• 제목/요약/키워드: ECG sensor module

검색결과 19건 처리시간 0.026초

전원잡음과 기저선변동을 고려한 이동형 ECG 센서모듈 및 모니터링 시스템 구현 (Portable ECG Sensor Module and Monitoring System Implementation Considering Reduction of Powerline Noise and Baseline Wander)

  • 오도창;최동혁;이홍우
    • 제어로봇시스템학회논문지
    • /
    • 제12권10호
    • /
    • pp.1022-1028
    • /
    • 2006
  • A portable ECG sensor module and monitoring system which has the powerline noise reduction and the baseline wander removal is proposed. A small-szie ECG sensor H/W module with the 8-bits microprocessor is implemented. The ECG waveform can be inspected anytime with PDA in real time, and transmitted to the PC through wireless LAN. Portable ECG system can offer the environment that give the lasting medical service to the elderly and the long-time hospitalized patients at the wanted place, and the system can be attached to the chair, wheel chair, treadmill, elderly walker and used to monitor the health condition of man

실시간 위험환경 관리를 위한 센서 모듈시스템 연구 (A Study on the Sensor Module System for Real-Time Risk Environment Management)

  • 조영창;권기진;정종혁;김민수
    • 전기전자학회논문지
    • /
    • 제22권4호
    • /
    • pp.953-958
    • /
    • 2018
  • 본 연구에서는 산업현장, 지하시설물의 밀폐공간에서 유해가스 및 생체신호를 동시에 검출이 가능한 휴대형 검출시스템을 개발하였다. 개발된 시스템은 가스검출용 센서모듈, 패치형 1채널 소형 ECG 센서, 3축가속도 검출센서용 모듈 및 통계분석용 시스템이다. 시스템모듈의 성능을 검증하기 위해 디지털해상도, 생체신호증폭도, 출력전압 및 초소형모듈의 크기로 평가하였다. 개발된 시스템의 성능결과 디지털해상도는 300(rps), 신호증폭이득은 500dB이상 성능을 가졌고, 심전도 모듈은 $50mm{\times}10mm{\times}10mm$로 제작되어 패치형으로 활용도를 높일 수 있다. 본 연구의 휴대용 가스검출기 및 패치용 심전도, 가속도검출기는 산업현장작업자의 실시간 감시용 IoT 기반 관리시스템으로 활용한다면 가치가 높을 것으로 생각된다.

Mobile Healthcare System Based on Bluetooth Medical Device

  • Kim, Jeong-Heon;Lee, Seung-Chul;Lee, Boon-Giin;Chung, Wan-Young
    • 센서학회지
    • /
    • 제21권4호
    • /
    • pp.241-248
    • /
    • 2012
  • Recently healthcare industry such as pharmaceutical, medical device and healthcare service technology is growing significantly. Mobile healthcare has attracted big attention due to IT convergence technology. Paradigm of healthcare has been changed from the 1st generation(communicable disease prevention) and the 2nd generation(treatment of disease due to extended life expectancy) to the 3rd generation(extended life expectancy due to prevention and control). In our study, we suggest the 3rd generation mobile healthcare system using Bluetooth based wearable ECG monitoring system and smart phone technology. The mobile healthcare system consists of wearable shirts with Bluetooth communication module, ECG sensor, battery, and mobile phone. The ECG data is obtained by a miniaturized sensor and the data is transferred to a mobile phone using Bluetooth communication. Then, user can monitor his/her own ECG signal on an application using Android in mobile phone. The Bluetooth communication device is used due to highly reliable data transmission property and the Bluetooth chip is embedded in every mobile phone. The wearable shirts with chest belt of Bluetooth ECG module is designed with a focus on convenience in the daily life of a wearer. The ECG signal evaluation software in Android based mobile phone is developed for the health check and the ECG signal variation is tested according to the activities of the wearer such as walking, climbing stairs, stand up and sit down, and so on.

지그비 기반 심전계의 데이터 전송률과 소비 전력 분석 (Analysis of Data Transmission Rate and Power Consumption in Zigbee Based Electrocardiography)

