• Journal of Digital Convergence
• /
• v.20 no.2
• /
• pp.203-215
• /
• 2022

The study is to investigate research trends and knowledge structures in the Smart Farm field. To achieve the research purpose, keywords and the relationship among keywords were analyzed targeting 104 Korean academic journals related to the Smart Farm in KCI(Korea Citation Index), and topics were analyzed using the LDA Topic Modeling technique. As a result of the analysis, the main keywords in the Korean Smart Farm-related research field were 'environment', 'system', 'use', 'technology', 'cultivation', etc. The results of Degree, Betweenness, and Eigenvector Centrality were presented. There were 7 topics, such as 'Introduction analysis of Smart Farm', 'Eco-friendly Smart Farm and economic efficiency of Smart Farm', 'Smart Farm platform design', 'Smart Farm production optimization', 'Smart Farm ecosystem', 'Smart Farm system implementation', and 'Government policy for Smart Farm' in the results of Topic Modeling. This study will be expected to serve as basic data for policy development necessary to advance Korean Smart Farm research in the future by examining research trends related to Korean Smart Farm.

• Clean Technology
• /
• v.28 no.4
• /
• pp.285-292
• /
• 2022

Adsorption tower systems based on activated carbon adsorption towers have mainly been employed to reduce the emission of volatile organic compounds (VOCs), a major cause of air pollution. However, the activated carbon currently used in these systems has a short lifespan and thus requires frequent replacement. An approach to overcome this shortcoming could be to develop metal oxide photocatalysis-activated carbon composites capable of degrading VOCs by simultaneously utilizing photocatalytic activation and powerful adsorption by activated carbon. TiO₂ has primarily been used as a metal oxide photocatalyst, but it has low economic efficiency due to its high cost. In this study, ZnO particles were synthesized as a photocatalyst due to their relatively low cost. Silver nanoparticles (Ag NPs) were deposited on the ZnO surface to compensate for the photocatalytic deactivation that arises from the wide band gap of ZnO. A microfluidic process was used to synthesize ZnO particles and Ag NPs in separate reactors and the solutions were continuously supplied with a pack bed reactor loaded with activated carbon powder. This microfluidic-assisted pack bed reactor efficiently prepared a Ag-ZnO-activated carbon composite for VOC removal. Analysis confirmed that Ag-ZnO photocatalytic particles were successfully deposited on the surface of the activated carbon. Conducting a toluene gasbag test and adsorption breakpoint test demonstrated that the composite had a more efficient removal performance than pure activated carbon. The process proposed in this study efficiently produces photocatalysis-activated carbon composites and may offer the potential for scalable production of VOC removal composites.

• Applied Chemistry for Engineering
• /
• v.34 no.1
• /
• pp.15-22
• /
• 2023

Recent studies have actively investigated ways to improve the economic feasibility and efficiency of the Fischer-Tropsch process by increasing the yields of the monocyclic aromatic compounds (BTEX). In this study, ethylene was selected as a model of F-T-derived hydrocarbons, and the ethylene-to-aromatics (ETA) reaction was investigated according to changes in acid characteristics, mesopores, and crystallinity of HZSM-5 (HZ5). Fluorinated HZ5 was prepared by calcination followed by impregnation of an aqueous NH₄F solution having different molar concentrations in HZ5, and the structural and chemical properties of F/HZ5 were investigated through Brunauer-Emmett-Teller (BET), solid-state nuclear magnetic resonance (NMR), X-ray photoelectron spectroscopy (XPS), NH₃-temperature-programmed desorption (TPD), and pyridine-IR spectroscopy. The ETA reactions were performed at 673 K under 0.1 MPa, and fluorinating HZ5 by an aqueous NH₄F solution of 0.17 M improved ethylene conversion, BTEX selectivity, and catalytic stability due to acidity, mesopore fraction, and crystallinity.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.3
• /
• pp.66-73
• /
• 2022

