• 대한조선학회논문집
• /
• 제50권3호
• /
• pp.145-152
• /
• 2013

Recently, with oil price jumping and environmental issues, Green ship is paid deep attention to by ship owner, operator, builder, class and government. Fuel efficiency and reduction of $CO_2$ emissions are expected to have a strong influence on the design and operation of merchant ships. Many ship owners and operators are seeking the more economic method by the best operating route and the application of reliable and effective energy saving devices. With the Energy Efficiency Design Index (EEDI) in 2013 attention will more than ever be focused at achieving maximum fuel economy in the hydrodynamic design of hull forms, their appendages and propellers. IMO requirements for $CO_2$ emission for ships will now be implemented for vessels ordered from 1st January 2013. So far, a lot of new idea and patents have been proposed, tested, claimed and applied for various kinds of ship type. This paper shows numerical and experimental work related to a study on a energy saving devices particularly for fuller ship such as merchant vessel of Tanker and Bulker. From the bare hull wake measurements, typical upper/lower asymmetry of hull wake at the propeller disk was found. The pre-swirl duct have been designed and reviewed to recover the loss of propeller running in that condition. The general function of the pre-swirl duct was set to work against this asymmetry of wake and generate pre-swirled flow into the propeller against the propeller rotating direction.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권10호
• /
• pp.1054-1061
• /
• 2015

The International Maritime Organization (IMO) has been regulating emissions by making mandatory the compliance with institutions aimed at protecting air quality such as the Energy Efficiency Design Index (EEDI), Ship Energy Efficiency Management Plan (SEEMP) and Tier III. Under the circumstances, one of the response measures considered to be the most feasible is the replacement of existing marine fuel with Liquefied Natural Gas (LNG). The industry has been preemptively building infrastructure and developing and spreading engine technology to enable the use of LNG-fueled ships. The IMO, in turn, recently adopted the International Code of Safety for Ships Using Gases or Other Low-Flash-Point Fuels (IGF Code) as an institutional measure. Thus, it is required to comply with regulations on safety-related design and systems focused on response against potential risk for LNG-fueled ships, in which low-flash-point fuel is handled in the engine room. Especially, the Standards of Training, Certification and Watchkeeping (STCW) Convention was amended accordingly. It has adopted the qualification and training requirements for seafarers who are to provide service aboard ships subject to the IGF Code exemplified by LNG-fueled ships. The expansion in the use of LNG-fueled ships and relevant facilities in fact is expected to increase demand for talents. Thus, the time is ripe to develop methods to set up appropriate STCW training courses for seafarers who board ships subject to the IGF Code. In this study, the STCW Convention and existing STCW training courses applied to seafarers offering service aboard ships subject to the IGF Code are reviewed. The results were reflected to propose ways to design new STCW training courses needed for ships subject to the IGF Code and to identify and improve insufficiencies of the STCW Convention in relation to the IGF Code.

• 대한조선학회논문집
• /
• 제53권1호
• /
• pp.37-44
• /
• 2016

Recently researchers are conducting a lot of research related to EEDI in order to satisfy IMO resolution MEPC. Especially they are interested in design of energy saving device. This paper is to design the asymmetric pre-swirl stator for 160K LNG carrier in order to reduce energy. Two types of the asymmetric pre-swirl stator are taken into account; constant and variable pitch angle stators. “constant” and “variable” mean state that the pitch of stators change by radius. The dimensions of the stators are initially determined using potential-flow code. The propulsion performances of the stators are predicted using viscous-flow code. The model test is carried out in towing tank in PNU. Prediction of ship performance generally follow ITTC recommended. Ship wake prediction was done by two method, ITTC 1978 and ITTC 1999. Therefore propulsion performances were compared ITTC 1978 with ITTC 1999 methods. Comparison components are delivered power and thrust deduction coefficient of the model. Final pre-swirl stator is selected by comparing experiment and CFD.