  • 김남진;홍주현;이태수
    • 한국콘텐츠학회논문지
    • /
    • 제6권12호
    • /
    • pp.96-104
    • /
    • 2006
  • 본 연구에서는, 심전도 송수신 장치의 개발을 위한 지그비(Zigbee) 기반 무선 센서 모듈과 PDA(Personal Digital Assistant)의 데이터 전송률과 전력 소비에 대하여 분석 하였다. 데이터 전송률은 패킷(Packet) 구조에 의존적이며, 패킷을 2개의 심전도 데이터와 1개의 3축 가속도 벡터로 구성하였을 때, 초당 300 샘플의 전송률을 나타내었다. 두 개의 AAA 전지를 직렬로 연결하여, 센서 모듈의 동작 시간은 평균적으로 28시간 이었다. PDA의 전력 소비는 화면의 ON/OFF 여부와 시리얼 포트의 사용 여부 및 패턴에 의존적임을 알 수 있었다. 이러한 응용에서, PDA 동작 시간은 평균적으로 5시간 정도임을 확인하였으며, 이때, PDA는 논 블로킹 모드로 시리얼 포트로부터 전송된 데이터를 수신 한다. 결론적으로, 본 연구에서 개발된 장치를 24 시간 홀터(Holter) 심전계로 응용할 경우, 센서 모듈의 전력 소비와 전송 속도에는 문제가 없었으나, PDA는 전력 소모율에 문제가 있으며 이는 해결되어야할 과제이다.

  • PDF

착용형 응급의료 경보시스템 구현에 관한 연구 (A Study on Wearable Emergency Medical Alarm System)

  • 김동완;백승화
    • 전기전자학회논문지
    • /
    • 제10권1호
    • /
    • pp.55-61
    • /
    • 2006
  • 현대 사회는 의료 기술의 발달로 인한 인간 수명의 연장과 핵가족화로 인하여 혼자 지내는 노인이 많아지면서 응급상황 발생시 신속한 의료서비스를 받지 못하는 경우가 많아지고 있다. 또한 대표적인 성인병인 심혈관질환과 뇌졸중 그리고 노인의 건강에 치명적인 낙상의 발생율도 높아지고 있는 추세이다. 본 논문에서는 심전도, 체온, 사용자의 움직임 등의 생체신호를 획득하고 획득된 생체신호를 분석하여 심혈관질환, 뇌졸중, 낙상 등의 응급상황 발생시 응급의료센터와 보호자에게 구조메시지를 전송할 수 있는 시스템을 제안하였다. 시스템은 크게 생체신호 획득부와 모바일부 두 부분으로 나눌 수 있다. 생체신호 획득부는 사용자에 따라 생체신호의 추가, 제거가 어렵다는 단점을 보완하기 위해 심전도, 체온, 가속도 센서 모듈로 모듈화 하여 구성하였다. 모바일부는 생체신호 획득부로부터 전송된 생체신호의 처리 및 응급상황시 메시지 전송, 생체신호의 디스플레이 역할을 수행하며, 생체신호 획득부에서 획득된 생체신호는 블루투스 모뎀을 통하여 모바일부로 전송된다. 또한 모바일부에서 처리된 신호는 802.11b 무선랜을 통하여 PC로 전송된다.

  • PDF

ECG와 호흡 측정이 가능한 모바일 헬스케어 의류 시스템 (The Mobile Health-Care Garment System for Measurement of Cardiorespiratory Signal)

  • 김정도;김갑진;정기수;이정환;안진호;이상국
    • 정보처리학회논문지A
    • /
    • 제17A권3호
    • /
    • pp.145-152
    • /
    • 2010
  • 대부분의 모바일 웨어러블 헬스케어 모니터링 의류 시스템은 생체신호를 측정할 수 있는 센서와 데이터 취득과 무선 통신 및 제어를 담당하는 회로부, 이들을 내장하는 의복으로 구성된다. 기존의 의복형 헬스케어 시스템은 센서를 의복에 장시간 내장하기가 어렵고, 피부 접촉 시 시간에 따라 저항 값이 변화하기 때문에 장기적인 생체 신호 모니터링이 쉽지 않으며, 센서 전극과 회로 사이에 존재하는 신호선의 물리적 장애 요인도 가지고 있다. 본 연구에서는 이러한 문제점들을 해결하기 위하여, PVDF에 PEDOT 재료를 코팅하여 만든 패브릭 나노웹 ECG 전극과 PVDF 필름을 사용한 호흡 센서를 $10\;{\mu}m$ 두께의 디지털 실을 이용하여 사용자의 의류와 일체화하였다. 탈부착이 가능한 무선 블루투스(Bluetooth) 내장 스테이션과 디지털실로 기존 의류와 일체화한 생체 신호 측정용 의류 제작을 통해, 휴대폰에서 손쉽게 심전도(ECG)와 맥박신호를 표시 할 수 있었다.

