• Journal of the Korean Wood Science and Technology
• /
• v.20 no.1
• /
• pp.5-14
• /
• 1992

Experimental external collector type solar lumber dryer of $1m^3$ of maximum capacity with $1.6m^3$ of collector area was designed and constructed. The seasonal performance of solar dryer, including air-conditions, energy efficiency, and drying characteristics of 3cm-thick red pine and douglas-fir lumber was investigated. Also, the economic analysis was carried out. Annual average solar drying rate was about 2 times faster than air-drying rate with no significant difference in the amount of drying defects. But in initial drying stage air-drying rate in winter was much faster and those in spring and autumn were slightly slower than solar drying rate in each season. Annual average energy efficiency of solar-dryer and-collector was 25% and 57%, respectively. Fuel savings were over 50% at 15% of energy inflation rate and the payback period was estimated as 6.10 years at 30% of energy inflation rate.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05b
• /
• pp.469-472
• /
• 2006

Amount used of admixture fare is increasing for concrete economic efficiency and ability security. Security of economic efficiency and ability can expect by use of this admixture fare but is displaying a lot of problems on early age strength hold by hydrate delay relatively. Specially, in the case of construction site, concrete strength can speak that interrelation is high with mold removal of forms time. Therefore, is economical and need examination of plan that can secure robber within 3 days using admixture fare such as fly ash and blast furnace slage differential speech to secure function. In this study, adding liquid admixture within 1% of a binding agent quantity to examine these problem with physical characteristic after hardening ago specially, strength change at standard and air dry curing of observed change in priority. Air dried and water curing total strength enhancement effects appeared by thing which is in case of add test result liquid admixture by below 1% and strength deputy by passage of age could know is not big.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.11a
• /
• pp.229-230
• /
• 2011

We could see that, the thinner the retaining wall is, the more advantageous Premixed Agent Type Waterproof method is in the aspect of economic efficiency. The reason is because, in the case of Premixed Agent Type Waterproof method, the thicker the retaining wall is, the higher the construction cost increases due to increase in the material quantity required which increases in proportion to the area in the case of Premixed Agent Type Waterproof method. We could see that, the thinner the retaining wall is, the more inferior the economic efficiency of Infiltration Type Waterproof method is to that of Premixed Agent Type Waterproof method, as, in the case of Infiltration Type Waterproof method, the quantity of material required is fixed in proportion to the area. Consequently, we concluded that Premixed Agent Type Waterproof method is economically advantageous up to the wall thickness of 700 mm and Infiltration Type Waterproof from 800 mm.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.2
• /
• pp.349-352
• /
• 2015

This paper estimates electrical fire damage cost-effect to analyze electrical safety efficiency by applying a cost-benefit analysis method for analyzing the efficiency of a business public interest. Electrical fire loss statistics data was presented as direct costs and casualties, including deaths due to an electrical fire, this paper adds overhead "Incidental Cost of Accidents to the Employer" by W. H. Heinrich was applied to estimate the cost of economic loss. Also wounded, including the loss of human deaths by referring to the car accident insurance claims costs and human development estimated the losses caused by an electrical fire. And to perform a cost-benefit analysis of the electrical safety as a result of future work. In this paper, the economic effect of the electric field of safety and public interest work to systematically presented.

• Journal of Families and Better Life
• /
• v.15 no.3
• /
• pp.73-82
• /
• 1997

The purpose of this study was (1) to explore the diffusion process of household capital goods(2) to examine the economic and social factors influencing on the diffusion process and to discuss whether the household capital goods would be introduced for the efficiency of housework. For the purpose this study made use of all sorts of literature. The results were summarized as follows: Household capital goods were developed about the time of 1960's and were spreaded in 1980's In this course such socio-economic factors as the development of electronic industry the price change of household capital goods and services the decrease of employed housekeepers and the increase of income level in fluenced on the diffusion process. It seemed that houehold capital goods were not introduced only for the efficiency of housework.

• Journal of Energy Engineering
• /
• v.2 no.1
• /
• pp.83-94
• /
• 1993

In this paper, the performance of an energy conversion system is analyzed using two efficiency concepts, one of conventional and the other of energetic efficiently. The objective of this analysis was to improve and optimize the energy conversion system in point, namely, and LNG-fired Combined Heat and Power Plant (CHP). To this end, energies which represent the true efficiency figures were evaluated for various flows of the system with a set of system configurations given. Then the economic values of the energies were assigned to respective flows and subsystems. With these economic data locations of inefficiencies and opportunities for improvement are identified.

• East Asian Economic Review
• /
• v.24 no.3
• /
• pp.275-301
• /
• 2020

We analyze state-level matching efficiencies in the Indian labor market using stochastic frontier analysis. The key contribution of this research is the estimation of matching efficiencies at the state level because these can be used for a state-level measure of labor market conditions. Next, we explore the relationship between the estimated matching efficiencies and population density, labor market flexibility, and the Ease of Doing Business index, respectively. The results show that matching efficiency is heterogeneous across states with considerable variation in accordance with the regional diversity in India. However, we find that there is little relationship between the estimated matching efficiencies and the labor market conditions of interest, suggesting that other regional diversity affects matching efficiencies across states in India.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.5
• /
• pp.327-333
• /
• 2008

The purpose of this study is to develop a paddle-type dryer and to commercialize the dryer, in which mixing and drying can be done simultaneously. According to a performance test, a newly-designed paddle-type dryer can dry Chitosan salt to a low moisture contents below 0.3%. Also the newly-designed dryer can dry air pollution materials, because the dryer can operate in a closed system. The economic efficiency of a newly-designed system and an existing system was compared in a performance test. As a result, the economic efficiency of a newly-designed system was higher than an existing system. In conclusion, it is thought that the newly-designed system has a high commercial value.

• International Journal of Advanced Culture Technology
• /
• v.12 no.3
• /
• pp.317-324
• /
• 2024

In terms of corporate sustainability management, the footwear industry is still at a very early stage compared to other sectors, and footwear, especially sneakers, is not as far along as apparel due to the nature of the product. As a result, there is a lack of research on sustainability in the sneaker industry in the academic community. Thus, this study analyzed the sustainability practices of three leading brands in the sneaker market, adidas, allbirds, and NIKE, in order to provide basic data for expanding sustainability in the sneaker industry. The study found that the characteristics of sustainable management in sneaker brands are economic efficiency, environmental circularity, social integration, and governance soundness. Sustainable management is increasingly recognized as an essential task in modern society, and as the sneaker market expands, the demand for CSM from relevant brands will grow accordingly. Therefore, the results of this study will help to set policy directions for sneaker brands pursuing sustainable management.

• Steel and Composite Structures
• /
• v.53 no.1
• /
• pp.115-121
• /
• 2024

The present paper deals with a comprehensive study about dynamic performance and educational economic assessment of nanocomposite structures, while it focuses on truncated conical shells. Advanced structure dynamic behavior has been analyzed by means of AI techniques, which allow one to predict and optimize their performances with good accuracy for different loading and environmental conditions. The incorporation of the AI method significantly enhances the computational efficiency and is a powerful tool in designing nanocomposites and for their structural analysis. Further, an educational assessment is provided in the context of cost and practicality related to such structures in engineering education. This study showcases the capabilities of AI-enabled methods with regard to cost reduction, improvement of structural efficiency, and enhancement of learning engagement for students through certain practical examples on state-of-the-art nanocomposite technology. The results also confirm a remarkable capability of artificial intelligence regarding the optimization of both dynamic and economic aspects, which could be highly valued for further development of nanocomposite structures.