• Title/Summary/Keyword: EDFA

Search Result 107, Processing Time 0.023 seconds

Dispersion Map Optimization and Dispersion Slope Mismatch Issue on 40 Channel x 10 Gbit/s Transmission Over 3000 km Using Standard SMF and all EDFA Amplification (표준 단일모드 광섬유와 EDFA를 이용한 10 Gb/s 40 파장다중 채널 신호의 3000 km 전송에서 분산 보상 맵 최적화와 분산 기울기 불일치 영향)

  • Kim Min-Sung;Choi Bo-Hun
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.30 no.1A
    • /
    • pp.1-9
    • /
    • 2005
  • We have studied the dispersion properties of a 40 channel x 10 Gbit/s wavelength division multiplexer(WDM) transmission link using standard single mode fiber with all EDFA amplification over 30 x 100 km spans. The dispersion map of the link was investigated by adding fiber sections with positive or negative dispersion at the transmitter, within each amplifier span, and at the receiver. Optimum combinations of these dispersive fiber lengths were attained to significantly enhance the overall transmission performance.

Characteristics of Transient Response According to Lasing Wavelengths and Propagation Directions in Double-Pass Gain-Clamped L-band EDFA with Linear Cavity (선형공진 이중경로증폭 고정이득 L-band EDFA에서 발진 파장 및 방향에 따른 과도응답 특성)

  • Kim, Ik-Sang
    • The Journal of Engineering Research
    • /
    • v.7 no.1
    • /
    • pp.5-16
    • /
    • 2005
  • We implemented DPGC(Double-Pass Gain-Clamped) L-band EDFA for highly efficient amplification. A lasing signal generated within the linear cavity, can minimize the fluctuation of surviving channels when several WDM(Wavelength Division Multiplexing) channels are added or dropped. The new method describing the characteristics of transient response of surviving channels quantitatively is suggested. It is to measure the ratio of lasing output before add or drop to that after add or drop. We investigated dynamic characteristics by using this method according to lasing wavelengths and propagation directions within the cavity. The experimental measurements show that the short lasing wavelength and backward propagation direction is the best condition for small fluctuation of surviving channels.

  • PDF

Improvement of extinction ratio of amplified pulses by incorporating a nonlinear optical loop mirror (EDFA로 증폭된 고출력 펄스 신호의 소광비 향상)

  • Kim, Byung-Jun;Choi, Hyun-Beom;Lee, Han-Hyub;Lee, Dong-Han;Kim, Dae-Yun;Kwon, Il-Bum
    • Korean Journal of Optics and Photonics
    • /
    • v.14 no.2
    • /
    • pp.189-193
    • /
    • 2003
  • A two-stage erbium-doped fiber amplifier (EDFA) with a band pass filter is used to get optical pulses of high peak value. The pulse signal has a 32 ㏈ extinction ratio, 125 W peak power and 79 ㎽ pulse off power. A nonlinear optical loop mirror (NOLM) is used to lower the pulse off power so as to increase the extinction ratio. The pulse signal after the NOLM has a 50.4 ㏈ extinction ratio, 35 W peak power and 0.3 ㎽ pulse off power.

Impact of the Gain-saturation Characteristic of Erbium-doped Fiber Amplifiers on Suppression of Atmospheric-turbulence-induced Optical Scintillation in a Terrestrial Free-space Optical Communication System

  • Jeong, Yoo Seok;Kim, Chul Han
    • Current Optics and Photonics
    • /
    • v.5 no.2
    • /
    • pp.141-146
    • /
    • 2021
  • We have evaluated the suppression effect of atmospheric-turbulence-induced optical scintillation in terrestrial free-space optical (FSO) communication systems using a gain-saturated erbium-doped fiber amplifier (EDFA). The variation of EDFA output signal power has been measured with different amounts of gain saturation and modulation indices of the optical input signal. From the measured results, we have found that the peak-to-peak power variation was decreased drastically below 2 kHz of modulation frequency, in both 3-dB and 6-dB gain compression cases. Then, the power spectral density (PSD) of optical scintillation has been calculated with Butterworth-type transfer function. In the calculation, different levels of atmospheric-turbulence-induced optical scintillation have been taken into account with different values of the Butterworth cut-off frequency. Finally, the suppression effect of optical scintillation has been estimated with the measured frequency response of the EDFA and the calculated PSD of the optical scintillation. From our estimated results, the atmospheric-turbulence-induced optical scintillation could be suppressed efficiently, as long as the EDFA were operated in a deeply gain-saturated region.

