• Archives of Pharmacal Research
• /
• 제17권4호
• /
• pp.263-268
• /
• 1994

This study was conducted to characterize the in vivo pharmacology of KR-30988, KR-30992 and losartan, new AT antagonists, given as i.v. cumulative doses, in two antimal models of high renin, conscious renal artery-ligated hypertensinve rats (RHRs) and nomotensive rats anesthetized with urethane (90 mg/kg, i.p.) and .alpha.-chloralose (90 mg/kg, i.p.), with a special emphasis on the phamacological characterization of the latter model. In conscious RHRs, KR-30988, KR-30992, losartan and captopril caused a dose-dependent decrease in blood pressure, their relative potencise ($ED_{20}$) being 0.057, 0.028, 0164 and 0.018 mg/kg, i.v., repectively. In anesthetized rats, 2 hours after anesthesia, plasma renin activity was increased from 7.31 tp 34.07 ng/ml/h, the level approximately 1.5 times greater than the highest level in RHRs. In anesthtized rats, the $ED_{20}$s for all four compounds were 0.004 mg/kg i.v., respectively. By comparison, $ED_{20}$sfrom anesthetized rats were 4 to 5 times smaller than those from conscious RHRs, with a good correlation (.gamma. = 0.999) noted between thetized rats to the hypotensive activity of the compounds and the same order of potencies intwo models. These results suggest that, in addition to PHRs, the normotensive rats anesthetized as above can serve as a suitable model for the rapid phamacological evaluation of $AT_1$ receptor antagonists.

• 동서간호학연구지
• /
• 제20권1호
• /
• pp.29-36
• /
• 2014

Purpose: The purpose of this study is to identify relationships among work environment, job satisfaction and turnover intention of emergency department (ED) nurses. Methods: The survey was given to 220 ED nurses which are located in G metropolitan from May 1st to July 31st of 2012. The results were analyzed by descriptive statistics, t-test, ANOVA, pearson correlation coefficients and stepwise multiple regression using SPSS WIN 19.0 program. Results: The turnover intension according to the general characteristics of the subjects has significant difference between emergency room experience, current duty satisfaction, and turnover plan in 1 year. In the correlation between work environment, job satisfaction and turnover intention of the subjects, work environment and job satisfaction have positive correlation, job satisfaction and turnover intention either job satisfaction and turnover intention have a negative correlation. Factors influencing turnover intention are job satisfaction, career and current duty satisfaction, also the full explanatory power of the model was 24.4%. Conclusion: The results indicate factors that influence turnover intention are job satisfaction, career, and current job satisfaction. We hope these result help to provide effective intervention strategies for reducing ED nurses' turnover.

• Journal of Pharmaceutical Investigation
• /
• 제25권1호
• /
• pp.9-17
• /
• 1995

To stabilize omeprazole(OMP), ethylenediamine(ED) complex of omeprazole(OMPED) was prepared by reaction between OMP and ED in methanol, and the complex formation was confirmed by the instrumental analysis, i.e., IR, DSC, EA, NMR, MS and XRD. The rates of decomposition of OMP and OMPED in aqueous solution and the shelf lives at standard temperature were measured by accelerated stability analysis. The results are summarized as follows; The mole ratio of OMP and ED in OMPED complex is 1:1, the energy of formation within OMPED might be combined between polar imidazole group of OMP with induced a dipole amine group in the readily polarizable ED molecule. At standard temperature the degradation rate constant of OMP in aqueous solution is $2.540{\times}10^{-2}\;hr^{-1}$ and the shelf life is 4.15 hrs, and in the case of OMPED the degradation rate constant is $7.986{\times}10^{-4}\;hr^{-1}$ and the shelf life is 131.96 hrs. So, the OMPED has about 31 times longer shelf life than OMP. The activation energy of OMP and OMPED are 5.23 and 18.55 kcal $mole^{-1}$ respectively. The stability of OMP is dependent chiefly on pH in the solutions and it decomposes readily in acidic medium by hydrogen ion catalized reaction but becomes stable beyond pH 9.0. In case of the ED-complex, OMPED is stable in neutral as well as in dilute acidic solutions even in pH 6, OMPED is very stable to light(UV), that is, the rate constant and shelf life of OMP are $k=1.0188{\times}10^{-2}\;day^{-1}$, $T_{90%}=4.5 \;days$, on the other hand, the those of OMPED are $k=7.138{\times}10^{-4}\;day^{-1}$, $T_{90%}=64.1\;days$, respectively. From the above results, it is thought that new dosage forms could be developed by using the OMPED as a potential OMP complex.

