• Journal of the Microelectronics and Packaging Society
• /
• v.7 no.3
• /
• pp.13-17
• /
• 2000

The electrical properties of polyimide for interlayer dielectric applications are investigated with ECR (Electron Cyclotron Resonance) etching process. ECR etching with $Cl_2$-based plasma, generally used for aluminum etching, results in an increase in the dielectric constant of polyimide, while $SF_{6}$ plasma exhibits a high polyimide etch rate and a reducing effect of the dielectric constant. The leakage current of the polyimide is significantly suppressed after plasma exposure. Combination of Al etching with $Cl_2$plasma and polyimide etching with $SF_{6}$ plasma is expected as a good tool for realizing the multilevel metallization structures.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.12
• /
• pp.68-74
• /
• 1998

Improved performance and suppressed short-channel effects of polysilicon thin film transistors (poly-Si TFTs) with very thin electron cyclotron resonance (ECR) $N_2$O-plasma gate oxide have been investigated. Poly-Si TFTs with ECR $N_2$O-plasma oxide ($N_2$O-TFTs) show better performance as well as suppressed short-channel effects than those with conventional thermal oxide. The fabricated $N_2$O-TFTs do not show threshold voltage reduction until the gate length is reduced to 3 ${\mu}{\textrm}{m}$ for n-channel and 1 ${\mu}{\textrm}{m}$ for p-channel, respectively. The improvements are due to the smooth interface, passivation effects, and strong Si ≡ N bonds.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.5
• /
• pp.365-370
• /
• 1998

We studied a electrical properties in GaAs/AlGaAs/InGaAs pseudomorphic high electron mobility transistors(PHEMT s) recessed by electron cyclotron resonance(ECR) plasma and wet etching. Using the $NH_4OH$ solution, a nonvolatile AlF$_3$layer formed on AlGaAs surface after selective gate recess is effectively eliminated. Also, we controlled threshold voltage($V_th$) using $H_3PO_4$ etchant. We have fabricated a device with 540 mS/mm maximum transconductance and -0.2 V threshold voltage by using $NH_4OH$ and $H_3PO_4$dip after ECR gate recessing. In a 2-finger GaAs PHEMT with a gate length of 0.2$\mu m$ and width of 100 $\mu m$, a current gain of 15 dB at 10 GHz and a maximum cutoff frequency of 58.9 GHz have been obtained from the measurement of current gain as a function of frequency at 12mA $I_{dss}$ and 2 V souce-drain voltage.

• Korean Journal of Materials Research
• /
• v.15 no.7
• /
• pp.465-472
• /
• 2005

Preparation of copper film on PET substrate was carried out by cyclic operation of RF-magnetron­sputtering under continuous operation of ECR-CVD. The purpose of this study is aimed to an increase in deposition rate with keeping excellent adhesion between copper film and PET. In order to optimize the sputtering time under continuous ECR-CVD, cyclic operation concept is employed. By changing parameters of cyclic operation such as split of e and cycle time of A, the characteristics and thickness of the deposited copper film are controlled. As $\theta$ value increase, film thickness could confirm to increase and its surface resistivity value decreases. The highest adhesive strength appears at $\theta=0.33$ and cycle time of 30 min. The uniformity of copper film shows $5\%$ in our experimental range.

• Journal of the Korean Vacuum Society
• /
• v.2 no.4
• /
• pp.462-467
• /
• 1993

ECR PECVD(Electron Cyclotron Resonance Plasma Enhanced Chemical Vapor Deposition )장치를 이용하여 (100) 실리콘 기판 위에 실리콘 산화막을 상온에서 증착하였다. 기체 유량비(SiH4/O2)가 막의 성질에 미치는 영향을 고찰하여 최적의 증착 조건을 도출하였다. 기체 유량비가 0.071일 때 비가역 파괴 전장은 9~10MV/cm 이었고, 4~5MV/cmm의 전장하에서 누설 전류는 ~10-11 A/$ extrm{cm}^2$이었다. 이러한 수치들은 액정 표시 소자용 박막 트랜지스터와 같이 저온의 제조공정이 요구되는 소자를 만들기에 충분하다.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2002.11a
• /
• pp.123-127
• /
• 2002