In order to induce users to purchase excellent products in the water industry that satisfy the technical standards of excellent products, in this study, it is to present the advantages of the cost aspect of the pumps as the objective basis. It will be to promote technology development of domestic water companies and to create a virtuous cycle structure in the water industry. In order to present an objective basis for the merits in terms of cost, an economic evaluation was conducted through life cycle cost analysis. For the LCC analysis, initial cost (pump cost and installation cost), operation cost (energy cost and maintenance cost) and demolition cost (disposal cost and residual value) are searched and calculated. As the results of comparison on two capacity of pumps, the energy cost of the excellent pump is 212 million KRW lower than the that of general pump in the large pump. The cost of excellent pump was 17 million KRW lower than that of general pump in small capacity pump. As the results of sensibility test, if the product is developed in the direction of improving pump efficiency and increasing the replacement cycle of consumables, it is predicted that the effect on LCC will be large.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.1
• /
• pp.1-8
• /
• 2023

At construction sites, interest in the production of precast materials is increasing due to off-site conditions due to changes in construction site conditions due to increased labor costs and the Act on the Punishment of Serious Accidents. In particular, the precast prestressed hollow slab has a hollow shape in the cross section, so structural performance is secured by reducing weight and controlling deflection through stranded wires. With the application of structural standards, the urgency of securing fire resistance performance is emerging. In this study, a fire-resistance cross section was developed by reducing the concrete filling rate in the cross section and improving the upper and lower flange shapes by optimizing the hollow shape in the cross section of the slab to have the same or better structural performance and economic efficiency compared to the existing hollow slab. The PC hollow slab to which this was applied was subjected to a two-hour fire resistance test using the cross-sectional thickness as a variable, and as a result of the test, fire resistance performance (load bearing capacity, heat shielding property, flame retardance property) was secured. Based on the experimental results, it is determined that fire resistance modeling can be established through numerical analysis simulation, and prediction of fire resistance analysis is possible according to the change of the cross-sectional shape in the future.

• Journal of Wetlands Research
• /
• v.25 no.2
• /
• pp.91-98
• /
• 2023

Some concrete wastewater generated during construction is in the form of non-point pollution sources that workers, managers, and users are unaware of, and it is not easy to manage as it flows through sewage pipes. Due to these characteristics, construction sludge is inflow into rivers and sewage pipes in the form of non-point pollution sources in an unmanaged state. This study applied the D.W.S method to the concrete retaining wall removal method installed on the road, and the resulting concrete wastewater was physically and chemically treated through a mobile sewage treatment facility, and it was examined whether it met the removal efficiency and wastewater discharge acceptance standards. Accordingly, it is intended to meet the standards for effluent concentration of wastewater during construction by removing 73.5% of BOD and 89.1% of SS through physical and chemical treatment through portable sewage treatment facilities during construction. In addition, we would like to review the adequacy and economic analysis of calculating environmental conservation costs for physicochemical treatment through portable sewage treatment facilities and sewage treatment generated during construction.

• Korean Journal of Social Welfare Studies
• /
• v.40 no.1
• /
• pp.297-322
• /
• 2009

Child policy has focused on needy children with special emphasis on residual services but youth policy has implemented to promote capabilities of general adolescents by various activities. The fragmented implementation of child-youth policy by several ministries resulted in possible redundancy of target groups and insufficient service delivery system. Thus, the Ministry of Health, Welfare, and Family Affairs has pushed forward to integrate service delivery systems in child-youth policy after the former Ministry of Health and Welfare and the Government Youth Commission were integrated as part of a government reorganization plan. The purpose of this study is to review limitations of Lee Myung-bak government's plan to integrate child-youth policy and to make important suggestions for effective integration. Lee Myung-bak government's plan seeks to help children and adolescents prepare for the future and move forward with dreams and hope. However, this plan has fatal problems of overemphasizing the efficiency of finance without expansion of budget for children and adolescents. To achieve well-being tailored to one's life cycle, the full-scale expansion of budget is indispensible through the induction of the special fund or the special tax for children and adolescents. Fortunately, Lee Myung-bak government recognized child-youth policy as the social investment that would heighten national competitiveness in the long term, but there was insufficient child-youth policy infrastructure for new implementation. Therefore, Lee Myung-bak government needs a new design for integrated and universal child-youth policy that should take into account national human resource development plan and its economic development policy. The public responsibility for children and adolescents should be strengthened and, in addition, the network function in service delivery system should be complemented.