• Journal of Trauma and Injury
• /
• 제23권2호
• /
• pp.113-118
• /
• 2010

Purpose: Prolonged stay in the emergency department (ED), which is closely related with the time interval from the ED visit to a decision to admit, might be associated with poor outcomes for trauma patients and with overcrowding of the ED. Therefore, we examined the factors affecting the delay in the decision to admit severe trauma patients. Also, a multidisciplinary department system was preliminarily evaluated to see if it could reduce the time from triage to the admission decision. Methods: A retrospective observational study was conducted at a tertiary care university hospital without a specialized trauma team or specialized trauma surgeons from January 2009 to March 2010. Severe trauma patients with an International Classification of Disease Based Injury Severity Score (ICISS) below 0.9 were included. A multivariable logistic regression analysis was used to find independent variables associated with a delay in the decision for admission which was defined as the time interval between ED arrival and admission decision exceeded 4 hours. We also simulated the time from triage to the decision for admission by a multidisciplinary department system. Results: A total of 89 patients were enrolled. The average time from triage to the admission decision was $5.2{\pm}7.1$ hours and the average length of the ED stay was $9.0{\pm}11.5$ hours. The rate of decision delay for admission was 31.5%. A multivariable regression analysis revealed that multiple trauma (odds ratio [OR]: 30.6, 95%; confidence interval [CI]: 3.18-294.71), emergency operation (OR: 0.55, 95%; CI: 0.01-0.96), and treatment in the Department of Neurosurgery (OR: 0.07, 95%; CI: 0.01-0.78) were significantly associated with the decision delay. In a simulation based on a multidisciplinary department system, the virtual time from triage to admission decision was $2.1{\pm}1.5$ hours. Conclusion: In the ED, patients with severe trauma, multiple trauma was a significant factor causing a delay in the admission decision. On the other hand, emergency operation and treatment in Department of Neurosurgery were negatively associated with the delay. The simulated time from triage to the decision for admission by a multidisciplinary department system was 3 hours shorter than the real one.

• 시스템엔지니어링학술지
• /
• 제7권2호
• /
• pp.1-5
• /
• 2011

The purpose of the Environment Design (ED) for Main Control Room (MCR) of Nuclear Power Plant (NPP) is to provide and create an optimal working space to be free from physical, physiological and mental stress as well as environmental discomfort, based on the previous environment design experiences and to recommend the best ED including the color, the lighting and the interior design. Environment Design consists of three main areas: Human factor engineering design, Interior design with color design, and Lighting design. These design areas have been interactively cooperated in a way that each design specialist would share the objectives and concepts of the Environment Design for MCR. The specialists for Human Factors Engineering design had a corporative role in such a way to provide the guidelines for MCR design suitability of Interior and Lighting design considering the Human System Interface (HSI) safety concerns. This paper describes fruitful efforts to create the best fit for MCR ED among several design proposals with the design recommendations, impacts, and contributions to NPP environment.

• 미생물학회지
• /
• 제53권3호
• /
• pp.193-199
• /
• 2017

This study was aimed to evaluate the antimicrobial activity of Penicillium purpurogenum ED76 on several clinically important microorganisms. The endophytic fungus P. purpurogenum ED76 was previously isolated from Swietenia macrophylla leaf. The antimicrobial efficacy of P. purpurogenum ED76 dichloromethane extract was determined via disc diffusion and broth microdilution assay. A kill curve study was conducted and the morphology of extract treated bacterial cells were viewed under scanning electron microscope. The dichloromethane extract showed significant inhibitory activity on 4 test bacteria and 2 test yeasts. The minimal inhibitory concentration of the extract ranged from 125 to $1,000{\mu}g/ml$, which indicates the different susceptibility levels of the test microorganisms to the fungal extract. The kill curve study has revealed a concentration-dependent inhibition for all test microorganisms. With the increase of the extract concentration, the microbial growth was significantly reduced. The scanning electron micrograph of dichloromethane extract-treated Staphylococcus aureus cells showed the total damage of the cells. The cell wall invagination of the bacterial cells also indicates the loss of cellular materials and metabolic activity. The gas chromatography mass spectrometry analysis of the extract also showed that the major compound was stigmasterol, which constitutes 45.30% of the total area. The dichloromethane extract of P. purpurogenum ED76 exhibited significant inhibitory activity on several clinically important bacteria and yeasts. The study proposed a possible mode of action that the extract cause significant damage to the morphology of S. aureus cells.