• 대한조선학회논문집
• /
• 제53권5호
• /
• pp.400-409
• /
• 2016

In recent, shipping companies have made an enormous effort to improve the operation of vessel in various approaches, due to recession of shipping market and increasing competition among shipping companies. One of important parameters for improving the efficiency of vessel is the resistance performance that consist of friction and residual resistance. Especially, it is recognized that the friction resistance tends to be affected by conditions of vessel’s surface and occupies approximately 70~90% of the total resistance for slow speed ships. In general, the surface of vessel is covered with various type of paint to reduce fouling and corrosion. As time goes by, however, it is so hull roughness would be increased by fouling over the wetted surface that anti-fouling paints, such as CDP(Controlled Depletion Paint), Tin-Free SPC(Self Polishing Co-polymer) or Foul Release, are applied evenly on the hull surface. Nevertheless, these anti-fouling paints could not prevent fouling absolutely. A fundamental study on evaluating ship resistance performance variation due to hull roughness has been performed using a commercial software, Star-CCM+, which solves the continuity and Navier-Stokes equations for incompressible and viscous flow. The results of present simulation for plate are compared with some experimental data available and the effect of surface roughness to ship resistance performance is discussed.

• 대한조선학회논문집
• /
• 제54권4호
• /
• pp.352-359
• /
• 2017

Because the Energy Efficiency Design Index(EEDI) came into effect in 2013, it is necessary to develop a new technology to overcome $CO_2$ emission regulations. In structural design viewpoint, lots of researches are carried out to develop eco-friendly and high fuel efficiency ships by weight reduction. By using the automated compartment arrangement system and automated structural design algorithm which were developed by the authors, new researches are performing to combine the above two systems. However, the effect of weight reduction was not significant because structural designs by using these systems for the midship part was carried out only focused on the minimum still water bending moment. In this paper, at first, good compartment arrangements which give the minimum still water bending moment and(or) shear force were chosen by using the automated compartment system. And then, influence of shear force on weight reduction was investigated by using the automated structural design algorithm considering longitudinal strength, local strength and shear strength of longitudinal members in cargo holds. Conclusively, it is necessary to consider the minimum still water bending moment and shear force simultaneously to reduce the weight of mid-sized bulk carrier. Also, good compartment arrangement which gives much more weight reduction compared with existing ship was proposed.

• 한국해양공학회지
• /
• 제32권6호
• /
• pp.419-426
• /
• 2018

Recently, in an effort to reduce the energy efficiency design index (EEDI), studies on energy saving devices (ESDs) have been conducted. In this study, we designed a post-device suitable for a KRISO container ship (KCS) using computational fluid dynamics (CFD). In order to increase the efficiency of the post-device, a twisted rudder was used, which has a proven performance (showing a 1.34% reduction in DHP compared to the bare hull at 24 knots) in previous research at Pusan National University. In addition, an increase in efficiency was expected by the use of a rudder bulb, including the discontinuous section of the twisted rudder and a divergent propeller cap to prevent the contraction of the wake. The optimization criterion was the case where the delivery power was the least compared with the bare hull. We analyzed the cause of the efficiency increase through an analysis of the self-propulsion factor. The case study for optimization was divided into 4 types (1. clearance of the bulb and cap, 2. shape of the bulb, 3. size of the bulb and cap, and 4. asymmetric bulb). Finally, with a clearance of 50 mm from the ship, a spherical bulb with the cap having an angle of $5^{\circ}$, and an asymmetric rudder bulb with a bulb diameter of 1.2HH/1.4H (horizontal/vertical) showed a 2.05% reduction in DHP compared to the bare hull at 24 knots. We will fabricate a post-device that will be optimized in the future and verify the performance of the post-device through model tests.