DRAM용 capacitor의 차세대 전극물질 후보 중의 하나인 Ru 박막을 고밀도의 ECR 플라즈마를 이용하여 식각 특성 및 식각 메커니즘을 알아보고자 하였다. 식각시 Ru은 oxygen들과 결합을 하여 RuO2 화합물들을 생성하고 RuO2 화합물들은 다시 oxygen들과 결합을 함으로써 휘발성이 강한 RuOx 화합물들을 생성하였다. 하지만 이러한 식각이 이루어지기 위해서는 oxygen이온들에 의한 충돌이 필요하며, Cl과 F 가스들을 첨가가 의해 충돌 이온의 에너지가 증가되어 RuO2와 O radical들의 반응성을 향상시켰다. 이에 휘발성이 좋은 RuO4들의 형성속도를 증가시킴으로써 식각 속도를 향상시킬 수 있었다.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.11-12
• /
• 2011

In electromagnetic coupled resonance(ECR) WPT system, the main key for wireless power transmission is the design method of the ECR coils. The ECR coils is classified to the helical coil(3D) type and the spiral coil(2D) type as a coil structure. The pattern of the spiral coil type has been studied in favor of commercialization. In this paper, the design characteristics of the helical coil and the spiral coil is considered using a Vector Network Analyzer. It is analyzed according to the distance of coupling coefficient between the ECR coils. Also, It is analyzed for the relationships such as the maximum transmission efficiency and the resonant frequency depending on the distance between the coils.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.210-210
• /
• 2003

ECR(Electron Cyclotron Resonance)은 전자기장에 의한 회전주파수와 전원으로 가해지는 마이크로웨이브(microwave)의 주파수가 일치할 때 발생하는 공진(resonance)현상이다. ECR에 의해 형성된 고밀도, 고에너지의 플라즈마가 상온하에서도 표면에너지가 낮은 고분자수지상에 접착력과 내구성 및 성능이 우수한 금속박막을 형성시킬 수 있는 특징을 지니고 있다. [1] 이러한 고분자수지 표면에 제조되는 금속박막소재는 반도체산업을 비롯하여, 박막전지, 전자파 차폐 등의 다양한 용도로 개발되고 있다. 그러나, 고분자수지와 금속박막계면간의 접착성의 저하로 후처리 공정에서 외부의 응력을 받게되면 막이 쉽게 탈리되는 문제점이 대두되었고, 이에 대한 개선이 요구되고 있다. 따라서, 본 연구에서는 공업적으로 많이 사용되는 표면 전처리방법을 통하여 구리 박막의 접착력을 향상시키고자 하였다. 상온화학증착 방법에 의해 고분자수지표면에 구리금속박막을 제조하고 여러 가지 표준방법을 사용하여 고분자수지와 구리박막간의 접착특성을 조사하였다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.163-163
• /
• 2003

TiN barrier막 위에 metal organic chemical deposition(MOCVD)법으로 RuO$_2$ 를 증착시 TiN막 표면을 세정처리하지 않을 경우 RuO$_2$의 핵생성이 어렵고, 그로 인해 RuO$_2$ 연속막이 형성되기 힘들다. 그러므로 RuO$_2$의 핵생성을 향상시키기 위해 TiN막에 대한 전처리 세정이 필수적이다. TiN막의 전처리 세정방법으로 ECR plasma 세정법을 사용하였으며, $O_2$ plasma와 H$_2$ plasma 그리고 Ai plasma를 이용해 각각의 exposure time을 변화시키며 전처리 세정을 실시하였다. H$_2$ plasma와Ar plasma의 exposure time이 증가됨에 따라 RuO$_2$의 핵생성이 향상되었다. 본 연구에서는 scanning electron microscopy(SEM), Auger electron emission spectrometry(AES), Atomic Force Microscope(AFM), X-ray diffraction (XRD) 등의 분석을 통해 TiN막 표면에 대한 ECR plasma 전처리 세정 이 RuO$_2$의 핵생성과 연속막 성장에 미치는 효과에 대해 조사하였다.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.4
• /
• pp.84-91
• /
• 1994

A compact electron cyclotron resonance(ECR) plasma system composed of a microwave generator and a magnet coil was fabricated. A Langmuir single probe was used to investigate the plasma characteristics of the system through I-V measurements. The performance of the compact ECR plasma system was tested for the case of silicon etching reaction with $CF_{4}/O_{2}$(30%) mixed gas. Electron density and etch rate increased to maximum values and then decreased with increasing argon gas pressure, but electron temperature changed in the opposite way. The electron density and the electron temperature of argon gas plasma were 0.85${\times}~5.5{\times}10^{10}cm^{-3}$ and 4.5~6.0 eV, respectively, in the pressure range from $3{\times}10^{4}$ to 0.05Torr. The etch rate reached a maximum value at the position of 2.5cm from the bottom of plasma cavity. Etch rate uniformity was $\pm$6% across 6cm wafer. Anisotropic index was 0.75 at 1.5${\times}10^{-4}$Torr.