• 한국정밀공학회지
• /
• 제16권7호
• /
• pp.188-195
• /
• 1999

Cutting edge plays an important role in generating machined surface. In order to consider the geometric effects of the cutting edge on mechanical states, the concept of ploughing force and stagnation point was introduced which explains the generating mechanism of machined surface during cutting. The effects of edge radius and nose radius of cutting tool on the distribution of residual stresses of the machined surface having several hardness were studied. Good machined surface having high compressive residual surface stresses can be achieved if cutting tools having large edge radius and small nose radius are used for cutting work materials having high hardness with high depth of cut. The magnitude of edge radius and the hardness of work material also affected the shape of the chip in orthogonal cutting.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.652-657
• /
• 2002

It is addressed that the turbulent broadband sound power from a sirocco fan can be modeled by the trailing edge noise. The trailing edge noise is usually influenced by inflow turbulence, separation and boundary layer on the blade. The design parameters such as solidity(c/s) and stagger angle are specified to predict performance and noise level because the separation and slip velocity are strongly affected by them along with the flow coefficient. This paper reports the effects of the stagger angle upon the trailing edge noise for various trailing edge shapes. It is believed that the serrated trailing edge provides break-up mechanism for organized convecting vortices, thereby reduce the overall noise level.

• 한국가구학회지
• /
• 제17권2호
• /
• pp.25-34
• /
• 2006

This experiment was carried out to investigate the high-frequency gluing characteristics of poly vinyl acetate emulsion adhesive(PVAc) on MDF edge-glued boards. The edge-glued boards were glued lengthwise with butt, scarf, or finger joint. The wastes of MDF boards were reused as board materials. The obtained results are summarized as follows; the bending strength of edge-glued MDF increased slightly with the HF heating time, but the economically desirable heating time was 6 minutes. The bending and tensile strength of edge-glued MDF were high with scarf, finger and butt joint, in order. The strength of finger jointed MDF showed 80% of scarf jointed MDF. The effects of location of finger joints on the bending strength of edge-glued MDF were larger than those of the numbers of finger joints. The bending strength of edge-glued MDF with one joint on the middle position showed 40% decrease in comparison with non-jointed MDF.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1994년도 춘계학술대회
• /
• pp.23-26
• /
• 1994

A new algorithm using a measure for edge detection from ultrasonic image is proposed. Ultrasonic image is blurred by pre-processing for removing speckle noises and precise edge placement is not clear. Because extracted edge from blurred image is thick, a measure utilizing the absolute difference of mean between two windows is used to thin the thickness of extracted edge in blurred image. The algorithm is effective to process blurred image due to the noise filtering that remove speckle noises. Results of the proposed algorithm using a measure show good edge detection performance comparing with other gradient edge operators.

• International Journal of Aeronautical and Space Sciences
• /
• 제7권2호
• /
• pp.128-136
• /
• 2006

The present study examined the effects of micro leading-edge flaps on the vortex characteristic changes of a double-delta wing through pressure measurements of the wing upper surface and PIV measurements of the wing-leeward flow region. The experimental data were collected and analyzed while changing the deflection angle of the leading-edge flaps to investigate the feasibility of using micro leading-edge flaps as flow control devices. The test results revealed that the leading edge modification could greatly alter the vortex flow pattern and the wing surface pressure of the delta wing, which suggested that the leading-edge flaps could be used as an effective device for the control of delta-wing vortex flow.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2389-2392
• /
• 2005

We present fast stereo matching algorithm using edge projection. Traditional stereo matching algorithm uses 2D template for the search of corresponding point thus it requires huge the computational cost. In this paper, we reduce the 2D search problem into 1D using edge projection along vertical and horizontal direction inside the region of interest. Also, by accumulation of edge projection along vertical and horizontal direction, the edge projection within the region of interest could simply be obtained by just subtracting two values. Experimental results show that matching algorithm using edge projection also gives comparable discriminating power compared to that of using intensity.

• 전자공학회논문지S
• /
• 제34S권11호
• /
• pp.138-147
• /
• 1997

The ultrasonic images are corrupted by the granular pattern noise - a speckle noise. The speckle exist in the type of coherent imaging systems, and the speckle is the signal independent and multiplicative noise. In this paepr, we derive two filters using the gradient and symmetry. One is a noise suppression filter which removes noise while preserves the edges. It is named the ASRF-GS (Adaptive Speckle Removal Filer - Gradient and Symmetry). And the other is a edge detection filter which obtains the thin edge map, called the EDUGS(Edge Detection Using Gradient and Symmetry). The performance of the proposed noise suppression filter is evaluated by the IMPV(SNR improvement) and the Speckle Index(SI), and the perforamnce of the edge detection is evaluated by the edge detection error rate. According to the evaluated method, The SI reduced about 0.035, The IMPV improved about 1.265(dB), and the edge detection error rate is about 17.5%.

• 한국유체기계학회 논문집
• /
• 제6권3호
• /
• pp.7-14
• /
• 2003

It is addressed that the turbulent broadband sound power from a sirocco fan can be modeled by the trailing edge noise. The trailing edge noise is usually influenced by inflow turbulence, separation, and boundary layer thickness on the blade. The design parameters such as solidity (c/s) and stagger angle are specified to predict performance and noise level because the separation and slip velocity are strongly affected by them along with the flow coefficient. This paper reports the effects of the stagger angle upon the trailing edge noise for various trailing edge shapes. It is believed that the serrated trailing edge provides break-up mechanism for organized convecting vortices, thereby reduce the overall noise level for every case of stagger angle.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 신호처리소사이어티 추계학술대회 논문집
• /
• pp.425-428
• /
• 2003

Recently, the IDS(Intrusion Detection System) using a video camera is an important part of the home security systems which start gaining popularity. However, the video intruder detection has not been widely used in the home surveillance systems due to its unreliable performance in the environment with abrupt illumination change. In this paper, we propose an effective moving edge extraction algorithm from a sequence image. The proposed algorithm extracts edge segments from current image and eliminates the background edge segments by matching them with reference edge list, which is updated at every frame, to find the moving edge segments. The test results show that it can detect the contour of moving object in the noisy environment with abrupt illumination change.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.1025-1028
• /
• 1999

After detecting the edge which is applying the morphological operators to the hybrid FCNN, we could analyze and compare. The hybrid FCNN is completely removed to the noise in the image, and worked in order to obtain the result image which is closest to the original image. Also, the morphological operator is applied to the image as the method in order to detect more good the edge than the conventional edge. FCNN which is the pipeline type is completely suitable to detecting the image processing as well as the hardware size. In this paper. we would make the structure elements of the morphological operator the variable template and the static template, and compare with the edge enhancement of two images. After being the result which is applying the variable template morphological operator and the static template morphological operator to the image, we could know that the edge images applying the variable template is superior in a edge enhancement side.