• Journal of Service Research and Studies
• /
• v.12 no.3
• /
• pp.158-175
• /
• 2022

This study discusses mass unemployment and job insecurity due to the 4th industrial revolution and technological progress. In particular, the construction automation service method can contribute to increasing work productivity, preventing on-site safety accidents, and enhancing the competitiveness of the construction industry according to rapid development and convergence between technologies. However, there is great concern that the position of workers will decrease and the income distribution will deteriorate. Therefore, this study is necessary to alleviate the anxiety of the labor market and to find a direction for the government and all walks of life to ponder. To carry out this study, in-depth interviews were conducted with two experts currently engaged in the construction field, and through analysis, we intend to derive meaning and identify current trends, identify necessary improvement measures and institutional areas and suggest research directions. As a result of the analysis, it is possible to suggest a response strategy in a total of three themes: purpose, implication, and strategy. Based on this, there are response strategies in four areas: (1) industrial site response, (2) worker response, (3) education, and (4) training response, and government and corporate response. Through this study, it is necessary to revitalize economic and sociological discussions in the future so that the improvement in productivity and efficiency of society as a whole due to technological innovation of construction automation services does not lead to social problems such as an increase in the unemployment rate and a decrease in jobs in the labor market.

• Journal of the Korean Geosynthetics Society
• /
• v.22 no.2
• /
• pp.85-92
• /
• 2023

This paper describes the comparative results of measured and predicted values for the horizontal displacement of earth retaining wall based on two field cases, in order to evaluate the application of lateral earth pressure to earth retaining wall supported by earth anchor in Jeju. The prediction of lateral earth pressure acting on the earth retaining wall was performed by elasto-plastic analysis using Rankine earth pressure, Hong & Yun lateral earth pressure, Terzaghi & Peck modified lateral earth pressure, and Tschebotarioff lateral earth pressure. As a result, the predicted value of the maximum horizontal displacement for site A was about 10 to 12 times greater than the measured value, and in the case of site B, the predicted value was evaluated as about 9 to 12 times greater than the measured value. That is, both sites showed a similar increase rate in the maximum horizontal displacement by the predicted value compared to the measured value. In all field construction cases, the maximum horizontal displacement by measured values occurred in the sedimentary layer, soft rock layer, and clinker layer, and the horizontal displacement distribution was shown in a trapezoidal shape. The maximum horizontal displacement by the predicted value occurred around the clinker layer, and the horizontal displacement distribution was elliptical. In the ground with a clinker layer, the measured value showed a very different horizontal displacement tendency from the predicted value, because the clinker layer exists in the form of a rock layer and continuous layer. In other words, it is unreasonable to apply the existing prediction method, which is overestimated, because the characteristics of the earth pressure distribution in Jeju show a tendency to be quite different from the predicted earth pressure distribution. Therefore, it is necessary to conduct a research on the lateral earth pressure in the realistic Jeju that can secure more economic efficiency.

• Journal of Navigation and Port Research
• /
• v.46 no.1
• /
• pp.42-56
• /
• 2022

Due to the 4th Industrial Revolution announced at the Davos Forum, the World Economic Forum, in 2016, industrial trends around the world are changing rapidly and intelligently. Among them, the digital twin is drawing attention from all industries as a groundbreaking technology that reduces unnecessary costs and trial and error by implementing real objects, systems, and environments in the same way in the real virtual world and using them to perform simulation analysis. In particular, there is a lot of interest in the application of digital twin technology in solving ports safety and efficiency challenges at once. However, there is a lack of in-depth research for the application of digital twin technology in the port, and in particular, there is a lack of research on measurable data for the implementation of the digital twin in ports. The purpose of this study was to increase granularity and connectivity through measurable data investigation for the application of digital twin technology at container ports. Based on the study results, data factors for container port application were classified into crane data, operational data, physical data, and transportation data, and factor composition, correlation with factors, and fitness were confirmed through confirmatory factor analysis.