mutations able to change amino acid synthesis for the ATP synthase subunit 6 were associated with acute lymphoblastic leukemia. This investigation could be used to provide an overview of incidence frequency of acute lyphoblastic leukemia (ALL) in Saudi patients based on molecular events.

• Journal of Korean Neurosurgical Society
• /
• v.48 no.1
• /
• pp.46-52
• /
• 2010

Objective : In cervico-thoracic junction (CTJ), the use of strong fixation device such as pedicle screw-rod system is often required. Purpose of this study is to analyze the anatomical features of C7 and T1 pedicles related to screw insertion and to evaluate the safety of pedicle screw insertion at these levels. Methods : Nineteen patients underwent posterior CTJ fixation with C7 and/or T1 included in fixation levels. Seventeen patients had tumorous conditions and two with post-laminectomy kyphosis. The anatomical features were analyzed for C7 and T1 pedicles in 19 patients using computerized tomography (CT). Pedicle screw and rod fixation system was used in 16 patients. Pedicle violation by screws was evaluated with postoperative CT scan. Results : The mean values of the width, height, stable depth, safety angle, transverse angle, and sagittal angle of C7 pedicles were $6.9{\pm}1.34\;mm$, $8.23{\pm}1.18\;mm$, $30.93{\pm}4.65\;mm$, $26.42{\pm}7.91$ degrees, $25.9{\pm}4.83$ degrees, and $10.6{\pm}3.39$ degrees. At T1 pedicles, anatomic parameters were similar to those of C7. The pedicle violation revealed that 64.1% showed grade I violation and 35.9% showed grade II violation, overall. As for C7 pedicle screw insertion, grade I was 61.5% and grade II 38.5%. At T1 level, grade I was 65.0% and grade II 35.0%. There was no significant difference in violation rate between the whole group, C7, and T1 group. Conclusion : C7 pedicles can withstand pedicle screw insertion. C7 pedicle and T1 pedicle are anatomically very similar. With the use of adequate fluoroscopic oblique view, pedicle screw can be safely inserted at C7 and T1 levels.