• 보건행정학회지
• /
• 제16권4호
• /
• pp.128-146
• /
• 2006

The objective of this paper is to examine the proportion and characteristics of non-emergent patients at emergency departments. The observational survey was conducted using a structured form used by emergency medicine specialists or senior residents on June 7-20, 2005. 1,526 patients at ten emergency centers took part in this study. The structural form contained type of insurance, route and means of emergency department (ED) visit, triage based on the Manchester Triage Scale(MTS)-modified criteria, emergency level based on the government defined rule, type of emergency centers (Regional Emergency Medical Center; REMC, Local Emergency Medical Center; LEMC, Local Emergency Agency; LEA), as well as patient's general information. Data were analyzed using SAS statistical program(V.8.2). Descriptive analysis was performed to describe the magnitude of non-emergent patients. ${\chi}^2-analysis$ and logistic regression analysis was performed to identify the nonurgent patients' characteristics. In the MTS-modified criteria, we found a 15.3% rate of non-emergent patients. This rate differed from that of non-emergent patients obtained using government's rule. In particular, there were inaccuracies in the definition of government rule on non-emergent patients, so it is necessary to apply the new government rule regarding classification of non-emergent patients. There were significant differences in the rate of non-emergent patients according to type of ED, means of ED visit, time to visit, and insurance. Non-emergent patients are more likely to visit a D-type ED(LEA having less than 20,000 patients annually), not to use ambulance, to have 'Automobile Insurance, Industrial Accident Compensation Insurance, or pay out-of-pocket'. Non-emergent patients tend to visit ED due to illness rather than injury. Further studies on the development' of triage scale and reexamination of the government's rule on emergency visits are required for future policy in this area.

• 분석과학
• /
• 제29권6호
• /
• pp.300-304
• /
• 2016

폐지방산과 ethylenediamine 또는 N,N'-bis (2-hydroxyethyl)ethylenediamine으로부터 아스팔트 박리방지제를 합성하였다. FT-IR과 NMR을 이용하여 분석한 결과 아마이드결합의 생성 및 박리방지제의 합성이 성공적으로 수행되었음이 확인하였다. 합성된 여러 종류의 박리방지제의 접착특성은 접촉각과 BBS 시험을 통해 비교하였다. 접촉각 측정으로부터 에틸렌다이아민과 동물유지로부터 제조된 시료가 가장 소수성이 컸으며, BBS 시험으로부터 수분저항성도 94%로 가장 우수한 것으로 나타났다. 그러나 에틸렌다이아민과 폐식용유의 반응생성물이 수분처리 전과 후의 절대적인 접착력은 각각 약 3610 및 3227 kPa로 가장 우수하였다. 전반적으로 접착력은 ED의 반응생성물이 HEED의 반응생성물보다 우수하였으며, 폐식용유나 동물유지의 반응생성물들이 순수한 콩기름의 반응생성물들보다 우수하였다.

• 약학회지
• /
• 제40권1호
• /
• pp.90-94
• /
• 1996

6-[(N-4-Fluorophenyl)amino]-7-chloro-5,8-quinolinedione(RCK3) was tested for antifungal activities, in vivo, against Candida albicans. RCK3 was compared with ketoc onazole and fluconazole in the treatment of systemic infection with Candida albicans in normal mice. The therapeutic potential of RCK3 had been assessed by evaluating their activities (survival rate) against systemic infections in normal mice. RCK3 had $ED_{50},\;8.78{\pm}0.18mg/kg$ but ketoconazole and fluconazole had $ED_{50},\;8.00{\pm}0.73,\;10.00{\pm}0.43mg/kg$ respectively. Intraperitoneally administered RCK3 at the $ED_{50}$, 8.78mg/kg for 7 days and 14 days reduced Candida albicans colony count in the kidneys and livers as well as ketoconazole and fluconazole at these $ED_{50}$, 8.00 and 10.00mg/kg. And administered RCK3 at the $ED_{50}$ for 14 days improved survival rates better than ketoconazole.

• International Journal of CAD/CAM
• /
• 제7권1호
• /
• pp.71-80
• /
• 2007

Recently, feature-based solid modeling systems have been widely used in product design. However, for engineering analysis of a product model, an ed CAD model composed of mid-surfaces is desirable for conditions in which the ed model does not affect analysis result seriously. To meet this requirement, a variety of solid ion methods such as MAT (medial axis transformation) have been proposed to provide an ed CAE model from a solid design model. The algorithm of the MAT approach can be applied to any complicated solid model. However, additional work to trim and extend some parts of the result is required to obtain a practically useful CAE model because the inscribed sphere used in the MAT method generates insufficient surfaces with branches. On the other hand, the mid-surface ion approach supports a practical method for generating a two-dimensional ed model, even though it has difficulties in creating a mid-surface from some complicated parts. In this paper, we propose a dimension reduction approach on solid models based on the midsurface abstraction approach. This approach simplifies the solid model by abbreviating or removing trivial features first such as the fillet, mounting, or protrusion. The geometry of each face is replaced with mid-patches from the simplified model, and then unnecessary topological entities are deleted to generate a clean ed model. Also, additional work, such as extending and stitching mid-patches, completes the generation of a mid-surface model from the patches.