Fabrication of Gain-flattened Erbium-doped Fiber Amplifier using Microbanding Long-period Fiber Gratings (MLPFG를 이용한 이득평탄화된 어븀첨가 광섬유증폭기 구현)

  • Hwang, Woong;Sohn, Kyung-Rak
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • v.2
    • /
    • pp.65-67
    • /
    • 2006
  • 광통신이 발달하면서 보다 빠른 정보전송을 할 수 있지만 다른 전송매체와 마찬가지로 장거리 전송 시 손실이 발생하고 이러한 문제의 해결책으로 광 증폭기의 필요성이 대두 되었다. 기존의 광신호 증폭기에서는 광 신호를 전기신호 변환한 후 증폭하고 다시 증폭된 전기신호를 광신호로 변환하는 과정과 복잡한 구조는 전송시스템의 병목 문제를 유발하였다. 이러한 문제점을 해결할 수 있는 순수 광신호 증폭시스템인 어븀첨가광섬유증폭기 (EDFA)를 제작하고 EDFA의 이득평탄화를 위하여 이득평탄화 필터로 MLPFG를 제작하여 적용하였다. 제작된 EDFA는 20dB 이상의 신호 증폭을 보였다.

  • PDF

Characterization of Erbium-Doped Fiber Amplifier (에르븀 첨가 광섬유증폭기의 특성측정)

  • 한정희;이재승;주무정;심창섭
    • Journal of the Korean Institute of Telematics and Electronics A
    • /
    • v.30A no.5
    • /
    • pp.45-51
    • /
    • 1993
  • An erbium doped fiber amplifier(EDFA) pumped by aingle 1.48$\mu$m LD was fabricated, and its gain and noise characteristics were measured. As a signal source, 1548 nm wavelength DFB LD was used. The small signal net gain of the EDFA module was 21.8 dB with maximum gain coefficient 0.7dB/mW for the erbium fiber length of 17.6 m, the pump power of 58 mW, and an input signal power of -25 dBm, respectively. The saturation power of the EDFA was 1 dBm for the input signal power of -5 dBm and the noise figure, measured by using an optical spectrum analyzer, was 5.8 dB for the input signal power of -40 dBm.

  • PDF

A Novel Technique to Minimize Gain-Transient Time of WDM signals in EDFA

  • Shin, Seo-Yong;Kim, Dae-Hoon;Kim, Sung-Chul;Lee, Sang-Hun;Song, Sung-Ho
    • Journal of the Optical Society of Korea
    • /
    • v.10 no.4
    • /
    • pp.174-177
    • /
    • 2006
  • We propose a new technique to minimize gain-transient time of wavelength-division-multiplexing (WDM) signals in erbium-doped fiber amplifiers (EDFA) in channel add/drop networks. We have dramatically reduced the gain-transient time to less than $3{\mu}sec$ by applying, for the first time to our knowledge, a disturbance observer with a proportional/integral/differential (PID) controller to the control of EDFA gain. The $3{\mu}sec$ gain-transient time is the fastest one ever reported and it is approximately less than 1.5% of $200{\mu}sec$ gain-transient time of commercially available EDFAs for WDM networks. We have demonstrated the superiority of the new technique by performing the simulation with a numerical modeling software package such as the $Optsim^{TM}$.

Experimental Evaluation of Frequency Characteristics of Gain-saturated EDFA for Suppression of Signal Fluctuation in Terrestrial Free-space Optical Communication Systems

  • Yoo Seok, Jeong;Chul Han, Kim
    • Current Optics and Photonics
    • /
    • v.7 no.1
    • /
    • pp.28-32
    • /
    • 2023
  • Frequency characteristics of gain-saturated erbium-doped fiber amplifier (EDFA) are experimentally evaluated to mitigate the optical signal fluctuation induced by atmospheric turbulence in terrestrial freespace optical communication systems. Here, an acousto-optic modulator (AOM) is used to emulate optical signal fluctuations induced by atmospheric turbulence. The waveform which is generated in proportion to the refractive-index structural parameters is used to drive the AOM at various periodic frequencies. Thus, the dependence of the signal fluctuation suppression on the frequency is evaluated. The experiment is conducted using a periodic frequency sweep of the AOM driving voltage waveform and signal input power variation of the amplifier. It is observed that a low periodic frequency and high input signal power effectively suppress the optical signal fluctuation. This study evaluates the experimental results from the high-pass filter and gain-saturation characteristics of the EDFA.

Regenerative Erbium-Doped Fiber Ring Amplifier with Unidirectional and Bi-directional Feedbacks

  • Shah, N.S.Mohd.;Teyo, T.C.;Poopalan, P.;Ahmad, H.
    • Proceedings of the IEEK Conference
    • /
    • 2002.07a
    • /
    • pp.540-541
    • /
    • 2002
  • In this paper, the performance of upidirectional and hi-directional regenerative erbium-doped fiber amplifier (EDFA) is compared. The systems are operating above laser oscillation threshold. The experimental results show that the unidirectional regenerative EDFA has a better performance than the hi-directional.

  • PDF

Simple and Efficient Management Scheme for EDFA in WDM Systems

  • Ali, Mumtaz;Khaliq, M. Shoaib;Sattar, A.;Shin, Seo-Yong
    • Journal of the Optical Society of Korea
    • /
    • v.11 no.4
    • /
    • pp.149-152
    • /
    • 2007
  • We present a simple and efficient management scheme for gain control of EDFA by using standardized network management protocol(Simple Network Management Protocol) and operating the optical amplifier in a link-control scheme. We have demonstrated the proposed scheme by using SNMP Simulator and optical simulation software package.