• 해양환경안전학회지
• /
• 제27권2호
• /
• pp.369-376
• /
• 2021

전 세계적으로 환경오염 문제로 국제해사기구인 IMO(International Maritime Organization)에서는 이산화탄소 배출량과 관련된 지수인 EEDI(Energy Efficiency Design Index)를 만들어 새로 건조되는 선박들에 대한 규제를 적용하고 있다. 본 연구에서는 158k 원유운반선의 선형과 프로펠러 후류를 분석하여 새로운 형태의 에너지 저감 장치인 ring stator를 제안하였다. 최근의 선박들은 반류가 적은 즉 선미부 유속이 빠른 경향으로 발전되고 있어 덕트가 포함된 ESD(Energy Saving Device)는 저속비대선이라도 컨테이너선처럼 적용하기가 어렵다. 본 연구에서 제안한 ring stator는 이러한 점을 고려하여 새로이 개발된 장치로써 자항 성능 향상 뿐 아니라 저항 성능의 최소화를 목표로 설계를 진행하였다. Star-CCM+의 상용 프로그램을 활용하여 CFD 해석을 통해 설계한 ring stator의 성능을 확인하였고 최종 제시한 설계안에 대해 약 3.4 %의 추진 효율 개선 효과가 있음을 확인하였다. 설계된 ring stator에 대한 실험과의 비교 등을 통해 성능 검증 및 보다 정도 높은 최적화에 대한 연구를 추후 수행할 계획이다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.440-454
• /
• 2020

To prevent pollution from ships, the Energy Efficiency Design Index (EEDI) is a mandatory guideline for all new ships. The Ship Energy Efficiency Management Plan (SEEMP) has also been applied by MARPOL to all existing ships. SEEMP provides the Energy Efficiency Operational Indicator (EEOI) for monitoring the operational efficiency of a ship. By monitoring the EEOI, the shipowner or operator can establish strategic plans, such as routing, hull cleaning, decommissioning, new building, etc. The key parameter in calculating EEOI is Fuel Oil Consumption (FOC). It can be measured on board while a ship is operating. This means that only the shipowner or operator can calculate the EEOI of their own ships. If the EEOI can be calculated without the actual FOC, however, then the other stakeholders, such as the shipbuilding company and Class, or others who don't have the measured FOC, can check how efficiently their ships are operating compared to other ships. In this study, we propose a method to estimate the EEOI without requiring the actual FOC. The Automatic Identification System (AIS) data, ship static data, and environment data that can be publicly obtained are used to calculate the EEOI. Since the public data are of large capacity, big data technologies, specifically Hadoop and Spark, are used. We verify the proposed method using actual data, and the result shows that the proposed method can estimate EEOI from public data without actual FOC.

• 해양환경안전학회지
• /
• 제29권6호
• /
• pp.697-703
• /
• 2023

최근 대기오염으로 인한 환경오염을 줄이고자 국제 산업계의 노력의 일환으로 국제해사기구(IMO)의 규제 발효등으로 이어지고 있다. IMO는 EEXI,EEDI,CII 등 선박에서 나오는 대기오염을 줄이기 위해 각종 규제를 발효시키고 선박에서 소모되는 전력을 줄여 에너지를 절약하는 방안을 추진하고 있다. 선박에서 사용되는 전력의 대부분은 전동기가 차지한다. 선박에 설치된 전동기 중 큰 부하를 차지하는 기관실 송풍기는 수요와 관계없이 정속운전으로 운전하기 때문에 주파수제어를 통한 에너지절감을 기대할 수 있다. 본 연구에서는 발전기의 과급기에 연소공기를 공급하는 발전기 송풍기의 전동기 주파수를 제어하여 에너지 절감에 대한 실효성을 입증하였다. 송풍기 주파수 입력에 따른 과급기출구 온도의 출력 데이터를 기반으로 시스템을 모델링하고, 과급기 출구온도를 목표값으로 하여 주파수를 제어하는 PI 제어계를 형성하여 과급기 설계기준 출구온도를 유지하면서 송풍기의 주파수 제어를 통해 연간 15,552kW 전력소모량을 절감하였다. 송풍기 팬 주파수 제어를 통한 에너지절감액의 유효성은 하계(4월~9월) 및 동계(3월~10월) 기간동안 검증하였으며 이를 토대로 실습선의 연간 6,091천원의 유류비 절약과 이산화탄소 8.5Ton, SOx 2.4kg, NOx 7.8kg의 대기오염물질 저감을 달성하였다.