RF 무선통신 기술을 이용한 심전도 및 온.습도 측정 시스템 (The Measurement System of ECG, Temperature and Humidity Using RF wireless Communication Technique)

  • 임진희;남효덕;정우철
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2007년도 추계학술대회 논문집
    • /
    • pp.356-357
    • /
    • 2007
  • In this paper, we developed an integrated miniaturized device which acquires and transmits the signal of ECG an interested heartbeat and body's temperature and humidity. Using an amplifier circuit on the electrodes and the radio frequency transmission, the developed system dispenses with the use of cables among the electrodes, amplifier, and the post processing system. The sensor signals are transmitted to the RF-wireless terminal that was developed using the micro controller Aduc812, LCD, RF-module (frequency 424MHz, 9600-bps). In results, the developed system improves not only the signal-to-noise ration in dynamic ECG & and body's temperature and humidity measurement, but also the user convenience.

  • PDF

Design and Implementation of Ubiquitous Sensor Network System for Monitoring the Bio-information and Emergency of the Elderly in Silver Town

  • Choi, Seong-Ho;Park, Hyung-Kun;Yu, Yun-Seop
    • Journal of information and communication convergence engineering
    • /
    • 제8권2호
    • /
    • pp.219-222
    • /
    • 2010
  • An ubiquitous sensor network (USN) system to monitor the bio information and the emergency of the elderly in the silver town is presented. The USN system consists of the sensor node platforms based on MCU of Atmage128L and RF Chip of CC2420 satisfying IEEE 802.15.4, which includes the bios sensor module such as the electrocardiogram (ECG) sensor and the temperature sensor. Additionally, when an emergency of the elderly is occurred in the silver town, the routing algorithm suitable to find and inform the location of the elderly is proposed, and the proposed routing algorithm is applied to the USN. To collect and manage the ECG data at the PC connected to the sink node, LabView software is used. The bio information and the emergency of the elderly can also be monitored at the client PC by TCP/IP networks in the USN system.

Continuous Blood Pressure Monitoring using Pulse Wave Transit Time

  • Jeong, Gu-Young;Yu, Kee-Ho;Kim, Nam-Gyun
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2005년도 ICCAS
    • /
    • pp.834-837
    • /
    • 2005
  • In this paper, we describe the method of non-invasive blood pressure measurement using pulse wave transit time(PWTT). PWTT is a new parameter involved with a vascular that can indicate the change of BP. PWTT is measured by continuous monitoring of ECG and pulse wave. No additional sensors or modules are required. In many cases, the change of PWTT correlates with the change of BP. We measure pulse wave using the photo plethysmograph(PPG) sensor in an earlobe and we measure ECG using the ECG monitoring device our made in the chest. The measurement device for detecting pulse wave consists of infrared LED for transmitted light illumination, pin photodiode as light detector, amplifier and filter. We composed 0.5Hz high pass, 60Hz notch and 10Hz low pass filter. ECG measurement device consists of multiplexer, amplifier, filter, micro-controller and RF module. After amplification and filtering, ECG signal and pulse wave is fed through micro-controller. We performed the initial work towards the development of ambulatory BP monitoring system using PWTT. An earlobe is suitable place to measure PPG signal without the restraint in daily work. From the results, we can know that the dependence of PWTT on BP is almost linear and it is possible to monitoring an individual BP continuously after the individual calibration.

  • PDF

통합형 메디컬센서노드와 모바일 환자생체정보 관리 시스템 설계 (Design of Integrated medical sensor node and Mobile Vital Healthcare diagnosis System)

  • 이승철;권태하;정완영
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2009년도 춘계학술대회
    • /
    • pp.302-305
    • /
    • 2009
  • 본 논문에서는 환자나 만성질환자가 공간적으로 구속을 받지 않고 자유롭게 이동이 가능한 상태에서 건강상태 모니터링이 가능한 셀룰러폰(Cellular telephone)에 기반한 통합형 생체신호 계측 및 생체정보 관리가 가능한 생체 관리 시스템을 설계하고자 하였다. 메디컬센서 인터페이스를 센서노드에 부착할 경우 개별적인 센서노드가 필요하기 때문에 생체 디바이스의 문제점을 해결하기 위해서 통합형 메디컬 센서노드 어플리케이션을 설계하였다. 셀룰러폰으로 ECG(Electrocardiogram), 혈압(Blood pressure), 혈당(Blood sugar)과 같은 생체신호를 모니터링해서 비정상적인 생체신호를 판별하며, 당일 측정한 생체신호를 셀룰러폰에 저장해 과거에 측정한 메디컬 기록들과 함께 차트로 리뷰 가능하다. 본 논문에서는 기존의 실시간 생체 모니터링 비해, 개발된 셀룰러폰 기반의 헬스케어용 관리시스템은 고/저혈압, 당료를 갖고 있는 만성질환자가 상시적으로 질병을 관리할 수 있으며, 또한 CDMA의 특성상 넓은 환경에서도 전송이 가능하무로서 무선센서네트워크를 이용하기 위해 CDMA 방식과 통합하였다.

  • PDF